Why Different Fatigue Lives? Answer Is in the Tomograms
Publication: Journal of Transportation Engineering
Volume 131, Issue 10
Abstract
In this study, tomograms of bituminous mixtures with a photon energy of 120 kV are taken with a multidetector X-ray scanner. These tomograms are cross-sectional images of the internal structure of specimens in a cutting plane surface. The purpose of taking these tomograms was to find out the main factor/factors causing different fatigue lives for replicated specimens using images of the internal structure of specimens. After taking the tomograms, the fatigue tests were carried out using repeated-loading indirect tensile test equipment. In addition to conventional fatigue model parameters, new parameters, which are acquired from the cross-sectional surface tomograms, are taken into consideration to be able to explain the variations in the fatigue lives of similar specimens. These new models help explain the variations in fatigue lives of similar specimens tested under identical conditions. Hence, tomograms will help us define the fatigue lives of specimens in a nondestructive way.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aylmore, L. A. G., and Hainsworth, J. M. (1983). “The use of computer assisted tomography to determine spatial distribution of soil water content.” Austral. J. Soil Res., 21, 435–443.
Aylmore, L. A. G., and Hainsworth, J. M. (1986). “Water extraction by single plant roots.” Soil Sci. Soc. Am. J., 50, 841–848.
Braz, D., Lopes, R. T., and Motta, L. M. G. (1999). “Computed tomography in the fatigue test in an asphaltic mixture.” Appl. Radiat. Isot., 50, 661–671.
Braz, D., Lopes, R. T., and Motta, L. M. G. (2000). “Computed tomography: An evaluation of the effect of adding polymer SBS to asphaltic mixtures used in paving.” Appl. Radiat. Isot., 53, 725–729.
Brown, S. F., and Brunton, J. M. (1986). An introduction to the analytical design of bituminous mixtures, 3rd Ed., University of Nottingham Press, Nottingham, U.K.
Bullen, F., and Preston, N. (1992). “Extending the use of Nottingham asphalt tester.” Proc., 7th International Conf. on Asphalt Pavements, Vol. V-I, 35–44.
Cooper, K. E., and Pell, P. S. (1974). “The effect of mix variables on the fatigue strength of bituminous materials.” Transport and Road Research Laboratory Rep. No. 633, Transport and Road Research Laboratory, Crowthorne, U.K.
Hounsfield, G. N. (1972). “Computerized transverse axial scanning (Tomography) I: Description of system.” Br. J. Radiol., 46, 1016–1022.
Moore, R. K., and Kennedy, T. W. (1971). “Tensile behavior of subbase materials under repetitive loading.” Research Rep. No. 98-12, Center for Highway Research, Univ. of Texas at Austin, Austin, Tex.
Petrovic A. M., Siebert, J. E., and Rieke, P. E. (1982). “Soil bulk density analysis in three-dimension by computed tomography scanning.” Soil Sci. Soc. Am. J., 46(3), 445–450.
Porter, B. W., and Kennedy, T. W. (1975). “Comparison of fatigue test methods for asphalt materials.” Research Rep. No. 183-4, Univ. of Texas at Austin, Austin, Tex.
Powel, W. D., Potter, J. F., Mayhew, H. C., and Nunn, M. E. (1984). “The structural design of bituminous roads.” Transport and Road Research Laboratory Rep. No. 1132, Transport and Road Research Laboratory, Crowthorne, U.K.
Schmidt, R. J. (1972). “A practical method for measuring the resilient modulus of asphalt-treated mixes.” Highw. Res. Rec., 404, 22–32.
Strategic Highway Research Program (SHRP). (1994). “Fatigue response of asphalt-aggregate mixes,” Contract SHRP-A-404, National Research Council, Washington, D.C.
Tigdemir, M., Kalyoncuoglu, S. F., and Kalyoncuoglu, U. Y. (2004). “Application of ultrasonic method in asphalt concrete testing for fatigue life estimation.” NDT & E Int., 37(8), 597–602.
Tigdemir, M., Karasahin, M., and Kalyoncuoglu, S. F. (2001). “Development of new low-cost indirect tensile test equipment for bituminous mixtures.” J. Test. Eval., 29(4), 387–392.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Dec 2, 2003
Accepted: Dec 27, 2004
Published online: Oct 1, 2005
Published in print: Oct 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.