Dynamic Analysis of Rigid Airport Pavements with Discontinuities
Publication: Journal of Transportation Engineering
Volume 118, Issue 3
Abstract
A finite element procedure for the dynamic analysis of rigid airport pavements with discontinuities is presented. The analysis procedure considers the dynamic interaction between aircraft and a rigid pavement. The rigid pavement is modeled as a series of discontinuous, thin‐plate finite elements resting on a viscoelastic foundation. At the discontinuities, the load transfer devices are modeled as vertical springs, the stiffness of which depends on the dowel properties and the dowel‐concrete interaction. The viscoelastic foundation is modeled by distributed springs and dashpots. The moving aircraft loads are represented by masses supported by linear spring and dashpot systems, which have specified horizontal velocities and accelerations. Numerical results obtained from the analytical formulation presented are compared with available analytical solutions and experimental data. A parametric study is conducted to determine the effects of the various parameters on the dynamic response of jointed rigid pavements to moving loads.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Airport pavement design and evaluation.” (1978). FAA Advisory Circular, AC 150/5320‐6C, Federal Aviation Administration, Washington, D.C.
2.
Bathe, K., and Wilson, E. L. (1976). Numerical methods in finite element analysis. Prentice‐Hall.
3.
Chou, Y. T. (1981). “Structural analysis computer programs for rigid multicomponent pavements with discontinuities—WESLIQID and WESLAYER.” Tech. Reports 1, 2, and 3, U.S. Army Engineer Waterways Station, Vicksburg, Miss., May 1981.
4.
Finney, E. A. (1956). “Structural design considerations for pavement joints.” J. Am. Concr. Inst., 53(1), 1–28.
5.
Friberg, B. F. (1940). “Design of dowels in transverse joints of concrete pavements.” Trans., ASCE, 105, 1076–1116.
6.
Huang, Y. H., and Wang, S. T. (1973). “Finite element analysis of concrete slabs and its implications for rigid pavement design.” Highw. Res. Rec., (466), 55–69.
7.
Huang, Y. H. (1974). “Finite element analysis of slabs on elastic solids.” J. Transp. Engrg., ASCE, 100(2), 403–416.
8.
Melosh, R. J. (1963). “Basis for derivation of matrices for the direct stiffness method.” J. AIAA, 1(7), 1631–1637.
9.
Pickett, G., and Ray, G. K. (1951). “Influence charts for concrete pavements.” Trans., ASCE, 116, 49–73.
10.
Saxena, S. K. (1973). “Pavement slab resting on elastic foundation.” Highw. Res. Rec., (466), 163–178.
11.
Tabatabaie, A. M., and Barenberg, E. J. (1978). “Finite element analysis of jointed or cracked concrete pavements.” Transp. Res. Rec., (671), 1978, 11–19.
12.
Taheri, M. R. (1986). “Dynamic response of plates to moving loads: Structure impedance and finite element methods,” Ph.D. thesis, Purdue University, West Lafayette, Ind.
13.
Teller, L. W., and Sutherland, E. C. (1935). “The structural design of concrete pavements.” Public Roads, 16, 145–158, 169–197, 201–221.
14.
Ting, E. C., Genin, J., and Ginsberg, J. H. (1974). “A general algorithm for the moving mass problem.” J. Sound Vibration, 33(1), 49–58.
15.
Westergaard, H. M. (1925). “Computation of stresses in concrete roads.” Highw. Res. Board Proc., 5(1), 90–112.
16.
Westergaard, H. M. (1939). “Stresses in concrete runways of airports.” Highw. Res. Board Proc., 19, 197–202.
17.
Westergaard, H. M. (1948). “New formulas for stresses in concrete pavements.” Trans., ASCE, 113, 425–444.
18.
Zienkiewicz, O. C., and Cheung, Y. K. (1964). “The finite element method for analysis of elastic isotropic and orthotropic slabs.” Proc., The Institution of Civil Engineers, 28, Aug., 471–488.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: May 1, 1992
Published in print: May 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.