Microscale Emission Models Incorporating Acceleration and Deceleration
Publication: Journal of Transportation Engineering
Volume 130, Issue 3
Abstract
Even though the MOBILE5 model has been widely used in air-quality analysis, it cannot be used in the evaluation of transportation improvements that result in a reduction of vehicle acceleration or deceleration. In this study, least-square regression models were developed to take into account the effect of acceleration or deceleration. To fully capture the dynamics of acceleration or deceleration, the value of acceleration or deceleration in the current period and those in previous periods were included. In addition, the durations of acceleration or deceleration were also considered. Grade was incorporated into the models by using it to adjust the values of acceleration or deceleration. In addition to these independent variables, variables that represent tractive power were also introduced into the models. The results from the calibration of the models indicated that most of the coefficients can be reasonably explained. The emissions model developed in this study was evaluated from microscopic and macroscopic perspectives. The results show that the emissions model developed in this study performs better than two other existing emissions models.
Get full access to this article
View all available purchase options and get full access to this article.
References
An, F., Barth, M., Norbeck, J., and Ross, M. (1997). “Development of comprehensive modal emissions model—Operating under hot-stabilized conditions.” Transportation Research Record 1587, Transportation Research Board, Washington, D.C., 52–62.
Ahn, K., Trani, A. A., Rakha, H., and Van Aerde, M. (1999). “Microscopic fuel consumption and emission models.” Paper presented at 78th Annual Transportation Research Board Meeting, Washington, D.C.
Barth, M., An, F., Younglove, T., Scora, G., Levine, C., Ross, M., and Wenzel, T. (2000). “Comprehensive modal emissions model (CMEM), Version 2.0, user’s guide.” Univ. of California, Riverside, Riverside, Calif.
Dion, F., Van Aerde, M., and Rakha, H. (2000). “Mesoscopic fuel consumption and vehicle emission rate estimation as a function of average speed and number of stops.” Paper presented at 79th Annual Transportation Research Board Meeting, Washington, D.C.
Heirigs, P., Delaney, S., and Dulla, R. (2001). “MOBILE6 on-road motor vehicle emissions model, 5 day training course.” Prepared for the U.S. Environmental Protection Agency, Contract No. 68-C7-0051, Work Assignment 30-6, Washington, D.C.
National Academy of Sciences (NAS). (2000). “Modeling mobile-source emissions.” National Academy Press, Washington, D.C.
Teng, H. (2001). “Analytical tool for measuring emission impact of ACCEL/DECEL.” Final Rep., prepared for the New Jersey Dept. of Transportation and Federal Highway Administration, Washington, D.C.
U.S. Environmental Protection Agency (U.S. EPA). (1998). “Assessing the emissions and fuel consumption impacts of intelligent transportation systems.” EPA 231-R-98-007, Washington, D.C.
Yu, L. (1997). “Collection and evaluation of modal traffic data for determination of vehicle emission rates under certain driving conditions.” Research Rep. No. 1485-1, Texas Dept. of Transportation in Cooperation with U.S. Dept. of Transportation, Federal Highway Administration, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Mar 27, 2002
Accepted: Aug 16, 2002
Published online: Apr 15, 2004
Published in print: May 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.