Field and Laboratory Determination of Granular Subgrade Moduli
Publication: Journal of Performance of Constructed Facilities
Volume 16, Issue 4
Abstract
This paper presents a comparison study of the experimental results from the falling weight deflectometer (FWD) test, field rigid plate bearing load test, and laboratory resilient modulus test on granular subgrade materials in flexible pavements. The results showed that the average laboratory resilient moduli at optimum compacted conditions were 1.1 times higher than the average laboratory determined resilient moduli at in situ conditions. The FWD back-calculated moduli were about 1.6 times higher than the laboratory resilient moduli for the granular materials. The average laboratory determined maximum dry density was slightly higher than the average field measured in situ dry density. A hyperbolic model was proposed to represent the relationship of the load-deformation curve obtained from the field plate bearing load test. No significant relationship was found between the laboratory resilient modulus and the modulus of elasticity from the field plate bearing tests.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Association of State Highway and Transportation Officials (AASHTO). (1986). Guide for design of pavement structures, Vol. I, Joint Task Force on Pavements, Highway Subcommittee on Design, Washington, D.C.
American Association of Sate Highway and Transportation Officials (AASHTO). (1991). “Interim method of test for resilient modulus of subgrade soils and untreated base/subbase materials.” T 292-91I, Washington, D.C.
American Association of State Highway and Transportation Officials (AASHTO). (1993). Guide for design of pavement structures, Vol. II, Joint Task Force on Pavements, Highway Subcommittee on Design, Washington, D.C.
The Asphalt Institute. (1982). “Research and development of the Asphalt Institute’s Thickness design manual (MS-1) ninth edition.” Research Rep. No. 82-2, College Park, Md.
Burmister, D. M. (1943). “The theory of stresses and displacements in layered systems and application to the design of airport runways.” Proc., Highway Research Board, Vol. 23, National Research Council, Washington, D.C., 125–148.
Burmister, D. M. (1945). “The general theory of stresses and displacements in layered systems.” J. Appl. Phys., (Feb.).
Burmister, D. M. (1947). “Discussion.” Special Technical Publication 79, ASTM, Philadelphia.
Daleiden, J. F., Killingsworth, B. M., Simpson, A. L., and Zamora, R. A. (1994). “Analysis of procedures for establishing in situ subgrade moduli.” Transportation Research Record 1462, Transportation Research Board, Washington, D.C., 102–107.
Duncan, J. M., and Chang, C. Y.(1970). “Non-linear analysis of stress and strain in soils.” J. Soil Mech. Found. Div., 96(5), 1629–1653.
Manual of Florida sampling and testing methods. (1988). Florida Department of Transportation, Tallahassee, Fla.
McLeod, N. W. (1947). “Runway evaluation in Canada.” Highway Research Board Rep. 4-B, Washington, D.C.
McLeod, N. W. (1953). “Some basic problems in flexible pavement design.” Proc., Highway Research Board, Washington, D.C.
Seed, H. B., Mitry, F. G., Monismith, C. L., and Chan, C. K. (1967). “Prediction of flexible pavement deflections from laboratory repeated-load tests.” National Cooperative Highway Research Program Rep. (NCHRP) 35, Highway Research Board, National Research Council, Washington, D.C.
Tutumluer, E., and Thompson, M. (1997). “Anisotropic modeling of granular bases in flexible pavements.” Transportation Research Record 1577, Transportation Research Board, Washington, D.C., 18–26.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Sep 17, 2001
Accepted: May 1, 2002
Published online: Oct 15, 2002
Published in print: Nov 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.