Road Aggregate Choice Based on Silicate Quality and Bitumen Adhesion
Publication: Journal of Transportation Engineering
Volume 118, Issue 1
Abstract
An adsorption mechanism of bitumen onto the silicate surface is presented. Amines are capable of acting as adhesion agents on siliceous surfaces and the carboxylic acids on carbonate stones. An acid adsorbate, tall‐oil pitch is shown to be a very durable adsorbate also on the silicate surface. The pitch is mixed with bitumen of 10–20% by weight. Surface energy and the polar and dispersive components of 34 Finnish silicates are measured. The oxides of Si, Al, Na, K, Ca, Mg, and Fe in silicates are tested with an X‐ray fluorescence spectrophotometer. The adhesion of the silicates to bitumen is estimated. The correlations between the polarity of the silicates and the adhesion are calculated. The increase in the silica dioxide content causes an increase in the polarity of the stone surface and the adhesion is decreased. When the surface is enriched in Mg, the surface is less polar and the adhesion is improved. Silicates containing a lot of Na, K, Si, and Al were poorer in their adhesion onto bitumen.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Dibenedetto, A. T. (1970). “General concepts of adhesion.” Hwy. Res. Board No. 340, Nat. Res. Council, Washington, D.C., 1–12.
2.
Dybalski, J. N. (1982). “Cationic surfactants in asphalt adhesion.” Proc., Association of Asphalt Paving Technologists (AAPT), Vol. 51, 293–297.
3.
Ensley, E. K. (1975). “Multilayer adsorption with molecular orientation of asphalt on mineral aggregate and other substrates.” J. Appl. Chem. Biotech., 25, 671–682.
4.
Ensley, E. K. (1973). “A study of asphalt‐aggregate interactions and asphalt molecular interactions by microcalorimetric methods: Postulated interaction mechanism.” J. Inst. of Petroleum, 59, 279–289.
5.
Erdman, J. G. (1965). “The molecular complex comprising heavy petroleum fractions.” ASTM STP 389, American Society for Testing and materials (ASTM), Philadelphia, Pa., 259–300.
6.
Hair, M. L. (1967). Infrared spectroscopy in surface chemistry. Dekker, New York, N.Y., 79–139.
7.
Huges, R. I., Lamb, D. R., and Pordes, O. (1960). “Adhesion in bitumen macadam.” J. Appl. Chem., 10, 433–443.
8.
Iler, R. K. (1979). The chemistry of silica. Solubility, polymerization, colloid and surface properties and biochemistry. John Wiley and Sons, New York, N.Y., 626–711.
9.
Kaelble, D. H. (1971). Physical chemistry of adhesion. Wiley Interscience, New York, N.Y., 149–159.
10.
Marshall, K., and Rochester, C. H. (1975). “Infrared study of the adsorption of oleic and linoleic acids onto the surface of silica immersed in carbon tetrachloride.” J. Chem. Soc., Faraday Trans. 1, 71, 1954–1971.
11.
Peltonen, P. V. (1989a). “Finnish experience in tall oil pitch as asphalt substitute.” Naval Stores Review, (5), 10–12.
12.
Peltonen, P. V. (1989b). “Research into the physico‐chemistry of tall oil pitch modified asphalt composites.” TAPPI Proc., Int. Symp. on Woodand Pulp. Chemistry, North Carolina State Univ., Raleigh, N.C., 391–398.
13.
Pfeiffer, J. P., and Saal, R. N. (1939). “Asphaltic bitumen as colloid system.” 16th Colloid Symp., Stanford Univ., Stanford, Calif., 139–148.
14.
Petersen, J. C., Barbour, R. V., and Dorrence, F. A. (1971). “Molecularinteractions in asphalt. Tentative identification of 2‐quinolones in asphalt and their interaction with carboxylic acids present.” Anal. Chem., 43, 1491–1495.
15.
Petersen, J. C., and Plancher, H. (1981). “Quantitative determination of carboxylic acids and their salts and anhydrides in asphalts by selective chemical reactions and differential infrared spectroscopy.” Anal. Chem., 53, 786–789.
16.
Plancher, H., Dorrence, S. M., and Petersen, J. C. (1977). “Identification of chemical types in asphalts strongly adsorbed at the asphalt‐aggregate interface and their relative displacement by water.” Proc., Assoc., of Asphalt Paving Technologists (AAPT), 46, 151–175.
17.
Ponahlo, J., and Lengauer, C. (1984). Haftmecanismus Bitumen‐Mineral (in German), Bundesministerium für Bauton und Tecnic, Strassenforschung, Vienna, Austria, 239, 90–99.
18.
Schilling, P., and Schreuders, H. H. (1988). “Improved quickset slurry seal emul‐sifiers with tall oil derivatives.” Transp. Res. Record 1171, Nat. Res. Council, Washington, D.C., 98–107.
19.
Tanabe, K. (1970). Solid acids and bases. Their catalytic properties. Academic Press, Tokyo, Japan, 48–63.
20.
Yen, T. F. (1974). “Structure of petroleum asphaltene and its significance.” Energy Sources, (1), 447–461.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Jan 1, 1992
Published in print: Jan 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.