Effect of Rest Periods on Fatigue Response of Asphalt Concrete Mixtures
Publication: Journal of Transportation Engineering
Volume 122, Issue 4
Abstract
The purpose of this research is to study the effect of rest periods on the fatigue response of asphalt concrete mixtures due to the repeated loading applications by using linear elastic fracture mechanics and Schapery's theory of viscoelastic media crack growth. The results of a series of third-point bending tests indicated that the two fatigue damage properties K1 and K2 were in good agreement with those of the theoretical prediction having the expression of the constant values of failure zone size and fracture energy in the crack growth. Specimens with low temperature and asphalt content of 0.5% more than optimum content exhibited longer fatigue life due to the higher stiffness in the mixtures. Besides, the number of repetitions to failure increased with the rest period and was more significantly exhibited at higher temperature.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Adedimila, A. S., and Kennedy, T. W. (1975). “Fatigue and resilient characteristics of asphalt mixtures by repeated-load indirect tensile test.”Res. Rep. No. 183-5. Ctr. for Hwy. Res., Univ. of Texas at Austin, Austin, Tex.
2.
Bonnaure, F. P., Gest, G., Gravois, A., and Uge, P. (1977). “A new method of predicting stiffness of asphalt paving mixtures.”Proc. AAPT, Assoc. of Asphalt Paving Technologists, St. Paul, Minn.
3.
Bonnaure, F. P., Huibers, A. H. J. J., and Boonders, A.(1982). “A laboratory investigation of the influence of rest periods on the fatigue characteristics of bituminous mixes.”Proc., AAPT, Assoc. of Asphalt Paving Technologists, St. Paul, Minn., 51, 105–121.
4.
Francken, L. (1979). “Fatigue performance of a bituminous road mix under realistic test conditions.”TRR 713, Highway Research Board (HRB), Washington, D.C.
5.
Jayawickrama, P. W. (1985). “Methodology for predicting asphalt concrete overlay life against reflection cracking,” MS thesis, Texas A&M Univ., College Station, Tex.
6.
Matthews, J. M., Monismith, C. L., and Craus, J.(1993). “Investigation of laboratory fatigue testing procedures for asphalt aggregate mixtures.”J. Transp. Engrg., ASCE, 119(4), 634–654.
7.
Mix design method for asphalt concrete manual. (1984). The Asphalt Inst., College Park, Md.
8.
Molenaar, A. A. A.(1984). “Fatigue and reflection cracking due to traffic loads.”Proc., AAPT, Assoc. of Asphalt Paving Technologists, St. Paul, Minn., 53, 440–473.
9.
Monismith, C. L., Epps, J. A., Kasianchuk, D. A., and Mclean, D. B. (1970). “Asphalt mixture behavior in repeated flexure.”Rep. No. TE 70-5. Univ. of California, Berkeley, Calif.
10.
Pell, P. S., and Cooper, K. E.(1975). “The effect of testing and mix variables on the fatigue performance of bituminous materials.”Proc., AAPT, Assoc. of Asphalt Paving Technologists, St. Paul, Minn., 44, 1–41.
11.
Raithby, K. D., and Sterling, A. B. (1972). “Some effects of loading history on the fatigue performance of rolled asphalt.”Rep. LR 496. Transport and Road Res. Lab., England.
12.
Ruth, E. B., and Olson, K. G.(1977). “Creep effects on fatigue testing of asphalt concrete.”Proc., AAPT, Assoc. of Asphalt Paving Technologists, St. Paul, Minn., 46, 177–196.
13.
Schapery, R. A.(1975). “A theory of crack initiation and growth in viscoelastic media I, theoretical development.”Int. J. Fracture, 11, 141–159.
14.
Schapery, R. A. (1984). “Correspondence principles and a generalized J -integral for large deformation and fracture analysis of viscoelastic media.”Int. J. Fracture, 25, 195–223.
15.
Standard practice for preparation of bituminous mixture beam specimens by means of the California kneading compactor; Designation D 3202-83. (1988). ASTM, Philadelphia, Pa., 343–345.
16.
“Standard specification for highway materials and method of sampling and testing.” (1990). Rep., Amer. Assoc. of State Hwy. and Transp. Officials, Washington, D.C.
17.
Standard test method for indirect tension test for resilient modulus of bituminous mixtures; Designation D 4123-82. (1988). ASTM, Philadelphia, Pa., 503–506.
18.
Tseng, K. H., and Lytton, R. L. (1990). “Fatigue damage properties of asphalt concrete pavements.”TRR 1286, Transp. Res. Board (TRB), Washington, D.C., 150–163.
19.
Van der Poel, C.(1954). “A general system describing the viscoelastic properties of bitumens and its relation to routine test data.”J. Appl. Chem. and Biotechnol., 4(5), 221–236.
20.
Verstraeten, J., Beverka, V., and Francken, L.(1982). “Rational and practical design of asphalt pavements to avoid cracking and rutting.”Proc., 5th Int. Conf. on Struct. Des. of Asphalt Pavements, Univ. of Michigan, Ann Arbor, Mich., 1, 45–52.
21.
Yoder, E. J., and Witczak, M. W. (1975). Principles of pavement design, 2nd Ed., John Wiley and Sons, Inc., New York, N.Y., 282–289.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Jul 1, 1996
Published in print: Jul 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.