Active Control of Tensegrity Systems
Publication: Journal of Aerospace Engineering
Volume 11, Issue 2
Abstract
Tensegrity systems have been known for almost half a century. Their mechanical and geometrical characteristics make them suitable to terrestrial and extraterrestrial applications. This paper describes a numerical scheme of active control of tensegrity systems in extraterrestrial applications. An algorithm based on instantaneous optimal control has been developed and applied to an assembly of elementary tensegrity cells. The whole structural system comprises four cells forming a linear structure with 27 cables and 12 struts. Active control is realized in the first simulation by means of three actuators and in the second by means of six actuators located on two of the four cells. The results show that vibration amplitudes of nodes are reduced by such an active control scheme.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abdel-Rohman, M., and Leipholz, H. (1978). “Active control of flexible structures dynamic analysis. J. Struct. Div., ASCE, 104(8), 1251–1266.
2.
Abdel-Rohman, M., and Leipholz, H.(1982). “Active control of large structures.”J. Engrg. Mech. Div., ASCE, 108(5), 719–731.
3.
Abdel-Rohman, M., and Leipholz, H.(1983). “Active control of tall buildings.”J. Struct. Engrg., ASCE, 109(3), 628–645.
4.
Bathe, K. J. (1982). Finite element procedures. Prentice Hall, Englewood Cliffs, N.J.
5.
Bathe, K. J., Ramm, E., and Wilson, E.(1975). “Finite element formulations for large deformation dynamic analysis.”Int. J. Numerical Methods in Engrg., 9, 353–386.
6.
Bouderbala, M., and Motro, R. (1997). “Folding tensegrity systems.”Proc., Int. Colloq., J. C. Chilton, B. S. Chao, W. J. Lewis, and O. Popovic, eds., Univ. of Nottingham, U.K., 115–122.
7.
Cha, J. Z., Pitarresi, J. M., and Soong, T. T.(1988). “Optimal design procedures for active structures.”J. Engrg. Mech., ASCE, 114(12), 2710–2723.
8.
Chang, C. C., and Yang, H. T. Y.(1992). “Instantaneous optimal control of building frames.”J. Engrg. Mech., ASCE, 120(4), 1307–1325.
9.
Chung, L. L., Lin, R. C., and Soong, T. T.(1989). “Experimental study of active control for MDOF seismic structures.”J. Engrg. Mech., ASCE, 115(8), 1609–1627.
10.
Emmerich, D. G. (1964). “Construction de réseaux autotendants.”Brevet délivré par le ministère de l'industrie sous le No. 1,377,290, September 28 (in French).
11.
Fuller, R. B. (1962). “Tensile integrity structures.”U.S. Patent No. 3,063,521.
12.
Kebiche, K., Kazi Aoual, N., and Motro, R. (1997). “Systèmes de tenségrité: Etude du comportement en grands déplacements.”3ème Congrès de Mécanique. Faculté des sciences de Tétouan, Société Marocaine des Sciences Mécaniques (in French).
13.
Lalvani, H. (guest ed.). (1996). International Journal of Space Structures. Special Issue: Morphology, 11(1 & 2).
14.
Motro, R. (1998). “Tensegrity systems.”Proc., Colloq. on the Present and Future of the Technologies of Shells and Spatial Structures. IASS, Madrid, Spain.
15.
Reinhorn, A. M., Manolis, G. D., and Wen, C. Y.(1987). “Active control of inelastique structures.”J. Engrg. Mech., ASCE, 113(4), 315–333.
16.
Rofooei, F. R., and Tadjbakhsh, I. G.(1993). “Optimal control of structures with acceleration, velocity, and displacement feedback.”J. Engrg. Mech., ASCE, 119(10), 1993–2010.
17.
Snelson, K. (1965). “Continuous tension, discontinuous compression structures.”U.S. Patent No. 3,169,611.
18.
Soong, T. T. (1988). “Active structural control in civil engineering.”Engrg. Struct., ASCE, Reston, Va.
19.
Vassart, N. (1997). “Recherche de forme et étude de la stabilité des systèmes réticulés spatiaux autocontraints; application aux systèmes de tenségrite,” Thèse de doctorat, Université de Monpellier, France.
20.
Yang, J. N., Akbarpour, A., and Askar, G.(1990). “Effect of time delay on control of seismic-excited buildings.”J. Struct. Engrg., ASCE, 116(10), 2801–2814.
21.
Yang, J. N., Akbarpour, A., and Ghaemmaghami, P.(1987). “New optimal control algorithms for structural control.”J. Engrg. Mech., ASCE, 113(9), 1369–1386.
22.
Yang, J. N., Danielians, A., and Liu, S. C.(1991). “Aseismic hybrid control systems for building structures.”J. Engrg. Mech., ASCE, 117(4), 836–853.
23.
Yang, J. N., Li, Z., and Liu, S. C.(1992). “Stable controllers for instantaneous optimal control.”J. Engrg. Mech., ASCE, 118(8), 1612–1630.
24.
Yang, J. N., Li, Z., Liu, S. C., and Yang, J. N.(1987). “Control of hysteretic system using velocity and acceleration feedbacks.”J. Engrg. Mech., ASCE, 118(11), 2227–2245.
25.
Yao, J. T. P.(1972). “Concept of structural control.”J. Struct. Div., ASCE, 98(7), 1569–1570.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Apr 1, 1998
Published in print: Apr 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.