Practical, Interactive, and Object-Oriented Machine Vision for Highway Crack Sealing
Publication: Journal of Transportation Engineering
Volume 131, Issue 6
Abstract
This paper discusses a machine vision system that is used to find pavement cracks for a robotic crack sealing machine. The system includes a high-resolution digital camera which captures live or still images of the robot’s 3.7 m by 4.3 m (12 ft by 14 ft) workspace. The live images are used for overall crack searching, whereas the higher resolution still images allow for accurate robot path planning. The operator interacts with the system to select cracks to be sealed. With the significant advancement in graphical and object-oriented programming, interactive and object-oriented machine vision offers advantages over fully automatic machine vision in that it is much less expensive, requires less complex hardware, its algorithms are much simpler, easier to develop and implement, and the operation can be much easier, faster, and more accurate reliable. The machine vision system described has been successfully used for sealing many actual highway pavement cracks.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
The writers gratefully acknowledge the Division of Research and Innovation of the California Department of Transportation which has supported this work through the Advanced Highway Maintenance and Construction Technology (AHMCT) Research Center at the University of California, Davis.
References
Aart, E., and Korst, J. (1989). Simulated annealing and Boltzmann machines, Wiley, New York.
Cheng, H. D., Chen, J.-R., Glazier, C., and Hu, Y. G. (1999). “Novel approach to pavement cracking detection based on fuzzy set theory.” J. Comput. Civ. Eng., 13(4), 270–280.
Dantzig, G., Fulkerson, D., and Johnson, S. (1954). “Solution of a large-scale traveling-salesman.” J. Oper. Res. Soc., 2, 393–410.
Feng, X., Velinsky, S. A., and Hong, D. (2002). “Integrating embedded PC and Internet technologies for real-time control and imaging.” IEEE/ASME Trans. Mechatron., 7(1), 52–60.
Glover, F., and Punnen, A. P. (1997). “The traveling salesman problem: New solvable cases and linkages with the development of approximation algorithms.” J. Oper. Res. Soc., 48, 502–510.
Greer, R., Kim, Y. S., and Haas, C. (1997). “Telerobotic control for automated construction and maintenance.” Presented at Proc., 78th Annual TRB Meeting. Washington, D.C.
Hoenig, S. (1998). “Plug-in components for MFC.” Dr. Dobb's J., August, 88–95.
Kim, Y. S., Haas, C. T., and Greer, R. (1998). “Path planning for machine vision assisted, teleoperated pavement crack sealer.” J. Transp. Eng., 124(2), 137–143.
Kirkpatrick, S., Gelatt, C. D., Jr., and Vecchi, M. P. (1983). “Optimization by simulated annealing,” Science, 220(4598), 671–680.
Kirschke, K. R., and Velinsky, S. A. (1992). “Histogram-based approach for automated pavement crack- sensing.” J. Transp. Eng., 118(5), 700–710.
Kruglinski, D. J. (1998). Inside Visual C++, Microsoft Press, Redmond, Wash.
Lindley, C. A. (1991). Practical image processing in C, Wiley, New York.
Mathurin, R., Guédon-Dubied, J.-S., and Martineau, F. (1994). “Quantification des gels d’alcali-réaction par traitement numérique d’images.” J. Sciences l’Ingénieur Réseau Laboratoires P.C., Presqu’île de Giens, 4–7 Octobre.
Metropolis, N., Rosenbluth, A. W., Rosenbluth, M. N., Teller, A. H., and Teller, E. (1953). “Equation of state calculations by fast computing machines.” J. Chem. Phys., 21(6), 1087–1092.
Poliner, J., Wilmington, R., Klute, G. K., and Micocci, A. (1993). “Evaluation of lens distortion errors in video-based motion analysis.” NASA Technical Paper 3266, Washington, D.C.
Press, W. H., Flannery, B. P., Teukolsky, S. A., and Vetterling, W. T. (1992) Numerical recipes in C, Cambridge University Press, Cambridge, U.K.
Pynn, J., Wright, A., and Lodge, R. (1999). “Automatic identification of cracks in road surfaces.” Proc., 7th International Conf. on Image Processing and its Applications, Vol. 2, Manchester, U.K., 671–671.
Velinsky, S. A. (1993). “Heavy vehicle system for automated pavement crack sealing.” Heavy Vehicle Sys., Int. J. Vehicle Des., 1(1), 114–128.
Velinsky, S. A., Feng, X., and Bennett, D. A. (2003). “Operator controlled, vehicle-based crack sealing machine.” Heavy Vehicle Sys. Int. J. Vehicle Des., 10(3) 145–166.
Wolf, P. R. (1974). Elements of photogrammetry, McGraw-Hill, New York.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Jul 31, 2003
Accepted: Jun 29, 2004
Published online: Jun 1, 2005
Published in print: Jun 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.