Optimal Pipeline Sizing Technique
Publication: Journal of Transportation Engineering
Volume 122, Issue 3
Abstract
In this paper, the writers present a formula for sizing steel pipelines of optimal diameter with equally spaced, similar pumping units. The general case of an inclined pipeline with fitting is considered in the analysis. The sizing formula is based on a friction-factor formula that spans through all the flow regimes of the Moody diagram. Although the formula is implicit, the final solution is attained after a limited number of trial cycles. A simple computer program carries out design calculations and provides the optimal pipeline size as well as spacing between pumping units. Solved numerical examples are provided to demonstrate the simplicity and practicability of the proposed technique.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Albertson, M., Barton, J., and Simons, D. (1960). Fluid mechanics for engineers . Prentice-Hall, Inc., New York, N.Y.
2.
Cheremisinoff, P. N., Cheremisinoff, N. P., and Cheng, S. L., eds. (1988). Civil engineering practice . 2-Hydraulics/Mechanics., Technomic Publishing Co., Lancaster, Pa.
3.
Churchill, S. W.(1977). “Friction-factor equation spans all fluid-flow regimes.”Chem. Engrg., 84(24), 91–92.
4.
Daugherty, R., and Franzini, J. (1977). Fluid mechanics with engineering applications . 5th Ed., McGraw-Hill Book Co., New York, N.Y.
5.
Davis, C., and Sorensen, K. (1969). Handbook of applied hydraulics . 3rd Ed., McGraw-Hill Book Co., New York, N.Y.
6.
Hathoot, H. M.(1980). “Optimum design of irrigation pipelines.”Bull., Int. Commission on Irrig. and Drain. (ICID), 29(2), 73–76.
7.
Hathoot, H. M.(1984). “Minimum cost design of horizontal pipelines.”J. Transp. Engrg., ASCE, 110(3), 382–389.
8.
Hathoot, H. M.(1986). “Minimum cost design of pipelines.”J. Transp. Engrg., ASCE, 112(2), 465–480.
9.
Russel, G. (1963). Hydraulics . 5th Ed., Holt, Rinehart and Winston, New York, N.Y.
10.
Russel, G. (1966). Standard handbook for mechanical engineering . McGraw-Hill Book Co., New York, N.Y.
11.
Scaloppi, E. J., and Allen, R. G.(1993). “Hydraulics of center-pivot laterals.”J. Irrig. and Drain. Engrg., ASCE, 119(3), 554–567.
12.
Streeter, V. L., and Wylie, B. E. (1983). Fluid mechanics . Int. Stud. Ed., McGraw-Hill Book Co., New York, N.Y.
13.
Swamee, P., and Jain, A. (1976). “Explicit equations for pipe flow problems.”J. Hydr. Div., ASCE, 657–664.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: May 1, 1996
Published in print: May 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.