T-Cleat Connections to Concrete-Filled Tubular Internal Columns
Publication: Journal of Structural Engineering
Volume 130, Issue 5
Abstract
Tests have been carried out on four full-scale composite connection specimens. The specimens were made by connecting two unsymmetrically loaded steel beams to concrete-filled rectangular hollow section tubular columns. The columns were hence subjected to axial loading and bending moments, and thus represented internal columns in multistory buildings. Columns and beam loads were increased proportionately up to failure, and both column and connection behavior were observed and recorded. The experimental failure loads and column behavior are compared against the predictions of a three-dimensional finite-element (FE) model, using a general purpose FE software.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ammermann, D., and Leon, R. T.(1987). “Behavior of semi-rigid composite connections.” J. Struct. Eng., 113(8), 1165–1174.
British Standards Institution (BSI). (1979). “Steel, concrete and composite Bridges.” Code of practice for the design of composite bridges, BS 5400, Part 5, London.
British Standards Institution (BSI). (1985). “Structural use of steel work in building.” Code of practice for design in simple and continuous construction: Hot rolled sections, BS 5950, Part 1, London.
Davison, J. B. (1987). “Strength of beam-columns in flexibly connected steel frames.” PhD thesis, Dept. of Civil and Structural Engineering, Univ. of Sheffield, Sheffield, U.K.
Hibbitt, Karlson, and Sorenson. (2002) ABAQUS user manual, Version 6.2, Part 1 & 2, Hibbitt, Karlson and Sorenson, Inc.
Owens, G. W., and Echeta, C. B. (1981). “A semi-rigid design method for composite frames.” Proc., Int. Conf. on Joints in Structural Steelwork, London, 233–241.
Shakir-Khalil, H. (1993a). “Full-scale tests on composite connections.” Composite Construction in Steel and Concrete II, ASCE, New York, 539–554.
Shakir-Khalil, H. (1993b).“Connection of steel beams to concrete-filled tubes.” 5th Int. Symp. on Tubular Structures, Nottingham, England, U.K., 5-ISTS, 195–203.
Shakir-Khalil, H. (1994a). “Finplate connections to concrete-filled tubes.” 4th Int. Conf. on Steel-Concrete Composite Structure, Kosice, Slovakia, ICCS-4, 181–185.
Shakir-Khalil, H. (1994b). “Beam connection to concrete-filled tubes.” 6th Int. Symp. on Tubular Structures, Monash, Australia, 6-ISTS, 357–364.
Shakir-Khalil, H., and Al-Rodan, A. (1995). “Behaviour of concrete-filled edge columns.” 3rd Int. Conf. on Steel and Aluminum Structures, ICSAS ’95, Istanbul, Turkey, 515–522.
Shakir-Khalil, H., and Al-Rodan A. (1996). “Experimental behavior and numerical modeling of concrete-filled rectangular hollow section tubular columns.” Composite Construction III Conf., Irsee, Germany, 267–278.
Van Dalen, K., and Godoy, H.(1982). “Strength and rotational behavior of composite beam to column connections.” Can. J. Civ. Eng.9, 313–322.
Wang, Y. C., and Nethercot, D. A.(1988). “Ultimate strength analysis of three-dimensional column subassemblages with flexible connections.” J. Constr. Steel Res., 9(4), 235–264.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Oct 7, 2002
Accepted: Feb 4, 2003
Published online: Apr 15, 2004
Published in print: May 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.