Use of Pulverized Fuel Ash in Trench Backfill
Publication: Journal of Materials in Civil Engineering
Volume 12, Issue 3
Abstract
A study was made of the use of pulverized fuel ash (PFA) mixtures to make a flowable material to backfill trenches. An optimum mix was designed to comply with current national specifications. The 4:8:1 (PFA:sand:cement) mix gave a compressive strength six times that of PFA:cement and 2.5 times that of sand:cement for the same (PFA + sand):cement ratio. Frost resistance was generally good. The material showed no expansion when tested in accordance with the freeze-thaw test procedure given in BS 812: Part 124. The use of calcium chloride to improve early strength was more effective than the two commercially available accelerators investigated. More work is needed to improve the early strength in cold weather and reduce cement content of the mix. A field trial showed that cementitious materials were better than conventional Type 1 granular subbase, both in terms of having less permanent deformation and elastic deflection. The cost of PFA:sand:cement trenchfill mixtures was within 10–15% of that of foamed concrete.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bell, I. ( 1984). “An evaluation of the impact soil tester for monitoring the degree of compaction achieved during reinstatement.” No. 46.043, British Gas Engrg. Res. Station, British Cement Association.
2.
British Standard Institute (BSI). ( 1982). “Concrete admixtures: Specification for air-entraining admixtures.” BS 5075: Part 2, London.
3.
British Standards Institute (BSI). ( 1990). “Methods of tests for soils for civil engineering purposes: Compaction related tests.” BS 1377: Part 4, London.
4.
British Standards Institute (BSI). ( 1997). “Pulverized-fuel-ash: Specification for pulverized-fuel-ash for use with portland cement.” BS 3892: Part 1, London.
5.
Clarke, B. G. ( 1991). “Use of pulverised fuel ash as an engineering fill.” Nat. Ash Seminar, Birmingham, U.K.
6.
Compston, D. G., Cray, P., Schofield, A. N., and Shann, C. D. (1978). “The design and construction of buried thin wall pipes.” Rep. 78, CIRIA.
7.
Department of Transport. ( 1992). Specification for the reinstatement of openings in highways, Highway Authorities and Utilities Committee.
8.
Funston, J. J., Krell, W. C., and Zimmer, F. V. (1984). “Flowable fly ash: A new cement stabilized backfill.” Civ. Engrg., ASCE, 54(3), 48–51.
9.
Ghataora, G. S., Alobaidi, I. M., and Billam, J. (1996). “Shallow trench reinstatement.” Proj. Rep., University of Birmingham, U.K.
10.
Head, K. H. (1982). Manual of soil laboratory testing, Vol. 2, Pentech Press, London, U.K.
11.
Maher, M. H., and Balaguru, P. N. (1993). “Properties of flowable high-volume fly ash-cement composite.”J. Mat. in Civ. Engrg., ASCE, 5(2), 212–225.
12.
Neville, A. M. (1986). Properties of concrete, 5th Ed., Longman's, London.
13.
Peindl, R. D., Janardhanam, R., and Burns, F. (1992). “Evaluation of flowable fly-ash backfill. I: Static loading.”J. Geotech. Engrg., ASCE, 118(3), 449–463.
14.
Polatty, J. M. (1982). “Highway grouting: A permeable grout provides drainage below a concrete pavement.” Proc., ASCE Conf. on Grouting in Geotech. Engrg., ASCE, New York, 849–858.
15.
Roe, P. G., and Webster, D. C. (1984). “Specification for the TRL frost heave test.” Supplementary Rep. SR 829, Transport and Road Research Laboratory, Crowthorne, U.K.
Information & Authors
Information
Published In
History
Received: Feb 24, 1998
Published online: Aug 1, 2000
Published in print: Aug 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.