Selection and Use of Polymer-Based Materials in the Repair of Concrete Structures
Publication: Journal of Performance of Constructed Facilities
Volume 19, Issue 3
Abstract
A large number of specialty repair concrete products are currently marketed and new products are being continually introduced leaving clients, engineers, and designers bewildered. The paucity of information on the mechanical and thermal properties of a given product complicates material selection. These difficulties force designers to adopt materials that have properties close to those of the original concrete. In so doing they often reject advantages offered by polymer-based products now on the market. The challenge is to understand the properties of each material and select the appropriate one. To assure predictable performance, the designer must have a good knowledge and understanding of the properties of the repair material, how it will interact with the environment in service, and a clear description of maintenance procedures and intervals. Typical properties of currently used polymeric materials in relation to the important aspect of selection based on compatibility with in-service conditions and suitability with the application procedures of the job are discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alfred, R., Alfred, H., and Gustave, P. (1984). “Experiences on barrier layer on the surface of concrete.” Proc., RILEM Seminar on Durability of Concrete Structures under Normal Outdoor Exposure, Hanover, Germany, 116–125.
American Concrete Institute (ACI). (1968). “Epoxies with concrete.” ACI Publication S.P. 21, ACI, Detroit, 5–8,
29–36,
and 93–106.
Cusson, D., and Mailvaganam, N. P. (1996). “Durability of repair materials.” Concr. Int., 26(9), 35–38.
Hewlet, P. C., and Hurley, S. A. (1984). “The consequences of polymer-concrete mismatch.” Proc., The Design Life of Buildings, Joint Institute of Civil Engineers/Concrete Society/RIBA Symp. Thomas Telford, London, 26–27,
and 179–196.
Hewlet, P. C. (1993). “Assessment & evaluation of polymer-based repair materials.” Concr. Int., 22(3), 35–38,
and 39–41.
Kuhlmann, I., and Walters, G., eds. (1993). “Polymer modified hydraulic—Cement mixtures.” STP 1176, ASTM, Baltimore, 7–18,
and 35–43.
Mailvaganam, N. P., ed. (1992). “Repair and protection of concrete structures.” The science of concrete and polymeric building materials, Chap. 1, CRC, Boca Raton, Fla., 31–42.
Mailvaganam, N. P., and Alexander, A. (1996). “Selection of repair materials using expert advice.” Concrete Repair Bulletin, 12(3), 12–15.
Ohama, Y. (1996). “Polymer-based materials for repair and improved durability: Japanese experience.” Constr. Build. Mater., 10(1), 77–82.
Plum, D. (1991). “Materials-what to specify?” J. Constr., Maintenance Repair, 6(2), 3–7.
Revie, R. W. ed. (2000). “Corrosion of steel in concrete.” Uhlig’s corrosion handbook, 2nd ed., Interscience, New York, 581–600.
Sasse, H. R., ed. (1986). “Adhesion between polymers and concrete.” Proc., RILEM International Symp., Paris, 144–151,
and 230–244.
Schupack, M. (1980). “Divorces and ruptured relations between epoxies and concrete.” Concr. Constr., 735–738.
Warner, J. (1984). “Selection of repair materials.” Concr. Constr., 72–74.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Jul 14, 2003
Accepted: May 11, 2004
Published online: Aug 1, 2005
Published in print: Aug 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.