Probabilistic Models of Damaging Deflections for Floor Elements
Publication: Journal of Performance of Constructed Facilities
Volume 15, Issue 4
Abstract
In this paper a number of serviceability issues related mainly to excessive deflections of structural floor elements (beams and slabs) are discussed. Field data of serviceability damage caused by excessive deflections of structural floor elements have been collected from various sources and probabilistic models are developed. Current serviceability specifications for allowable deflection limits in Australian, U.S., and other concrete structure codes have been compared against these probabilistic distributions of damaging deflections. Preliminary results confirm that allowable deflection limits in these design codes represent realistic lower-bound values of damaging deflections.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Concrete Institute (ACI) Committee 435. ( 1985). “Observed deflections of reinforced concrete slab systems, and causes of large deflections.” Deflection of concrete structures, ACI SP-86, Detroit, 15–61.
2.
American Concrete Institute (ACI) Committee 318. ( 1999). “Building code requirements for reinforced concrete.” ACI 318-99, ACI Manual of Concrete Practice, Detroit.
3.
ASCE Ad Hoc Committee on Serviceability Research. (1986). “Structural serviceability: A critical appraisal and research needs.”J. Struct. Engrg., ASCE, 112(12), 2646–2664.
4.
British Standards Institution (BSI). ( 1985). “Structural use of concrete.” BS 8110: Parts 1 and 2, London.
5.
Canadian Standards Association (CSA). ( 1984). “Design of concrete structures for buildings.” CSA-CAN3-A23.3-M84, Rexdale, Ont., Canada.
6.
Cooney, R. C., and King, A. B. ( 1998). “Serviceability criteria for buildings.” BRANZ Study Rep.: Rep. SR14, Building Research Association of New Zealand, Judgeford, New Zealand.
7.
ENV 1992-1-1, Eurocode 2: General Rules and Rules for Buildings.
8.
Ellingwood, B., MacGregor, J. G., Galambos, T. V., and Cornell, C. A. (1982). “Probability-based load criteria: Load factors and load combinations.”J. Struct. Div., ASCE, 108(5), 978–997.
9.
Galambos, T. V., and Ellingwood, B. (1986). “Serviceability limit states: Deflection.”J. Struct. Engrg., ASCE, 112(1), 67–84.
10.
Galambos, T. V., Ellingwood, B., MacGregor, J. G., and Cornell, C. A. (1982). “Probability-based load criteria: Assessment of current design practice.”J. Struct. Div., ASCE, 108(5), 959–977.
11.
Holicky, M. ( 1988). “Serviceability problem of departmental store—Case study.” Proc., Symp./Workshop on Serviceability of Build. (Movements, Deformations, Vibrations), National Research Council of Canada, Ottawa, 166–178.
12.
Holicky, M., and Ostlund, L. ( 1993). “Probabilistic design concept.” Struct. Serviceability of Build., IABSE Rep., Rep. No. 69, 91–98.
13.
Hossain, N. B. ( 2000). “Time-dependent deflections, serviceability reliability and expected costs of unserviceability for reinforced concrete flexural beams.” PhD thesis, Dept. of Civ., Surv. and Envir. Engrg., University of Newcastle, NSW, Australia.
14.
Jokinen, E. P., Scanlon, A., and Burghardt, G. J. ( 1988). “Comparison of field measured floor slab deflections for two reinforced concrete buildings.” Proc., Symp./Workshop on Serviceability of Build. (Movements, Deformations, Vibrations), 112–123.
15.
Knoll, F. ( 1988). “A practical view on deflections and cracks.” Proc., Symp./Workshop on Serviceability of Build. (Movements, Deformations, Vibrations), National Research Council of Canada, Ottawa, 91–100.
16.
Leicester, R. H. ( 1993). “Serviceability criteria for building codes.” Struct. Serviceability of Build., IABSE Rep., Rep. No. 69, 69–83.
17.
Leicester, R. H., and Beresford, F. D. ( 1977). “A probability model for serviceability specifications.” Proc., 6th Australian Conf. on the Mech. of Struct. and Mat., 407–413.
18.
Leicester, R. H., and Pham, L. P. ( 1987). “Serviceability limits.” Proc., 1st Nat. Struct. Engrg. Conf., Vol. 2, 530–534.
19.
Li, C. Q., and Melchers, R. E. (1992). “Reliability analysis of creep and shrinkage effects.”J. Struct. Engrg., ASCE, 118(9), 2323–2337.
20.
Loss, J., and Kennett, E. ( 1987). “ Identification of performance failures in large structures and buildings.” NSF Proj. No. ECE 8608145, School of Arch. and Arch. and Engrg. Perf. Information Ctr., University of Maryland, College Park, Md.
21.
Mayer, H., and Rusch, H. ( 1967). “Building damage caused by deflection of reinforced concrete building components.” Tech. Translation 1412, National Research Council of Canada, Ottawa.
22.
Montgomery, C. J., Brockhank, R. G., Stephens, M. J., and Krywiak, G. ( 1988). “Design, construction and deflection of two-way slabs.” Proc., Symp./Workshop on Serviceability of Build. (Movements, Deformations, Vibrations), National Research Council of Canada, Ottawa, 101–111.
23.
Ofosu-Asamoah, K., and Gardner, N. J. ( 1997). “Flat slab thickness required to satisfy serviceability including early age construction loads.” ACI Struct. J., 94(6), 700–707.
24.
Philpot, T. A., Rosowsky, D. V., and Fridley, K. J. (1993). “Serviceability design in LRFD for wood.”J. Struct. Engrg., ASCE, 119(12), 3649–3667.
25.
Plewes, W. G. ( 1971). “Deflection—Is there a problem?” Proc., Symp. of Deflection of Struct. Concrete, Canadian Capital Chapter of the American Concrete Institute, 5–14.
26.
Rice, J. A. ( 1988). Mathematical statistics and data analysis, Wadsworth and Brooks/Cole Advanced Books and Software, Pacific Grove, Calif.
27.
Rosowsky, D. V., and Fridley, K. J. (1997). “Effect of discrete member size on reliability of wood beams.”J. Struct. Engrg., ASCE, 123(6), 831–835.
28.
Rosowsky, D. V., Stewart, M. G., and Khor, E. H. ( 2000). “Early-age loading and long-term deflections of reinforced concrete beams.” ACI Struct. J., 97(3), 517–524.
29.
Sopko, S. J. ( 1993). “Designing reinforced concrete beams for serviceability.” Int. Colloquium on Struct. Serviceability of Build., IABSE Rep., Rep. No. 69, 271–276.
30.
Standards Association of Australia (SAA). ( 1994). “Concrete structures.” AS 3600-1994, Sydney, Australia.
31.
Stewart, M. G. ( 1994). “Human error, quality assurance and structural performance.” Proc., 3rd Australasian Struct. Engrg. Conf., 1075–1080.
32.
Stewart, M. G. (1996). “Serviceability reliability analysis of reinforced concrete structures.”J. Struct. Engrg., ASCE, 122(7), 794–803.
33.
Stewart, M. G. ( 1998). “A risk-benefit model incorporating serviceability loss functions.” Proc., Int. Conf. on Struct. Safety and Reliability (ICOSSAR '97), N. Shiraisha, M. Shinozuka, and Y. K. Wen, eds., Vol. 1, Balkema, Rotterdam, The Netherlands, 287–294.
34.
Taylor, P. J., and Heiman, J. L. ( 1977). “Long-term deflection of reinforced concrete flat slabs and plates.” ACI J., 74(11), 556–561.
35.
Warner, R. F., Rangan, B. V., Hall, A. S., and Faulkes, K. A. ( 1998). Concrete structures, Addison-Wesley Longman Australia Pty Ltd., Australia.
Information & Authors
Information
Published In
History
Received: Jan 11, 2001
Published online: Nov 1, 2001
Published in print: Nov 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.