Discussion of “General Issues Influencing Connection Performance” by Charles W. Roeder
This article is a reply.
VIEW THE ORIGINAL ARTICLEThis article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 129, Issue 6
Get full access to this article
View all available purchase options and get full access to this article.
References
Allen, J., Partridge, J. E., and Richard, R. M. (1995). “Ductile connection designs for welded steel moment frames.” Proc., 1995 Structural Engineers Assoc. of California Conf., Indian Wells, Calif.
Abel, J. F., and Popov, E. P. (1968). “Static and dynamic finite element analysis of sandwich structures.” Air Force Flight Dynamics Laboratory T.R. No. 68-150, 213–245.
Applied Technology Council. (1992). Guidelines for cyclic seismic testing of components of steel structures, 13 and 35–36.
Barsom, J. M., and Pellegrino, J. V., Jr. (2000a). “Failure analysis of welded beam-to-column connections.” I: Unreinforced post-Northridge welded steel moment frame connections, SAC Steel Project-Task 7.1.3, SAC Joint Venture, Richmond, Calif.
Barsom, J. M., and Pellegrino, J. V., Jr. (2000b). “Failure analysis of welded beam-to-column connections.” II: Unreinforced post-Northridge welded steel moment frame connections, SAC Steel Project-Task 7.1.3, SAC, Joint Venture, Richmond, Calif.
Barsom, J. M. (2000). “Development of fracture toughness requirements for weld metals in seismic applications.” SAC Steel Project-Task 7.1.3, SAC Joint Venture, Richmond, Calif.
Barsom, J. M., and Pellegrino, J. V.(2002). “Failure analysis of welded beam-to-column connections.” J. Mater. Civ. Eng., 14(1), 24–34.
Barsom, J. M.(2002). “Development of fracture toughness requirements for weld metals in seismic applications.” J. Mater. Civ. Eng., 14(1), 44–49.
Chi, W. M., Deierlein, G. C., and Ingraffea, A.(2000). “Fracture toughness demands in welded beam-column moment connections.” J. Struct. Eng., 126(1), 88–97.
Dexter, R. J., Bergson, P. M., Ojard, S. D., and Graeser, M. D.(2002). “Ductility and strength requirements for base metal in welded T-joints.” J. Mater. Civ. Eng., 14(1), 35–43.
El-Tawil, S., Mikesell, T., Vidarsson, E., and Kunnath, S. K. (1998). “Strength and ductility of FR welded-bolted connections.” Rep. No. SAC/BD-98/01, SAC Joint Venture, Sacramento, Calif.
Fry, G. T. (2000). “Supplemental analysis and testing of reduced beam section components.” SAC Steel Project-Task 7.06, SAC Joint Venture, Richmond, Calif.
Goel, S. C. et al. (1999). “Parametric tests on unreinforced connections.” SAC STEEL Project-Task 7.023, SAC Joint Venture, Richmond, Calif.
Kaufman, E. J., and Fisher, J. W. (1995). “A study of the effects of material and welding factors on moment frame weld joint performance using a small scale tension specimen.” SAC Tech. Rep. No. 95-8, paper 2, SAC Joint Venture, Richmond, Calif.
Krawinkler, H., Zohrei, M., Lashkari-Irvani, B., Cofie, N. G., and Hadidi-Tamjed, H. (1983). “Recommendations for experimental studies on the seismic behavior of steel components and materials.” The John A. Blume Earthquake Engineering Center, Dept. of Civil Eng., Standford Univ., Rep. No. 61, September.
Kuwamura, H., and Suzuki, T.(1997). “Ductile crack as trigger of brittle fracture in steel.” J. Struct. Eng., 123(6), 729–735.
Mahin, S. (2000). “Why it happened.” New Recommended Seismic Design Criteria for Steel Moment-Frame Buildings: Speaker’s Slides, SAC Regional Training Seminar, 3.6–7.
Malley, J. (2000). “Parameters contributing to the improved performance.” New Recommended Seismic Design Criteria for Steel Moment-Frame Buildings: Speaker’s Slides, SAC Regional Training Seminar, 5–19.
Mohr, W. C. (1999). “Weld acceptance criteria for seismically loaded welded connections.” SAC Background Document SAC/BD-99/24, SAC Joint Venture, Richmond, Calif.
Mohr, W.(2002). “Weld acceptance criteria for seismically loaded steel structures.” J. Mater. Civ. Eng., 14(1), 50–56.
Partridge, J. E., Paterson, S., and Richard, R. M. (2000). “Low cycle fatigue tests and fracture analyses of bolted-welded seismic moment frame connections.” Proc., STESSA 2000 Conf. Behavior of Steel Structures in Seismic Areas, Montreal, August 2000.
Richard, R. M., Partridge, J. E., and Allen, J. (1997). “Proprietary slotted beam connection designs.” Modern Steel Constr., 28–33.
Richard, R. M., and Radau, R. E. (1998). “Force, stress, and strain distributions in FR bolted-welded connections.” Proc., ’98 Structural Eng. World Congr., Technical Paper T199-3.
Richard, R. M., Partridge, J. E., and Allen, J. (2001), “Accumulated seismic connection damage based upon full scale low cycle fatigue connection tests.” Proc., Structural Eng. Assoc. of Calif. 70th Annual Convention, September 27–29, 43–48.
Ricles, J. M. (2000). “Supplemental testing of unreinforced connections with integration of T-stub weld tests and analysis.” SAC Steel Project-Task 7.05, SAC Joint Venture, Richmond, Calif.
Roeder, C. W.(2002). “Connection performance for seismic design of steel moment frames.” J. Struct. Eng., 128(4), 517–525.
Popov, E. P., and Stevens, R. M. (1970), “Cyclic loading of full size steel connections.” EERC Rep. No. 70-3, Univ. of California, Berkeley, Calif.
Yu, Y. Y.(1959). “A new theory of elastic sandwich plates—One-dimensional case.” J. Appl. Mech., 26(3), 415–423.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Published online: May 15, 2003
Published in print: Jun 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.