Explicit Finite-Element Analysis of 2024-T3/T351 Aluminum Material under Impact Loading for Airplane Engine Containment and Fragment Shielding
Publication: Journal of Aerospace Engineering
Volume 22, Issue 3
Abstract
Uncontained aircraft engine failure can cause catastrophic damaging effects to aircraft systems if not addressed in the aircraft design. Mitigating the damaging effects of uncontained engine failure and improving the numerical modeling capability of these uncontained engine events are crucial. In this paper, high strain rate material behavior of one of the most extensively used materials in the aircraft industry is simulated and the results are compared against ballistic impact tests. Ballistic limits are evaluated by utilizing explicit finite-element (FE) simulations based on the corresponding ballistic impact experiments performed at different material thicknesses. LS-DYNA is used as a nonlinear explicit dynamics FE code for the simulations. A Johnson–Cook material model with different sets of parameters is employed as a thermo-viscoplastic material model coupled with a nonlinear equation of state and an accumulated damage evaluation algorithm for the numerical simulations. Predictive performance of the numerical models is discussed in terms of material characterization efforts, material model parameters, mesh sensitivities, and effects of stress triaxiality. It is shown that mesh refinement does not necessarily provide better results for ballistic limit simulations without considering and calibrating these interrelated factors. Moreover, it is shown that current models that can only fit a specific function for damage evaluation as a function of stress triaxiality are not always successful in predicting failure, especially if the state of stress changes significantly.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers would like to acknowledge Mr. William Emmerling, Mr. Donald Altobelli, and Dr. Chip Queitzsch of the Federal Aviation Administration (FAA) for their technical and financial support.
References
Gogolowski, R. P., and Morgan, B. R. (2002). “Ballistic experiments with titanium and aluminum targets.” FAA Rep. No. DOT/FAA/AR-01/21, Federal Aviation Administration, Washington, D.C.
Hallquist, J. O. (2003). LS-DYNA keyword user’s manuel, Livermore Software Technology Corporation, Livermore, Calif.
Johnson, G. R., and Cook, W. H. (1983). “A constitutive model and data for metals subject to large strains, high strain rates and high temperatures.” Proc. 7th Int. Symp. on Ballistics, The Hague, The Netherlands, 541–547.
Kay, G. (2003). “Failure modeling of titanium 6Al-4V and aluminum 2024-T3 with the Johnson–Cook material model.” FAA Rep. No. DOT/FAA/AR-03/57, Federal Aviation Administration, Washington, D.C.
Kay, G., Goto, D., and Couch, R. (2007). “Statistical testing of aluminum, titanium, lexan and composites for transport airplane rotor burst fragment shielding.” FAA Rep. No. DOT/FAA/AR-07/26, Federal Aviation Administration, Washington, D.C.
Kelly, S., and Johnson, G. (2006). “Statistical testing of aircraft materials for transport airplane rotor burst fragment shielding.” FAA Rep. No. DOT/FAA/AR-06/9, Federal Aviation Administration, Washington, D.C.
Lesuer, D. R. (2000). “Experimental investigations of material models for Ti-6A1-4V titanium and 2024-T3 aluminum.” FAA Rep. No. DOT/FAA/AR-00/25, Federal Aviation Administration, Washington, D.C.
Loikkanen, M. J., Buyuk, M., Kan, C. D., and Meng, N. (2005). “A computational and experimental analysis of ballistic impact to sheet metal aircraft structures.” Proc., 5th European LS-DYNA Users’ Conf., Livermore Software Technology Corp., Birmingham, U.K.
Zukas, J. A. (1990). High velocity impact dynamics, Wiley, New York.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Aug 8, 2008
Accepted: Jan 22, 2009
Published online: Jun 15, 2009
Published in print: Jul 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.