Computational Methodology for Modeling Fracture in Fiber-Reinforced Polymer Composites
Publication: Journal of Aerospace Engineering
Volume 22, Issue 3
Abstract
A framework is presented for analyzing the inelastic behavior and fracture of polymer matrix composites. Physics-based viscoplastic constitutive equations are used and supplemented with a matrix cracking model and an energy-based debonding model. The capabilities of the framework are illustrated by finite-element solutions of boundary-value problems under plane strain conditions using the unit-cell concept. In the application, focus is centered on the effect of manufacturing induced voids on local modes of fracture under both tension and compression.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers acknowledge partial support from NASA Glenn Research Center under Cooperative Agreement No. NASANNX07AV39A and a grant from the Supercomputing Center at Texas A&M University.
References
Aboudi, J., Pindera, M.-J., and Arnold, S. (1999). “Higher-order theory for functionally graded materials.” Composites, Part B, 30, 777–832.
Aboudi, J., Pindera, M.-J., and Arnold, S. M. (2003). “Higher-order theory for periodic multiphase materials with inelastic phases.” Int. J. Plast., 19, 805–847.
Allen, D. H., Jones, R. H., and Boyd, J. G. (1994). “Micromechanical analysis of a continuous fiber metal matrix composite including the effects of matrix viscoplasticity and evolving damage.” J. Mech. Phys. Solids, 42, 505–529.
Arruda, E. M., and Boyce, M. C. (1993a). “Evolution of plastic anisotropy in amorphous polymers during finite straining.” Int. J. Plast., 9, 697–720.
Arruda, E. M., and Boyce, M. C. (1993b). “A three-dimensional constitutive model for large stretch behaviour of rubber materials.” J. Mech. Phys. Solids, 41, 389–412.
Arruda, E. M., Boyce, M. C., and Jayachandran, R. (1995). “Effects of strain rate, temperature and thermomechanical coupling on the finite strain deformation of glassy polymers.” Mech. Mater., 19, 193–212.
Asp, L. E., Berglund, L. A., and Talreja, R. (1996a). “A criterion for crack initiation in glassy polymers subjected to a composite-like stress state.” Compos. Sci. Technol., 56, 1291–1301.
Asp, L. E., Berglund, L. A., and Talreja, R. (1996b). “Prediction of matrix-initiated transverse failure in polymer composites.” Compos. Sci. Technol., 56, 1089–1097.
Benzerga, A. A. (2002). “Micromechanics of coalescence in ductile fracture.” J. Mech. Phys. Solids, 50, 1331–1362.
Benzerga, A. A., Besson, J., and Pineau, A. (2004). “Anisotropic ductile fracture. Part II: Theory.” Acta Mater., 52, 4639–4650.
Boyce, M. C., Parks, D. M., and Argon, A. S. (1988). “Large inelastic deformation of glassy polymers. Part I: Rate dependent constitutive model.” Mech. Mater., 7, 15–33.
Chowdhury, K. A. (2007). “Damage initiation, progression and failure of polymer based composites due to manufacturing induced defects.” Ph.D. thesis, Texas A&M Univ., College Station, Tex.
Chowdhury, K. A., Benzerga, A. A., and Talreja, R. (2008a). “An analysis of impact-induced deformation and fracture modes in amorphous glassy polymers.” Eng. Fract. Mech., 75, 3328–3342.
Chowdhury, K. A., Benzerga, A. A., and Talreja, R. (2008b). “A computational framework for analyzing the dynamic response of glassy polymers.” Comput. Methods Appl. Mech. Eng., 197, 4485–4502.
Chowdhury, K. A., Talreja, R., and Benzerga, A. A. (2008c). “Effects of manufacturing-induced voids on local failure in polymer-based composites.” J. Eng. Mater. Technol., 130, 021010.
Christman, T., Needleman, A., and Suresh, S. (1989). “An experimental and numerical study of deformation in metal-ceramic composites.” Acta Metall., 11, 3029–3050.
Gearing, B. P., and Anand, L. (2004). “On modeling the deformation and fracture response of glassy polymers due to shear yielding and crazing.” Int. J. Solids Struct., 41, 3125–3150.
Ghosh, S., Ling, Y., Majumbar, B., and Kim, R. (2000). “Interfacial debonding analysis in multiple fiber reinforced composites.” Mech. Mater., 32, 561–591.
Ghosh, S., and Moorthy, S. (1995). “Elastic-plastic analysis of arbitrary heterogeneous materials with the voronoi-cell finite-element method.” Comput. Methods Appl. Mech. Eng., 121, 373–409.
Gonzalez, C., and Llorca, J. (2007). “Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: Microsocopic mechanisms and modeling.” Compos. Sci. Technol., 67, 2795–2806.
Hamidi, K. Y., Aktas, L., and Altan, M. C. (2005). “Three-dimensional features of void morphology in resin transfer molded composites.” Compos. Sci. Technol., 65, 1306–1320.
Hu, C., Bai, J., and Ghosh, S. (2007). “Micromechanical and macroscopic models of ductile fracture in particle reinforced metallic materials.” Modell. Simul. Mater. Sci. Eng., 15, S377–S392.
Littell, J. D., Ruggeri, C. R., Goldberg, R. G., Roberts, G. R., Arnold, W. A., and Binienda, W. K. (2008). “Measurement of epoxy resin tension, compression, and shear stress strain curves over a wide range of strain rates using small test specimens.” J. Aerosp. Eng., 21(3), 162–173.
Llorca, J., Needleman, A., and Suresh, S. (1991). “An analysis of the effects of matrix void growth on deformation and ductility in metal ceramic composites.” Acta Metall. Mater., 39, 2317–2335.
Michel, J.-C., Moulinec, H., and Suquet, P. (1999). “Effective properties of composite materials with periodic microstructure: A computational approach.” Comput. Methods Appl. Mech. Eng., 172, 109–143.
Paley, M., and Aboudi, J. (1992). “Micromechanical analysis of composites by the generalized cells model.” Mech. Mater., 14, 127–139.
Peirce, D., Shih, C. F., and Needleman, A. (1984). “A tangent modulus method for rate dependent solids.” Comput. Struct., 18, 875–887.
Sternstein, S. S., and Myers, F. A. (1973). “Yielding of glassy polymers in the second quadrant of principal stress space.” J. Macromol. Sci., Phys., B8, 539–571.
Tvergaard, V., and Needleman, A. (2008). “An analysis of thickness effects in the izod test.” Int. J. Solids Struct., 45, 3951–3966.
Van den Heuvel, P. W. J., Peijs, T., and Young, R. J. (1998). “Failure phenomena in two-dimensional multi-fibre model composites. 5: A finite element study.” Composites, Part A, 29A, 1121–1135.
Wu, P. D., and Van der Giessen, E. (1993). “On improved network models for rubber elasticity and their applications to orientation hardening in glassy polymers.” J. Mech. Phys. Solids, 41, 427–456.
Wu, P. D., and Van der Giessen, E. (1996). “Computational aspects of localized deformations in amorphous glassy polymers.” Eur. J. Mech. A/Solids, 15, 799–823.
Zhu, L., Chattopadhyay, A., and Goldberg, R. K. (2008). “Failure model for rate-dependent polymer matrix composite laminates under high-velocity impact.” J. Aerosp. Eng., 21(3), 132–139.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Oct 30, 2008
Accepted: Jan 22, 2009
Published online: Jun 15, 2009
Published in print: Jul 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.