Prediction of Bridge Accident Rates
Publication: Journal of Transportation Engineering
Volume 110, Issue 1
Abstract
A technique is developed to predict bridge accidents. These collisions are complex occurrances influenced by many factors. Previous research found as many as ten items contribute to a structure's potential for collisions. Four years of Texas data (1,000,000 accidents, 29,000 bridges and 100,000 roadway segments) were merged and searched for rural, two‐lane, two‐way bridge accidents. Screening and classification measures were used to purify the data leaving a uniform study sample of 2,849 cases for analysis. The relationship between accidents and predictor variables was investigated by manual, correlation, and regression analyses. The most important variables were: (1) Bridge relative width (bridge minus road); (2) average daily traffic (ADT); and (3) approach roadway width. Regression curves were developed to predict accidents using these factors as independent variables. A probability table was developed to predict accidents. Combinations of approach roadway width and bridge relative width indicate collision rate. Rates may be combined with ADT for particular structures to develop expected accidents per year. The statistical measures for effectiveness were very strong, indicating that the table is a good way to predict bridge accidents.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Bridge Width Study for Arizona Interstate System,” Arizona Department of Transportation, Phoenix, Ariz., Mar., 1978.
2.
Brown, J. V., and Foster, J., “Bridge Accidents on Rural Highways in New Zealand: Analysis and Appraisal,” Australian Road Research, 1966, pp. 638–646.
3.
“Cost and Safety Effectiveness of Highway Design Elements,” NCHRP Report 197, Transportation Research Board, Washington, D.C., 1978, pp. 83–84.
4.
“Evaluation of Criteria for Safety Improvements,” Roy Jorgensen & Associates, Chicago, Ill., 1966, pp. 151–152 and 194–200.
5.
Gunnerson, H. E., “Narrow Bridge Study,” Iowa State Highway Commission, Ames, Iowa, Feb., 1961.
6.
Hilton, M. H., “Some Case Studies of Highway Bridges Involved in Accidents,” Highway Research Record 432, 1973, pp. 41–44.
7.
Rollins, J. B., “Cost Effectiveness Analysis and Highway Safety,” Texas Transportation Researcher, Vol. 16, No. 1, Texas Transportation Institute, College Station, Tex., June, 1980.
8.
Rowan, N. J., et al., “Cross Section: Narrow Bridge Treatments,” Safety Design and Operational Practices for Streets and Highways, Texas Transportation Institute, College Station, Tex., 1978, pp. 5.3.1–5.3.7.
9.
“A Study of Motor Vehicle Traffic Accidents at Bridges on the Colorado State Highway System,” Traffic Engineering Section, Colorado Division of Highways, Denver, Colo., June, 1973.
10.
Walton, N. E., et al., “Safety at Narrow Bridge Sites,” NCHRP Report 203, Transportation Research Board, Washington, D.C., 1979.
11.
Williams, S. J., and Fritts, C. E., “Let's Build Safety Into Our Highways,” Public Safety, May, 1955, pp. 22–23.
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 110 • Issue 1 • January 1984
Pages: 45 - 54
Copyright
Copyright © 1984 ASCE.
History
Published online: Jan 1, 1984
Published in print: Jan 1984
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.