Human Factors in Highway Geometric Design
Publication: Journal of Transportation Engineering
Volume 122, Issue 1
Abstract
Research of human factors in highway engineering may be seen to include two main areas: the effect of geometric design on driver behavior, and the consideration of driver behavior variability. A critical review of pertinent research and related provisions in the design guidelines of the United States, Germany, and Great Britain is carried out in this paper, and shows that, although a variety of highway-design assessment methods with respect to the aforementioned research areas have been suggested in literature, the relevant findings have not yet been satisfactorily incorporated into highway design guidelines. On the basis of the aforementioned research findings and existing guidelines' provisions, a framework is discussed that allows for the consideration of “nondesign” road users, such as older drivers, and also incorporates checks for the overall safety of design as a feedback loop in the design process.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alexander, G. J., and Lunenfeld, H. (1986). “Driver expectancy in highway design and traffic operations.”Final Rep., Federal Hwy. Admin., Washington, D.C.
2.
Benekohal, R. F., Michaels, R. M., Resende, P. T. V., and Shim, E. (1994). “Highway design and traffic operation needs of older drivers.”Proc., 73rd Annu. Meeting, Transp. Res. Board, Washington, D.C.
3.
Brackett, R. Q. (1993). “Measurement of driver workload.”Proc., 72nd Annu. Meeting, Transp. Res. Board, Washington, D.C.
4.
Department of Transport (United Kingdom). (1984). “Highway link design.”Departmental Advice Note TA 43/84, London, U.K.
5.
DRIVE—research and Technology Development in Advanced Road Transport Telematics. (1992). Commission of the European Communities (DG XIII), Brussels, Belgium.
6.
Eggemeier, F. T., Melville, B. E., and Crabtree, M. S. (1984). “The effect of intervening task performance on subjective workload ratings.”Proc., Human Factors Soc. 28, 954–958.
7.
Evans, L. (1991). Traffic safety and the driver . Van Nostrand Reinhold, New York, N.Y.
8.
German Road and Transportation Research Association. (1984). “Guidelines for the design of roads.”RAS-L-1, Committee 2.3., Geometric Des. Standards, Cologne, Germany.
9.
Haight, F. A.(1986). “Risk, especially risk of traffic accident.”Accident Anal. and Prevention, 18(5), 359–366.
10.
Hale, A. R.(1990). “Safety and speed: A systems view of determinants and control measures.”IATSS Res., 14(1), 59–65.
11.
Hall, J. W., and Dudek, C. L., eds. (1994). “Driver performance data book update.”Transp. Res. Circular 419, Transp. Res. Board, Washington, D.C.
12.
Hancock, P. A., Wulf, G., Thom, D., and Fassnacht, P.(1990). “Driver workload during different driving maneuvers.”Accident Anal. and Prevention, 22(3), 281–290.
13.
Hirsh, M.(1987). “Probabilistic approach to consistency in geometric design.”J. Transp. Engrg., ASCE, 113(3), 268–276.
14.
Hirsh, M., Prashker, J. N., and Ben-Akiva, M. (1986). “New approach to geometric design of highways.”Transp. Res. Rec. 1100, Transp. Res. Board, Washington, D.C., 50–57.
15.
Kanellaidis, G., Golias, J., and Efstathiadis, S. (1990). “Drivers' speed behaviour on rural road curves.”Traffic Engrg. and Control, 31(7), 414–415, London, U.K.
16.
Kanellaidis, G.(1991). “Aspects of highway superelevation design.”J. Transp. Engrg., ASCE, 117(6), 624–632.
17.
Kanellaidis, G., and Dimitropoulos, I. (1994). “Subjective and objective evaluation of risk on roadway curves.”Traffic Engrg. and Control, 35(7/8), 451–454, London, U.K.
18.
Koornstra, M. J. (1989). “A general systems approach of collective and individual risk in road traffic.”Proc., Int. Symp., La Prévention Routière, Caen, France.
19.
Krammes, R. A. (1994). “Design speed and operating speed in rural highway alignment design.”Proc., 73rd Annu. Meeting, Transp. Res. Board, Washington, D.C.
20.
Krammes, R. A., and Glascock, S. W. (1992). “Geometric inconsistencies and accident experience on two-lane rural highways.”Transp. Res. Rec. 1356, Transp. Res. Board, Washington, D.C., 1–10.
21.
Lamm, R., Choueiri, E. M., Mailaender, T., and Paluri, A. (1989). “A logical approach to geometric design consistency of two-lane rural roads in the U.S.A.” Proc., 11th Int. Road Federation World Meeting, Int. Road Federation, Geneva, Switzerland, Vol. II, 8–11.
22.
Lamm, R., Hayward, J. C., and Cargin, J. G. (1986). “Comparison of different procedures for evaluating speed consistency.”Transp. Res. Rec. 1100, Transp. Res. Board, Washington, D.C., 10–20.
23.
Lamm, R., Guenther, A. K., and Choueiri, E. M. (1992). “Safety module for highway design: applied manually or using CAD.”Proc., 71st Annu. Meeting, Transp. Res. Board, Washington, D.C.
24.
Leisch, J. E., and Leisch, J. P. (1977). “New concepts in design speed application.”Transp. Res. Rec. 631, Transp. Res. Board, Washington, D.C., 4–14.
25.
Lunenfeld, H. (1993). “Human factors associated with interchange design features.”Transp. Res. Rec 1385, Transp. Res. Board, Washington, D.C., 84–89.
26.
McLean, J. R.(1981). “Driver speed behaviour and rural road alignment design.”Traffic Engrg. and Control, 4(1981), 208–211.
27.
Messer, C. J., Mounce, J. M., and Brackett, R. Q. (1981). Highway geometric design consistency related to driver expectancy . Vols. II and III, Federal Hwy. Admin., Washington, D.C.
28.
Michaels, R. M. (1994). “Using driver response to evaluate a complex highway design.”Proc., 73rd Annu. Meeting, Transp. Res. Board, Washington, D.C.
29.
A policy on geometric design of highways and streets. (1990). Am. Assoc. of State Hwy. and Transp. Officials (AASHTO), Washington, D.C.
30.
Polus, A., and Dagan, D. (1987). “Models for evaluating the consistency of highway alignment.”Transp. Res. Rec. 1122, Transp. Res. Board, Washington, D.C., 47–56.
31.
Sabey, B. E., and Taylor, H. (1980). “The known risks we run: the highway.”TRRL Supplementary Rep. 567, Transport and Road Res. Lab. (TRRL), Crowthorne, Berkshire, U.K.
32.
The safety audit for highways. (1990). Inst. of Hwy. and Transp., London, U.K.
33.
Senders, J. W., Kristofferson, A. B., Levison, W. H., Dietrich, C. W., and Ward, J. L. (1967). “The attentional demand of automobile driving.”Hwy. Res. Rec. 195, Highway Res. Board, Washington, D.C., 15–33.
34.
Transportation Research Board. (1987). “Designing safer roads: practices for resurfacing, restoration and rehabilitation.”Spec. Rep. No. 214, Washington, D.C.
35.
Transportation Research Board. (1990). “Safety research in a changing highway environment.”Spec. Rep. 229, Washington, D.C.
36.
Waller, P. (1993). “The need and potential for human factors research in highway safety.”Transp. Res. Circular 414: Human Factors Research in Highway Safety, J. W. Hall and C. L. Dudek, eds., Transp. Res. Board, Washington, D.C.
37.
Watts, G. R., and Quimby, A. R. (1980). “Aspects of road layout that affect drivers' perception and risk taking.”TRRL Supplementary Rep. 920, Transport. and Road Res. Lab. (TRRL), Crowthorne, Berkshire, U.K.
38.
Wooldridge, M. D. (1993). “Design consistency and driver error.”Proc., 72nd Annu. Meeting, Transp. Res. Board, Washington, D.C.
39.
Wright, C. C., and Boyle, A. J.(1987). “Road accident causation and engineering treatment: a review of some current issues.”Traffic Engrg. and Control, 28(9), 475–483.
40.
Zegeer, C., and Council, F. M. (1993). “Highway design, highway safety, and human factors.”Transp. Res. Circular 414: Human Factors Research in Highway Safety, J. W. Hall and C. L. Dudek, eds., Transp. Res. Board, Washington, D.C.
41.
Zeitlin, L. R. (1993). “Subsidiary task measures of driver loading: a long term field study.”Transp. Res. Rec. 1403, Transp. Res. Board, Washington, D.C., 23–27.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Jan 1, 1996
Published in print: Jan 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.