Study of Parameters Affecting Impulse Response Method
Publication: Journal of Transportation Engineering
Volume 122, Issue 4
Abstract
Even though the impulse response method is widely used in detecting defects under rigid pavements, the sensitivity of the method is not well understood. Modal time-history analyses were used to numerically simulate the impulse response method. Parameters such as the thickness and the elastic modulus of the slab, the modulus of subgrade of the soil, the length and width of the slab, location of the impact, and size and location of defects were studied. The sensitivity of flexibility spectrum, the major function measured in the field to detect defects, to each of these parameters was studied. It was found that the elastic modulus and dimensions of the slab have small effects, while the thickness of the slab and the modulus of subgrade more significantly affect the flexibility spectrum. For most practical applications, corner voids that are twice the thickness of the slab should be detectable. For edge and midslab, the defect has to be four and five times the slab thickness (respectively) to be detectable.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Brochure—worldwide testing and inspection, slab testing and impedance method. (1990). Test Consultant CEBTP, Chestire, England.
2.
Cook, R. D., Malkus, S. D., and Plesha, M. E. (1989). Concepts and applications of finite element analysis, 3rd Ed., John Wiley and Sons, New York, N.Y.
3.
Dobry, R., and Gazetas, G.(1986). “Dynamic response of arbitrary shaped foundations.”J. Geotech. Engrg., ASCE, 112(2), 109–315.
4.
Gazetas, G.(1983). “Analysis of machine foundation vibration: State of the art.”Soil Dynamics and Earthquake Engrg., 2(1), 1–42.
5.
Lysmer, J., and Richart, F. E. (1966). “Dynamic response of footings to vertical loading.”J. Soil Mech. and Found. Div., ASCE 92(1), 65–91.
6.
Nazarian, S., Baker, M., and Reddy, S. (1991). “Feasibility of seismic pavement analyzer as a maintenance tool.”Res. Rep. 91-12, Ctr. for Geotech. and Highway Material Res., University of Texas at El Paso, El Paso, Tex.
7.
Nazarian, S., Baker, M., and Crain, K. (1993). “Fabrication and testing of a seismic pavement analyzer.”Res. Rep. 93-8, Ctr. for Geotech. and Highway Material Res., University of Texas at El Paso, El Paso, Tex.
8.
Nazarian, S., Reddy, S., and Baker, M. (1994). “Determination of voids under rigid pavements using impulse response method.”STP 1198, ASTM, Philadelphia, Pa., 473–87.
9.
Olson, D. L., and Wright, C. (1990). “Nondestructive testing for repair and rehabilitation.”ACI Concrete International: Design and Construction, American Concrete Institute (ACI), Detroit, Mich., 5–11.
10.
Reddy, S. (1992). “Improved impulse response testing—theoretical and practical validations,” MS thesis, University of Texas at El Paso, El Paso, Tex.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Jul 1, 1996
Published in print: Jul 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.