Application of Shakedown Theory in Characterizing Traditional and Recycled Pavement Base Materials
Publication: Journal of Transportation Engineering
Volume 136, Issue 3
Abstract
To facilitate the use of recycled materials in pavement construction, a mechanistic-based approach is required to better characterize pavement base materials. This paper demonstrates the application of the shakedown theory to characterize the behavior of traditional and recycled base materials based on laboratory repeated load triaxial (RLT) tests and full-scaled accelerated loading tests. A new approach that is based on dissipated energy is proposed to explain different shakedown responses of tested materials under repeated loading. The dissipated energy approach illustrated that there are two responses during RLT tests, namely, stable and unstable responses, which are dependent on the loading levels and type of tested material. It was also observed that the transition from the stable to unstable response represents gradual microstructural adjustments of tested materials to accommodate the applied loading. This gradual transition explains the difficulties in identifying some material responses within the shakedown theory based only on the permanent strain rate criteria. Based on the results of this study, a mechanistic-based design procedure to incorporate various recycled materials into pavement bases is recommended.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2003). “Standard method of test for determining the resilient modulus of soils and aggregates.” AASHTO T 307-99, Washington, D.C.
Anderson, I. A., and Collins, I. F. (1995). “Plan strain stress distributions in discrete and blended coated solids under normal and sliding contact.” Wear, 185, 23–33.
Arnold, G. K. (2004). “Rutting of granular pavements.” Ph.D. dissertation, School of Civil Engineering, The Univ. of Nottingham, U.K.
AUSTROADS. (2003a). “Development of performance-based specifications for unbound granular materials. Part A: Issues and recommendations.” AP-T29/03, Sydney, Australia.
AUSTROADS. (2003b). “Development of performance-based specifications for unbound granular materials. Part B: Use of RLT Test to predict performance.” AP-T30/03, Sydney, Australia.
Barksdale, R. D., and Alba, J. L. (1993). “Laboratory determination of resilient modulus for flexible pavement design.” Interim Rep. No. 2 for NCHRP, Transportation Research Board, National Research Council, Washington, D.C.
Boulbibane, M., and Weichert, D. (1997). “Application of shakedown theory to soils with nonassociated flow rules.” Mech. Res. Commun., 24(5), 513–519.
Brett, J. F. (1987). “Stability and shakedown in pavement roughness change with age.” Proc., New Zealand Road Symp., Vol. 4, National Roads Board, Wellington, New Zealand, 695–704.
García-Rojo, R. and Herrmann, H. J. (2005). “Shakedown of unbound granular material.” Granular Matter, 7(2–3), 109–118.
Green, R. (2001). “Energy-based evaluation and remediation of liquefiable soils.” Ph.D. dissertation, Virginia Polytechnic Institute and State Univ., Blacksburg, Va.
Hossain, M. Z., and H. S. Yu. (1996). “Shakedown analysis of multilayer pavements using finite element and linear programming.” Proc., 7th Australia-New Zealand Conf. on Geomechanics, 512–520.
Khogali, W. E., and Mohamed, E. H. H. (2004). “Novel approach for characterization of unbound materials.” Transp. Res. Rec., 1874, 38–46.
Mohammad, L., Herath, A., Rasoulian, M., and Zhang, Z. (2006). “Laboratory evaluation of untreated and treated pavement base materials from a repeated load permanent deformation test.” Proc., 85th Transportation Research Board Annual Meeting (CD-ROM), National Research Council, Washington, D.C.
National Cooperative Highway Research Program (NCHRP). (2004). “Guide for mechanistic-empirical design of new and rehabilitation pavement structures. Final report, part 2, design inputs.” Rep. No. NCHRP 1-37A, Transportation Research Board, Washington, D.C.
Puppala, A. J., Chomtid, S., and Bhadriraju, V. (2005). “Evaluation of plastic strain potentials in subgrade soils using repeated load triaxial tests.” Proc., 84th Transportation Research Board Annual Meeting (CD-ROM), National Research Council, Washington, D.C.
Raad, L., Weichert, D., and Haidar, A. (1989a). “Analysis of full-depth asphalt concrete pavements using shakedown theory.” Transp. Res. Rec., 1227, 53–65.
Raad, L., Weichert, D., and Haidar, A. (1989b). “Shakedown and fatigue of pavements with granular bases.” Transp. Res. Rec., 1227, 159–172.
Raad, L., Weichert, D., and Najm, W. (1988). “Stability of multilayer systems under repeated loads.” Transp. Res. Rec., 1207, 181–186.
Saeed, A., Hall, J., and Barker, W. (2001). “Performance-related tests of aggregates for use in unbound pavement layers.” NCHRP Rep. No. 453, National Academy Press, Washington, D.C.
Sharp, R. (1985). “Pavement design based on shakedown analysis.” Transp. Res. Rec., 1022, 99–107.
Sharp, R., and Booker, J. (1984). “Shakedown of pavements under moving surface loads.” J. Transp. Eng., 110(1), 1–14.
Tao, M., and Zhang, Z. (2005). “Enhanced performance of stabilized by-product gypsum.” J. Mater. Civ. Eng., 17(6), 617–623.
Tao, M., and Zhang, Z. (2007). “Evaluation of stabilized by-product gypsum at field testing sections.” J. Mater. Civ. Eng., 19(4), 329–339.
Werkmeister, S. (2003). “Permanent deformation behavior of unbound granular materials.” Ph.D. dissertation, Univ. of Technology, Dresden, Germany.
Werkmeister, S. (2006). “Shakedown analysis of unbound granular materials using accelerated pavement test results from New Zealand’s CAPTIF facility.” Geotechnical Special Publication No. 154, ASCE, Reston, Va., 220–228.
Werkmeister, S., Dawson, A., and Wellner, F. (2004). “Pavement design model for unbound granular materials.” J. Transp. Eng., 130(5), 665–674.
Werkmeister, S., Dawson, A. R., and Wellner, F. (2001). “Permanent deformation behavior and the shakedown theory.” Transp. Res. Rec., 1757, 75–81.
Werkmeister, S., Dawson, A. R., and Wellner, F. (2005). “Permanent deformation behavior of granular materials.” Road Mater. Pavement Des., 6(1), 31–51.
Wong, S. K., and Kapoor, A. (1996). “The effect of hard and stiff overlay coatings on the strength of surfaces in repeated sliding.” Tribol. Int., 29(8), 695–702.
Wong, S. K., Kapoor, A., and Williams, J. A. (1997). “Shakedown limits on coated and engineered surfaces.” Wear, 203–204, 162–170.
Wu, Z., Zhang, Z., King, B., and Mohammad, L. (2007). “Evaluating structural performance of base/subbase materials at the Louisiana accelerated pavement research facility.” Proc., 86th Transportation Research Board Annual Meeting (CD-ROM), National Research Council, Washington, D.C.
Yu, H. S., and Hossain, M. Z. (1998). “Lower bound shakedown analysis of layered pavements using discontinuous stress fields.” Comput. Methods Appl. Mech. Eng., 167, 209–222.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Sep 14, 2007
Accepted: Oct 20, 2009
Published online: Feb 12, 2010
Published in print: Mar 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.