Back-Calculation of Concrete Pavement Modulus Using Road-Rater Data
Publication: Journal of Transportation Engineering
Volume 124, Issue 2
Abstract
This paper deals with the back-calculation of elastic modulus of jointed concrete pavement. A series of road-rater tests are carried out on a jointed, Portland cement concrete (PCC) pavement of a partially completed freeway in Taiwan. The deflection data obtained with a road rater are used to back-calculate the modulus of elasticity of the PCC pavement and the coefficient of subgrade reaction. The back-calculation is done using BACK, a computer program developed based on the plate theory. The validity of the BACK program is verified with measured deflections, as well as predictions by ILLISLAB, an existing finite element code that has been proven reliable in predicting pavement responses. The results of this study show that the BACK program is quite reliable in predicting the elastic modulus of PCC pavement and the coefficient of subgrade reaction. However, the results are based on the analysis of PCC pavement over a granular subgrade and may not be directly applicable to those over asphalt-stabilized subbases.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Hall, K. T., and Alaeddin, M. (1991). “Back calculation of asphalt concrete-overlaid Portland cement concrete pavement layer moduli.”Transp. Res. Rec. 1293, Transp. Res. Board, Washington, D.C., 112–123.
2.
Hoffman, M. S., and Thompson, M. R. (1982). “Comparative study of selected nondestructive testing devices.”Transp. Res. Rec. 852, Transp. Res. Board, Washington, D.C., 32–41.
3.
Ioannides, A. M.(1990). “Dimensional analysis in NDT rigid pavement evaluation,”J. Transp. Engrg., ASCE, 116(1), 23–36.
4.
Ioannides, A. M., and Korovesis, G. T.(1992). “Analysis and design of doweled slab-on-grade pavement system.”J. Transp. Engrg., ASCE, 118(6), 745–768.
5.
Korovesis, G. T. (1990). “Analysis of slab-on-grade pavement systems subjected to wheel and temperature loading,” PhD thesis, Univ. of Illinois, Urbana Champaign, Ill.
6.
Lin, P. S., Wu, Y. T. Huang, and T. K., and Juang(1996). “Equivalent single-axle load factor for rigid pavements.”J. Transp. Engrg., ASCE, 122(6), 462–467.
7.
“On the practical design of rigid pavements in Taiwan.” (1993). Tech. Rep. Prepared for Taiwan Area National Expressway Engineering Bureau (TANEEB), Dept. of Civ. Engrg., Nat. Chung-Hsing Univ., Taichung, Taiwan.
8.
Van Cauwelaert, F. T., Alexander, D. R., White, T. D., and Baker, W. R. (1989). “Multi-layer elastic program for back-calculating layer moduli in pavement evaluation.”Special Tech. Publ. STP 1026, ASTM, Philadelphia, Pa.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Mar 1, 1998
Published in print: Mar 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.