Optimum Geometries for Pier‐Type Airport Terminals
Publication: Journal of Transportation Engineering
Volume 118, Issue 2
Abstract
A quantitative methodology to select a suitable terminal geometry for a pier‐type airport terminal is presented. Given the size of a terminal in terms of aircraft gates, the geometry that minimizes the passenger walking distance is obtained based on: the fraction of arriving‐departing and transferring (hub and nonhub) passengers; gate spacing; and spacing between piers. The passenger walking distance is considered as the selection criterion as it is the major level of service factor that is affected by the terminal geometry. A continuum approximation is used to model passenger walking within piers. Walking distances between piers is modeled using discrete methods. It is shown that the optimum geometry for a centralized‐radial pier configuration consists of a set of uniform pier lengths. For centralized parallel and semicentralized configurations it consists of a set of nonuniform pier lengths. The optimum number of piers is nearly proportional to the square root of the total number of gates. The probability distribution of the walking distance of a passenger can be generated by simulation. Several statistical parameters that are suitable to choose the best configuration, given the optimum geometry for each configuration, are reported.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Airports International. (1984). Thomas Telford House, London, United Kingdom, Dec., 16–17.
2.
Airports International. (1985). Thomas Telford House, London, United Kingdom, Jan., 11–12.
3.
Airports International. (1989). Thomas Telford House, London, United Kingdom, Mar., 16.
4.
“Airport terminals reference manual.” (1978). International Air Transport Association, Montreal, Canada.
5.
Bandara, J. M. S. J. (1989). “Airport terminals—optimum configurations and gate position requirement,” dissertation presented to the University of Calgary, at Calgary, Alberta, Canada, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
6.
Bandara, S., and Wirasinghe, S. C. (1992). “Walking Distance Minimization for Airport Terminal Configurations.” Transp. Res.‐A, 26–1 (in press).
7.
de Neufville, R. (1976). Airport system planning. M.I.T. Press, Cambridge, Mass.
8.
de Neufville, R., and Rusconi‐Clerici, J. (1978). “Designing airport terminals for transfer passengers.” J. Trans. Engrg., ASCE, 104, 775–787.
9.
Hart, W. (1985). Airport passenger terminal. John Wiley and Sons, Inc., New York, N.Y.
10.
Horonjeff, R. (1975). Planning and design of airports, 2nd Ed., McGraw‐Hill, New York, N.Y.
11.
Robuste, F. (1991). “Centralized hub terminal geometric concepts; 1: walking distance.” J. Transp. Engrg., ASCE, 117, 143–158.
12.
Stark, R. M., and Nicholls, L. (1972). Mathematical foundations for design: civil engineering systems. McGraw‐Hill, New York, N.Y.
13.
“The apron terminal complex; analysis of concepts for evaluation of terminal buildings.” (1973). Report No. FAA‐RD‐73‐82, Nat. Tech. Information Service, Springfield, Va.
14.
Wirasinghe, S. C. (1988). “Approximate continuous modelling of passenger walking distance in airport terminals.” Proc. EURO IX TIMS XXVIII.
15.
Wirasinghe, S. C., Bandara, J. M. S. J., and Lee, F. (1985). “Airport terminal planning, gate positions and configurations.” Res. Report No. CE 85‐16, Dept. of Civ. Engrg., Univ. of Calgary, Calgary, Alberta, Canada.
16.
Wirasinghe, S. C., Bandara, S., and Vandebona, U. (1987). “Airport terminal geometries for minimal walking distances.” Transportation and Traffic Theory, N. H. Gartner and H. M. Wilson, eds., Elsevier Sci. Publishing Co., Inc., New York, N.Y., 483–502.
17.
Wirasinghe, S. C., and Vandebona, U. (1988). “Passenger walking distance distribution in single and dual concourse centralized airport terminals.” Transp. Res. Rec. 1147.
18.
Zugustin, V. L. (1961). Handbook of numerical methods for the solution of algebraic and transcendental equations. Pergamon Press, New York, N.Y.
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 118 • Issue 2 • March 1992
Pages: 187 - 206
Copyright
Copyright © 1992 ASCE.
History
Published online: Mar 1, 1992
Published in print: Mar 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.