Case Study: Planar Kinematics of Dragline for Efficient Machine Control
Publication: Journal of Aerospace Engineering
Volume 22, Issue 2
Abstract
Overburden excavation is an integral component of the surface mine production chain. In large mines, the walking dragline is a dominant strip mining machine. Dragline performance depends on the operating speed, the bucket payload, and the machine availability, which could be negatively impacted by the actions taken to increase the machine productivity. In this study, the writers develop the kinematics and dynamic modeling of a dragline front-end assembly using the vector loop and simultaneous constraint methods. Based on the results of the kinematics and dynamic simulations, stress modeling and analysis are performed. Detailed analysis of the simulation results show that the angular accelerations of the drag and hoist ropes are close to zero, which indicate very smooth simulated operations. The respective maximum drag and hoist forces are 100 and , which also indicate a dominant drag operation. The maximum stress loading of the boom’s Arm-1 and Arm-2 are less than the boom yield stress at . These results indicate machine health and longevity within the simulated conditions.
Get full access to this article
View all available purchase options and get full access to this article.
References
Awuah-Offei, K., Frimpong, S., and Askari-Nasab, H. (2005). “Dynamic simulation of cable shovel specific energy in oil sands excavation.” Proc., Computer Applications in the Minerals Industry (CAMI 2005), Balkema, Rotterdam, The Netherlands, 33–45.
Bernold, L. E. (1991). “Experimental studies on mechanics of lunar excavation.” J. Aerosp. Eng., 4(1), 9–22.
Bullock, D. M., Apte, S., and Oppenhim, I. J. (1990). “Force and geometry constraints in robot excavation.” Proc., Space 90: Engineering Construction. and Operations in Space, New York, 960–969.
Dayawansa, P., Chitty, G., Kerezsi, B., Bartosiewicz, H., and Price, J. W. H. (2004). “Fracture mechanics of mining dragline booms.” Proc., Int. Conf. on Structural Integrity and Fracture (SIF 2004), Australian Fracture Group Inc., Brisbane, Australia, 85–95.
Dormand, J. R., and Prince, P. J. (1980). “A family of embedded Runge–Kutta formulae.” J. Comput. Appl. Math., 6(1), 19–26.
Frimpong, S., and Chang, Z. (2004). “KANEXP03 cable shovel dynamics and PID control scheme for efficient surface mining excavation.” SME mining engineering, SME, Littleton, Colo., in press.
Frimpong, S., and Hu, Y. (2003). “Hydraulic shovel simulator in surface mining excavation engineering.” Proc., 12th Int. Symp. on Mine Planning and Equipment Selection (MPES 2004), WMC, Melbourne, West Australia.
Gardner, J. F. (2001). Simulation of machines using MATLAB and SIMULINK, Wadsworth Group, Pacific Grove, Calif.
Gilewicz, P. (2000). “International dragline population matures.” Coal Age, 105(6), 30–32.
Golosinski, T. S. (1994). “Performance of dragline hoist and drag ropes.” Min. Eng., 46(11), 1285–1288.
Haneman, D. K., Hayes, H., and Lumley, G. I. (1992). “Dragline performance evaluations for tarong coal using physical modelling.” Proc., 3rd Large Open Pit Mining Conf., The Australian Institute of Mining and Metallurgy, Mackay, Australia, 93–99.
Hansen, M. R. (1993). “An automated procedure for dimensional synthesis of mechanisms.” Struct. Optim., 5(4), 145–151.
Hemami, A., and Daneshmend, L. (1992). “Force analysis for automation of the loading operation in a LHD-loader.” Proc., 1992 IEEE Int. Conf. on Robotics and Automation, IEEE, Piscataway, N.J., 645–650.
Khoshzaban, M., Sassani, F., and Lawrence, P. D. (1992). “Autonomous kinematic calibration of industrial hydraulic manipulators.” Proc., 4th Int. Symp. on Robotics and Manufacturing, The American Society of Mechanical Engineers, Santa Fe, N.M., 577–584.
Koivo, A. J. (1994). “Kinematics of excavators (backhoes) for transferring surface material.” J. Aerosp. Eng., 7(1), 17–32.
Lawrence, P. D., Sassani, F., Sauder, B., Sepehri, N., Wallersteiner, U., and Wilson, J. (1993). “Computer-assisted control of excavator-based machines.” Proc., SAE Off Highway Exposition, Milwaukee, SAE Technical Paper No. 932486.
MathWorks Inc. (2004a). MATLAB 7.0 user’s guide, The Language of Technical Computing, Natick, Mass.
MathWorks Inc. (2004b). Simulink user’s guide, The Language of Technical Computing, Natick, Mass.
MSC. ADAMS. (2004). MSC. ADAMS, MSC. Software Corporation, Santa Ana, Calif.
Papadulos, E., and Sarkar, S. (1996). “On the dynamic modeling of an articulated electrohydraulic forestry machine.” Proc., AIAA Forum on Advanced Developments in Space Robotics, Madison, Wis.
Seward, D., and Bradly, D. (1988). “The development of research models for automatic Excavation.” Proc., 5th Int. Symp. on Automation and Robotics in Construction, International Association for Automation and Robotics in Construction and Maintenance.
Shi, N., and Joseph, T. G. (2004). “A new Canadian shovel dipper design for improved performance.” Proc., CIM Conf., Edmonton, Alta., Canada, 1–7.
Townson, P. G., Murthy, D. N. P., and Gurgenci, H. (2003). “Optimization of dragline load.” Case studies in reliability and maintenance, W. R. Blischke and D. N. Prabhakar Murthy, eds., Wiley Series in Probability and Statistics, Wiley, New York, 517–544.
Westcott, P. (2004). “Dragline and/or truck/shovel assist: Some technical and business considerations.” Inaugural UNSW/Mitsubishi Lecture Notes, ⟨http://www.mining.unsw.edu.au/pdf/MitsubishiLect_Notes_2004.pdf⟩ (Nov. 21, 2006).
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Dec 21, 2005
Accepted: Dec 10, 2007
Published online: Apr 1, 2009
Published in print: Apr 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.