Evaluation of Arabian Asphalt Binder for Low-Temperature Cracking
Publication: Journal of Materials in Civil Engineering
Volume 10, Issue 1
Abstract
The rheological properties of asphalt binder have a great influence on asphalt pavement performance, particularly in terms of rutting, thermal, and fatigue cracking. The current asphalt specifications, such as those used in Arabian Gulf countries, are based on conventional consistency tests focused on the workability of asphalt during the construction of pavements. These methods do not have the capability to predict pavement behavior and performance. This study is an effort to address the importance of adopting newly developed asphalt specification tests by the Strategic Highway Research Program (SHRP), to characterize and evaluate Arabian Gulf produced asphalts in terms of low-temperature cracking. The major finding of this study has been that all Arabian Gulf asphalts can satisfactorily withstand the low-temperature effects prevailing in the area.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Al-Abdul Wahhab, H. I., Ali, M. F., Asi, I. M., and Al-Dubabe, I. A. (1994). “Adaptation of SHRP performance based asphalt specification to the Gulf countries.”Progress Rep. No. 2, AR-14-60, King Abdulaziz City for Sci. and Technol., Riyadh, Saudi Arabia.
2.
Anderson, D. A., and Kennedy, T. W.(1993). “Development of SHRP binder specification.”Proc., Assoc. of Asphalt Paving Technologists, 62, 481–507.
3.
“Background of SWRP asphalt binder test methods.” (1993). Asphalt Inst., Nat. Asphalt Training Ctr., Fed. Hwy. Admin., Ofc. of Technol. Applications, Washington, D.C.
4.
Bahia, H. U., Anderson, D. A., and Christensen, D. W.(1992). “The bending beam rheometer; a simple device for measuring low-temperature rheology of asphalt binder.”Proc., Assoc. of Asphalt Paving Technologists, 61, 117–153.
5.
Button, J. W., Jawle, M., Jagadam V., and Little, D. (1993). “Evaluation and development of pressure aging vessel for asphalt cement.”Transp. Res. Record 1391, Nat. Res. Council, Washington, D.C., 11–19.
6.
Finn, F. N., Nair, K., and Hilliard, J.(1976). “Minimizing cracking of asphalt concrete pavements.”Proc., Assoc. of Asphalt Paving Technologists, 45, 492–529.
7.
Harrington-Hughes, K. (1994). “SUPERPAVE II: the long and binding road.”World Hwy. Int. Rd. Fedn. Official J., 15.
8.
Jung, D. H., and Vinson, T. S. (1994a). “Low-temperature cracking: binder validation.”SHRP-A-399, Nat. Res. Council, Washington, D.C.
9.
Jung, D. H., and Vinson, T. S. (1994b). “Low-temperature cracking: test selection.”SHRP-A-400, Nat. Res. Council, Washington, D.C.
10.
King, G. N., Harders, O., and Chaverot, P.(1992). “Influence of asphalt grade and polymers concentration on low-temperature performance of polymer modified asphalt.”Proc., Assoc. of Asphalt Paving Technologists, 61, 29–66.
11.
King, G. N., King, H. W., Harders, O., Arand, W., and Planche, P.(1993). “Influence of asphalt grade and polymers concentration on low-temperature performance of polymer modified asphalt.”Proc., Assoc. of Asphalt Paving Technologists, 62, 1–22.
12.
Kulash, D. J. (1994). “Towards performance-based specifications for bitumen and asphalt mixtures.”Proc., Inst. of Civ. Engrgs. Transp., 187–194.
13.
Kumar, A., and Goetz, W. H.(1977). “Asphalt hardening as affected by film thickness, voids, and permeability in asphaltic pavements.”Proc., Assoc. of Asphalt Paving Technologists, 46, 571–605.
14.
Lytton, R. L., Uzan, J., Fernando, E. G., Rougue, R., Hiltunen, D., and Stoffels, S. M. (1994). “Development and validation of performance prediction models and specifications for asphalt binder and paving mixes.”SHRP-A-357, Nat. Res. Council, Washington, D.C.
15.
Majidzadeh, K., and Schweyer, H. E. (1968). “Viscoelastic response of aged asphalt cements.”Hwy. Res. Record 231, Nat. Res. Council, Washington, D.C., 50–61.
16.
Page, G. C., Murphy, K. H., Ruth, B. E., and Roque, R.(1985). “Asphalt binder hardening—causes and effects.”Proc., Assoc. of Asphalt Paving Technologists, 54, 140–167.
17.
Ruth, B. E. (1977). “Prediction of low-temperature creep and thermal strain in asphalt concrete pavement.”Low-temperature properties of bituminous materials and compacted bituminous paving mixtures, ASTM STP 628, C. R. Mark, ed., ASTM, Philadelphia, Pa., 68–94.
18.
Schweyer, H. E., Baxley, R. L., and Burns, A. M. (1977). “Low-temperature rheology of asphalt cement—rheological background.”Low-temperature properties of bituminous materials and compacted bituminous paving mixtures, ASTM STP 628, C. R. Mark, ed., ASTM, Philadelphia, Pa., 5–42.
19.
Sisko, A. W. (1968). “Tensile strength of asphalt films and road life.”Hwy. Res. Record 231, Nat. Res. Council, Washington, D.C., 62–67.
20.
“Standard definitions of terms relating to materials for roads and pavements.” (1982). ASTM D8-81, Annual book of ASTM standards, road, paving, bituminous materials; traveled surface characteristics, Part 15, ASTM, Philadelphia, Pa.
21.
“Standard practice for accelerated aging of asphalt binder using pressurized aging vessel.” (1994a). AASHTO Designation PP1, the SUPERPAVE mix design system manual of specifications test methods and practices SHRP-A-379, Nat. Res. Council, Washington, D.C.
22.
“Standard test method for determining the rheological properties of asphalt binder using dynamic shear rheometer.” (1994b). AASHTO Designation TP5, the SUPERPAVE mix design system manual of specifications test methods and practices SHRP-A379, Nat. Res. Council, Washington, D.C.
23.
“Standard test method for determining the flexural creep stiffness of asphalt binder using bending beam rheometer.” (1994c). AASHTO Designation TP1, the SUPERPAVE mix design system manual of specifications test methods and practices SHRP-A379, Nat. Res. Council, Washington, D.C.
24.
“Standard test method for determining the fracture properties of asphalt binder in direct tension.” (1994d). AASHTO Designation TP3, The SUPERPAVE mix design system manual of specifications test methods and practices SHRP-A-379, Nat. Res. Council, Washington, D.C.
25.
Verhasselt, A. F., and Choquet, F. S. (1993). “Comparing field and laboratory aging of bitumen on a kinetic basis.”Transp. Res. Record 1391, Nat. Res. Council, Washington, D.C., 30–38.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Feb 1, 1998
Published in print: Feb 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.