Characterization of Polyester Polymer and Polymer Concrete
Publication: Journal of Materials in Civil Engineering
Volume 5, Issue 1
Abstract
The compressive and tensile properties of polyester polymer and polymer concrete were studied under various curing conditions, temperature, and strain rate. The curing temperature was varied from room temperature to 80°C. The strain rate was varied between 0.01% to 60% strain per minute and the temperature between 22°C and 120°C. The optimum curing condition for polymer and polymer concrete are different. The strength, failure strain, modulus, and stress‐strain relationship of polyester polymer and polymer concrete are influenced by the curing method, testing temperature, and strain rate to varying degrees. The influence of test variables on the mechanical properties of polymer and polymer concrete are quantified. Pretreating the aggregates with a silane coupling agent further enhances the compressive and tensile strength of the polymer concrete. The compressive strength of polymer and polymer concrete are related to their compressive modulus and splitting tensile strength. A constitutive model is used to predict the compressive stress‐strain behavior of polymer and polymer concrete.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bares, R. A. (1978). “Furane resin concrete and its application to large diameter sewer pipes.” SP 58‐4, American Concrete Institute, Detroit, Mich., 41–74.
2.
Chen, V. L., Chen, E. S., and Vivatrat, V. (1985). “Constitutive modeling of sea ice.” Proc., Offshore Tech. Conf. 5057, Society of Petroleum Engineers, 343–351.
3.
Cohen, L. J., and Ishai, O. (1967). “The elastic properties of three‐phase composites.” J. Composite Mat., 1, 390–403.
4.
Czarnecki, L. (1985). “The status of polymer concrete.” Concrete Int., 17(7), 47–53.
5.
Demura, K., Ohama, Y., Yamamoto, T., and Koniyama, M. (1981). “Field trial of polyester concrete for protection of stilling basin at hydroelectric power station.” Proc., 3rd Int. Cong. on Polymers in Concrete, 1, 614–623.
6.
Fontana, J. J., and Bartholomew, J. (1981). “Use of concrete polymer materials in transportation industry.” ST 69‐2, Applications of Polymer Concrete, American Concrete Institute, Detroit, Mich., 21–43.
7.
Fowler, D. (1987). “Current status of polymers in concrete.” Proc., 5th Int. Cong. on Polymers in Concrete, 3–8.
8.
Fowler, D. (1990). “Future trends in polymer concrete.” SP 116, American Concrete Institute, Detroit, Mich., 129–143.
9.
“Guide to the use of polymers in concrete.” (1986). ACI J., 83(5), 798–829.
10.
Haddad, M. U., Fowler, D. W., and Paul, D. R. (1983). “Factors affecting the curing and strength of polymer concrete, ACI J., 396–402.
11.
Lawrence, J. R. (1966). Polyester resin, reinhold plastics applications series. Reinhold Publishing Corp., New York, N.Y.
12.
Lou, X. (1981). ‘Studies on cracking and its prevention related to diphenol A polyester mortar and concrete.” Proc., 3rd Int. Cong. on Polymers in Concrete, 1, 490–503.
13.
Moehlenpah, A. E., Ishai, O., Dibenedetto, A. T. (1971). “Effect of time and temperature on the mechanical behavior of epoxy composites.” Polym. Engrg. Sci., 13, 129–138.
14.
Nielsen, L. E. (1974). Mechanical properties of polymers and composites, Vol. 2, Marcel Dekker, Inc., New York, N.Y.
15.
Ohama, Y. (1973). “Mix proportions and properties of polyester resin concretes.” Polym. in Concrete, SP‐40, ACI, 183–294.
16.
Vipulanandan, C., and Dharmarajan, N. (1987a). “Fluxural behavior of polyester polymer concrete,” Cement and Concrete Res. 17(2), 219–230.
17.
Vipulanandan, C., and Dharmarajan, N. (1987b). “Bonding agent in polyester polymer concrete.” Tuthill Int. Symp., SP‐104, ACI, 69–84.
18.
Vipulanandan, C., Dharmarajan, N., and Ching, E. (1988). “Mechanical behavior of polymer concrete systems.” Mat. Struct., 21(124), 268–277.
19.
Vipulanandan, C., and Paul, E. (1988). “Mechanical properties of epoxy and polyester polymers and polymer concrete systems.” Rep. No. UHCE 88‐13, Dept. of Civil Engrg., Univ. of Houston, Houston, Tex.
20.
Vipulanandan, C., and Merbarkia, S. (1990). “Behavior of epoxy mortar.” Polym. Engrg. and Sci., 30(12), 734–740.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Mar 27, 1990
Published online: Feb 1, 1993
Published in print: Feb 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.