Three-Dimensional Dynamic Analysis of Flexible Conventional Pavement Foundation
Publication: Journal of Transportation Engineering
Volume 131, Issue 6
Abstract
The paper examines the dynamic response of flexible conventional pavement systems to single wheel traffic loads in terms of the pavement design criteria, namely the fatigue strain at the bottom of the asphalt concrete layer and rutting strain at the top of the subgrade material. Model setup including geometry, boundary conditions, and load wave characterization are presented. The effect of elastoplasticity of the base material and elastoplasticity with strain hardening of the subgrade material on the dynamic response of the pavement system are first investigated. A detailed model parametric study then follows to show the effect of the base strength and thickness and the subgrade quality on the fatigue and rutting strains and the vertical surface deflection. The study, conducted with program ADINA, employs a three-dimensional, implicit dynamic, finite element method.
Get full access to this article
View all available purchase options and get full access to this article.
References
ADINA (2001). ADINA—finite element computer program, theory and modeling guide, Vol. 1, Report ARD 01-7.
Baladi, G. Y., and Chen, W. F. (1985). “Soil plasticity: Theory and implementation.” Elsevier, Amsterdam.
Barksdale, R. G. (1971). “Compressive stress pulse times in flexible pavements for use in dynamic testing.” Highway Research Record. 345, Highway Research Board, Washington, D.C., 643–666.
Bathe, K. J. (1996). Finite element procedures, 2nd Ed., Prentice–Hall, Englewood Cliffs, N.J.
Biggs, J. M. (1964). Introduction to structural dynamics, McGraw–Hill, N.Y.
Brunton, J. M., and D’Almeida, J. R. (1992). “Modeling material nonlinearity in a pavement back-calculation procedure.” Transportation Research Record. 1377, TRB, National Research Council, Washington, D.C., 99–106.
Canroad Transportation Research Corporation (CTRC). (1986). “Vehicle weight and dimension study.” Ottawa.
Cho, H. Y., McCullough, F. B., and Weissmann J. (1996). “Considerations on finite element method application in pavement structural analysis.” Transportation Research Record. 1539, TRB, National Research Council, Washington, D.C., 96–101.
Croney, C., and Croney, P. (1991). Design and performance of road pavements, 3rd Ed., McGraw–Hill, N.Y.
Dawson, A. R., and Plaistow, L. (1996). “Parametric study-flexible pavements.” Flexible pavements, Balkema, Rotterdam, 229–237.
Desai, C. S., and Siriwardane, H. J. (1984). Constitutive laws for engineering material, Prentice–Hall, Englewood Cliffs, N.J.
Dondi, G. (1994). “Three-dimensional finite element analysis of a reinforced paved road.” Fifth International Conference on Geotextiles, Geomembranes and Related Products, Vol. 1, Singapore, 95–100.
Drucker, D. C., and Prager, W. (1952). “Soil mechanics and plastic analysis or limit design.” Q. Appl. Math., 10, 157–165.
Helwany, S., Dyer, J., and Leidy, J. (1998). “Finite element analysis of flexible pavements.” J. Transp. Eng., 124(5), 491–499.
Himeno, K., Kamijima, T., Ikeda, T., and Abe, T. (1997). “Distribution of tire contact pressure of vehicles and its influence on pavement distress.” ISAP—8th International Conference on Asphalt Pavements.
Hjelmstad, K. D., Kim, J., and Zuo, Q. H. (1997). “Finite element procedures for three-dimensional pavement analysis.” Proc., Aircraft/Pavement Technology: In the Midst of Change, ASCE, New York, 125–137.
Huang, Y. H. (1993). Pavement analysis and design, Prentice–Hall, Englewood Cliffs, N.J.
Kim, J., and Buttlar, W. G. (2002). “Analysis of reflective crack control system involving reinforced grid over base-isolating interlayer mixture.” J. Transp. Eng., 128(4), 375–384.
Kuo, M. C., Hall, K. T., and Darter, M. (1995). “Three-dimensional finite element model for analysis of concrete pavement support.” Transportation Research Record. 1505, TRB, National Research Council, Washington, D.C., 119–127.
Liu, X., Scarbas, A., Blaauwendraad, J., and Genske, D. D. (1998). “Geogrid reinforcing of recycled aggregate materials for road construction: Finite element investigation.” Transportation Research Record. 1611, TRB, National Research Council, Washington, D.C., 78–85.
Poorooshasb, H. B. (1961). “The properties of soils and other granular media in simple shear.” PhD thesis, Cambridge Univ., U.K.
Prozzi, J. A., and Madanat, S. M. (2002). “A nonlinear model for predicting pavement serviceability.” TRB, Annual Meeting CD-ROM, 1–17.
Schofield, A., and Wroth, C. P. (1968). Critical state soil mechanics, McGraw–Hill, N.Y.
Terrel, R. L., Awad, I. S., and Foss, L. R. (1974). “Techniques for characterizing bituminous materials using a versatile triaxial testing system.” Fatigue and Dynamic Testing of Bituminous Mixtures, ASTM STP 561, American Society for Testing and Materials, Philadelphia, 47–66.
Tutumluer, E., and Thompson, M. R. (1997). “Anisotropic modeling of granular bases in flexible pavements.” Transportation Research Record. 1577, TRB, National Research Council, Washington, D.C., 18–26.
Uddin, W. and Ricalde, L. (2000). “Nonlinear material modeling and dynamic finite element simulation of asphalt pavement.” Fourteenth Engineering Mechanics Conference, ASCE, Austin, Tex.
White, T., Haddock, J. E., Hand, A. H., and Fang, H. (2002). “Contribution of pavement structural layers to rutting of hot mix asphalt pavements.” NCHRP Rep. No. 468, TRB, National Research Council, Washington D.C.
Yoder, E. J., and Witczak, M. W. (1975). Principles of pavement design, 2nd Ed., Wiley, N.Y.
Zaghloul, S. M., and White, T. D. (1993). “Use of a three-dimensional, dynamic finite element program for analysis of flexible pavement.” Transportation Research Record. 1388, TRB, National Research Council, Washington, D.C., 60–69.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Apr 1, 2003
Accepted: Jul 20, 2004
Published online: Jun 1, 2005
Published in print: Jun 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.