Capacitive Micromachined Ultrasonic Transducers: Theory and Technology
Publication: Journal of Aerospace Engineering
Volume 16, Issue 2
Abstract
Capacitive micromachined ultrasonic transducers (CMUTs), introduced about a decade ago, have been shown to be a good alternative to conventional piezoelectric transducers in various aspects, such as sensitivity, transduction efficiency, and bandwidth. In this paper, we discuss the principles of capacitive transducer operation that underlie these aspects. Many of the key features of capacitive ultrasonic transducers are enabled with micromachining technology. Micromachining allows us to miniaturize device dimensions and produce capacitive transducers that perform comparably to their piezoelectric counterparts. The fabrication process is described briefly, and the performance of the CMUT transducers is evaluated by demonstrating characterization results. It is shown that the transduction efficiency as defined by the electromechanical coupling coefficient can be close to unity with proper device design and operating voltage. It is also shown that CMUTs provide large bandwidth (123% fractional bandwidth) in immersion applications which translate into high temporal and axial resolution. Finally, the feasibility of using CMUTs is demonstrated by showing imaging examples in air and in immersion.
Get full access to this article
View all available purchase options and get full access to this article.
References
Bayram, B., Yaralioglu, G. G., and Khuri-Yakub, B. T. (2001). “Influence of the electrode size and location on the performance of a CMUT.” 2001 IEEE Int. Ultrasonics Symposium, Atlanta, October 7–10.
Belincourt, D. (1971). “Piezoelectric crystals and ceramics.” Ultrasonic transducer materials, O.E. Mattiat, ed., Plenum, New York.
Cheng, C. H., Ergun, A. S., and Khuri-Yakub, B. T. (2002). “Electrical through wafer interconnects with 0.05 pico farads parasitic capacitance on 400 μm thick silicon substrate.” Solid State Sensor, Actuator and Microsystems Workshop, Hilton Head Island, S.C., June 2–6, 157–160.
Fraser, J., and Reynolds, P. (2000). “Finite-element method for determination of electromechanical coupling coefficient for piezoelectric and capacitive micromachined ultrasonic transducers.” Joint 140th Meeting of the Acoustical Society of America/Noise Contro, Newport Beach, Calif., December 3–8.
Haller, M. I., and Khuri-Yakub, B. T.(1996). “A surface micromachined electrostatic ultrasonic air transducer.” IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 43(1), 1–6.
Hunt, F. V. (1982). Electroacoustics; the analysis of transduction, and its historical background, 2nd Ed., Harvard University Press, Cambridge, Mass.
Jin, X. C., Ladabaum, I., Degertekin, L., Calmes, S., and Khuri-Yakub, B. T.(1999). “Fabrication and characterization of surface micromachined capacitive ultrasonic transducers.” J. Microelectromech. Syst., 8(1), 100–114.
Kuhl, W., Schodder, G. R., and Schroder, F. K.(1954). “Condenser transmitters and microphones with solid dielectric for airborne ultrasonics.” Acustica, 4(5), 520.
Ladabaum, I., Jin, Xuecheng, Soh, H. T., Atalar, A., and Khuri-Yakub, B. T.(1998). “Surface micromachined capacitive ultrasonic transducers.” IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 45(3), 678–690.
Mason, W. P. (1948). Electromechanical transducers and wave filters, Van Nostrand, London.
Mastrangelo, C. H., and Hsu, C. H. (1993a). “Mechanical stability and adhesion of microstructures under capillary forces. I: Basic theory.”J. Microelectromech. Syst., 2(1), 33–43.
Mastrangelo, C. H., and Hsu, C. H.(1993b). “Mechanical stability and adhesion of microstructures under capillary forces. II: Experiments.”J. Microelectromech. Syst., 2(1), 44–55.
Oralkan, O., Ergun, A. S., Johnson, J. A., Karaman, M., Demirci, U., Kaviani, K., Lee, T. H., and Khuri-Yakub, B. T.(2002). “Capacitive micromachined ultrasonic transducers: Next generation arrays for acoustic imaging?” IEEE Trans. Ultrason., Ferroelect., Freq. Control, 49(11), 1596–1610.
Soh, H. T., Ladabaum, I., Atalar, A., Quate, C. F., and Khuri-Yakub, B. T.(1996). “Silicon micromachined ultrasonic immersion transducers.” Appl. Phys. Lett., 69(24), 3674–3676.
Information & Authors
Information
Published In
Journal of Aerospace Engineering
Volume 16 • Issue 2 • April 2003
Pages: 76 - 84
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Nov 6, 2002
Accepted: Nov 6, 2002
Published online: Mar 14, 2003
Published in print: Apr 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.