Integrated Model for Lane-Use and Signal-Phase Designs
Publication: Journal of Transportation Engineering
Volume 123, Issue 2
Abstract
The development of a codable model for the design of lane-use and signal-phase control at isolated intersections is valuable especially in developing countries where experienced traffic engineers are scarce. Extensive research concerning the design of signal phases and timing have been conducted in the past while very little has been done for the optimal design of the lane-use or lane-configuration of intersection approaches. However, poor matching of lane-use design and signal-phase design also produces a poor overall result. It is therefore necessary to integrate the design of lane uses and signal phases, and perform the optimization simultaneously. A mixed integer linear programming model is introduced for this purpose. The resultant designs are verified by comparing their performance indices with that of the existing designs as computed by TRANSYT-7F. The traffic data used are collected from a selected area of Shenzhen, one of the largest special economic zones of the People's Republic of China. The results indicate significant improvement in minimizing overall delay, stop, and fuel consumption.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allsop, R. E.(1971). “Delay minimizing setting for fixed-time traffic signals at a single road junction.”J. Inst. Mathematical Applications, 8(2), 164–185.
2.
Allsop, R. E. (1972). “Estimating the traffic capacity of a signalized road junction.”Transp. Res., Vol. 8, 245–255.
3.
Bryson, D. A., and Stone, J. R. (1987). “Intersection advisor: an expert system for intersection design.”Transp. Res. Rec. 1145, Transportation Research Board, National Research Council, Washington, D.C., 48–53.
4.
Cantarella, G. E., and Improta, G. (1984). “Control system design for an individual signalized junction.”Transp. Res., 18B(2), 147–168.
5.
Cantarella, G. E., and Improta, G. (1988). “Capacity factor or cycle time optimization for signalized junctions: a graph theory approach.”Transp. Res., 22B(1), 1–23.
6.
Chard, B. M., and Lines, C. J.(1987). “TRANSYT—the latest developments.”Traffic Engrg. and Control, 28(7/8), 387–390.
7.
Garey, M. R., and Johnson, D. S. (1979). Computers and intractability, a guide to the theory of NP-completeness. W. H. Freeman and Co., San Francisco, Calif.
8.
Heydeckor, B. G.(1983). “Vehicles, PCUs and TCUs in traffic signal calculations.”Traffic Engrg. and Control., 24(3), 111–114.
9.
Transport Department. (1986). Transport planning and design manual, Vol. 4, Hong Kong Government, Hong Kong, China.
10.
Wilbur, T.(1985). “A survey of TRANSYT-7F applications.”Traffic Engrg. and Control, 26(10), 498–501.
11.
Willumsen, L. G., and Coeymans, J. E.(1989). “The value of fixed-time signal co-ordination in developing countries: 1. Application of TRANSYT to Santiago.”Traffic Engrg. and Control., 30(2), 58–62.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Mar 1, 1997
Published in print: Mar 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.