Microstructure of Composite Material from High-Lime Fly Ash and RPET
Publication: Journal of Materials in Civil Engineering
Volume 12, Issue 1
Abstract
Tests on composite material from high-lime (ASTM class C) fly ash and recycled polyethylene terephthalate (RPET) were conducted to investigate the physiomechanical properties and microstructure features. Composite specimens with varying fly ash concentrations were tested in compression and tension, immersed in water to measure water absorption, and observed for shrinkage during manufacturing. Theoretical equations from modulus of elasticity and tensile strength were derived with values compared to portland cement concrete. Microstructural features associated with crack propagation during compression loading and the RPET binding mechanism were studied utilizing scanning electron and polarized reflective light microscopy and differential scanning calorimetry. The results of this investigation showed that the fly ash concentration contributed significantly to both the strength of composite material and the crystallinity of the RPET binder. Based on the evidence, it was concluded that the composite material is a value-added material with a variety of potential construction applications.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Basta, N., Ondrey, G., Rajagopal, R., and Kamiya, T. (1997). “Plastics recyclers scramble for scraps.” Chem. Engrg., 104(6), 43–119.
2.
Bergenn, W., and Rigby, R. B. (1985). “Tough engineering thermoplastics.” Chem. Engrg., Prog., Jan., 36–38.
3.
Bergeson, K. L., Schlorholtz, C., and Demirel, T. ( 1988). “Development of a rational characterization method for Iowa fly ash.” Iowa DOT Proj. HR-286, Engrg. Res. Inst. Proj. 1847, Iowa State Univ., Ames, Iowa.
4.
Chen, I., and Shiah, C. (1989). “Producing tough PET/HDPE blends from recycled beverage bottles.” Plastics Engrg., 33–35.
5.
Cohen, M. D. (1995). “Special cements and concretes.” The civil engineering handbook. W. F. Chen, ed., CRC Press, New York.
6.
Delwar, M., Fahmy, M., and Taha, R. (1997). “Use of reclaimed asphalt pavements as an aggregate in portland cement.” ACI Mat. J., 94(3), 251–256.
7.
Ehrig, R. (1992). Plastic recycling. Oxford University Press, New York.
8.
Fann, M., Huang, S. K., and Lee, J. (1998). “DSC studies on the crystallization characteristics of poly(ethylene terephthalate) for blow molding applications.” Polymer Engrg. and Sci., 38(2), 265–273.
9.
Gabriele, M. C. (1997). “PET finds growing use in non-food containers.” Modern Plastics, 60–65.
10.
Li, Y., White, D. J., and Peyton, L. (1998). “Composite material from fly ash and post-consumer PET.” Resources, Conservation and Recycling, 24(2), 87–96.
11.
MacDermott, C. P., and Shenoy, A. V. (1997). Selecting thermoplastics for engineering applications. Marcel Dekker, New York.
12.
Miller, E. (1996). Introduction to plastics and composites. Marcel Dekker, New York.
13.
U.S. Department of Transportation. (1995). “Fly ash facts for highway engineers.” Rep. No. FHWA-SA-94-081, Federal Highway Administration, Washington, D.C.
14.
Wang, C., and Salmon, C. G. (1992). Reinforced concrete design. HarperCollins, New York.
Information & Authors
Information
Published In
History
Received: Nov 10, 1998
Published online: Feb 1, 2000
Published in print: Feb 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.