and Its Variation with Depth
Publication: Journal of Transportation Engineering
Volume 113, Issue 5
Abstract
The modulus of soil reaction, characterizes the stiffness of soil backfill placed at the sides of buried flexible pipelines for the purpose of evaluation deflection caused by the weight of backfill above the pipe. In this study, the nature of is investigated in detail to determine whether its magnitude increases with increasing depth of embedment. The development of in the literature is reviewed, and data from field installations are presented to establish that can be shown to increase with depth on the basis of previous research. Analytical methods, based on elastic theory and finite element techniques, are also used to demonstrate the dependence of on depth. Design values of which vary with depth, are presented, together with recommendations regarding the use of in the Iowa formula.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Adrian, G. W., “Steel Pipe Design for the Second Los Angeles Aqueduct,” Journal of the Pipeline Division, ASCE, vol. 93, No. 3, Nov., 1967, pp. 33–43.
2.
Allgood, J. F., and Takashi, H., “Balanced Design and Finite Element Analysis of Culverts,” Highway Research Record No. 413, 1972, Washington, D.C., pp. 44–56.
3.
Audibert, J. M. E., and Nyman, K. J., “Soil Restraint against Horizontal Motion of Pipes,” Journal of the Geotechnical Engineering Division, ASCE, Vol. 103, No. 10, Oct., 1977, pp. 1119–1142.
4.
Boden, J. B., Farrar, D. M., and Young, O. C., “Standards of Site Practice—Implications for Innovation in the Design and Construction of Buried Pipelines,” TRRL Supplementary Report 345, Berkshire, England, 1977.
5.
Braune, G. M., Cain, W., and Janda, H. F., “Earth Pressure Experiments on Culvert Pipe,” Public Roads, Vol. 10, Nov., 1929, pp. 153–176.
6.
Burns, J. O., and Richard, R. M., “Attenuation of Stresses for Buried Cylinders,” Proceedings, Symposium on Soil‐Structure Interaction, University of Arizona, Tucson, Ariz., 1964, pp. 378–392.
7.
Cates, W. H., “Design of Flexible Steel Pipe under External Loads,” Journal of the Pipeline Division, ASCE, Vol. 90, No. 1, Jan., 1964, pp. 21–31.
8.
Chambers, R. F., McGrath, T. J., and Heger, F. J., “Plastic Pipe for Subsurface Drainage of Transportation Facilities,” NCHRP Report 225, Transportation Research Board, Washington, D.C., Oct., 1980, pp. 122–140.
9.
Duncan, J. M., et al., “Strength, Stress‐Strain and Bulk Modulus Parameters for Finite Element Analyses of Stresses and Movements in Soil Masses,” Report No. UCB/GT/80‐01, University of California, Berkeley, Calif., 1980.
10.
Howard, A. K., “Laboratory Load Tests on Buried Flexible Pipe,” Journal of the AWWA, Vol. 64, No. 10, Oct., 1972, pp. 655–662.
11.
Howard, A. K., “Modulus of Soil Reaction Values for Buried Flexible Pipe,” Engineering and Research Center, Bureau of Reclamation, Denver, Colo., 1976.
12.
Howard, A. K., and Selander, C. E., “Laboratory Load Tests on Buried Reinforced Thermosetting, Thermoplastic, and Steel Pipe,” Journal of the AWWA, Vol. 66, No. 9, Sep., 1974, pp. 540–552.
13.
Kay, J. N., and Abel, J. F., “Design Approach for Circular Buried Conduits,” Transportation Research Record No. 616, Transportation Research Board, 1976, Washington, D.C., pp. 78–80.
14.
Krizek, R. J., and Kay, J. N., “Material Properties Affecting Soil‐Structure Interaction of Underground Culverts,” Highway Research Board, No. 413, Washington, D.C., 1972, pp. 12–29.
15.
Krizek, R. J., et al., “Structural Analysis and Design of Pipe Culverts,” Report No. 116, National Cooperative Highway Research Program, Highway Research Board, 1971, Washington, D.C., 155 pp.
16.
Luscher, U., “Buckling of Soil‐Surrounded Tubes,” Journal of the Soil Mechanics and Foundation Division, ASCE, Vol. 92, No. 6, Nov., 1966, pp. 211–228.
17.
Meyerhof, G. G., “Composite Design of Shallow‐Buried Steel Structures,” Proc., 47th Annual Convention of the Canadian Good Roads Association, Sep., 1966, Halifax, Nova Scotia.
18.
Nielson, F. D., “Modulus of Soil Reaction as Determined from Triaxial Shear Test,” Highway Research Record No. 185, 1967, Washington, D.C., pp. 80–90.
19.
Parmalee, R. A., and Corotis, R. B., “The Iowa Deflection Formula: An Appraisal,” Highway Research Record No. 413, 1972, Washington, D.C., pp. 89–101.
20.
Shafer, G. E., “Discussion: Underground Conduits—An Appraisal of Modern Research,” Trans., ASCE, Vol. 113, 1948, pp. 354–363.
21.
Spangler, M. G., “The Structural Design of Flexible Pipe Culverts,” Bulletin 153, Iowa Engineering Experiment Station, Ames, Iowa, 1941.
22.
Spangler, M. G., “Discussion: Rebuilt Wolf Creek Culvert Behavior,” Highway Research Record, No. 262, Highway Research Board, Washington, D.C., 1969, pp. 10–13.
23.
Stankowski, S., and Nielson, F. D., “An Analytical‐Experimental Study of Underground Structural Cylinder Systems,” Engineering Experiment Station, New Mexico State University, Las Cruces, N. Mex., Oct., 1969.
24.
Steel Pipe—Design and Installation, American Water Works Association, Steel Pipe Manual M11, 1964.
25.
Terzaghi, K., “Evolution of Coefficients of Subgrade Reaction,” Geotechnique, London, Vol. 5, No. 4, 1955, pp. 297–326.
26.
Watkins, R. K., “Influence of Soil Characteristics on the Deformation of Embedded Flexible Pipe Culverts,” Bulletin 223, Highway Research Board, Washington, D.C., 1959, pp. 14–24.
27.
Watkins, R. K., “Structural Design of Buried Circular Conduits,” Highway Research Record No. 145, Washington, D.C., 1966, pp. 1–16.
28.
Watkins, R. K., and Nielson, F. D., “Development and Use of the Modpares Device,” Journal of the Pipeline Division, ASCE, Vol. 90, No. 1, Jan., 1964, pp. 155–178.
29.
Watkins, R. K., and Spangler, M. G., “Some Characteristics of the Modulus of Passive Resistance of Soil: A Study in Similitude,” Proc., Highway Research Board, Vol. 37, 1958, pp. 576–583.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Sep 1, 1987
Published in print: Sep 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.