Adjustable Tensegrity Structures
Publication: Journal of Structural Engineering
Volume 129, Issue 4
Abstract
A tensegrity is a lightweight space structure consisting of compression members surrounded by a network of tension members. They can be easily dismantled and therefore provide innovative possibilities for reusable and modular structures. Tensegrities can adapt their shape by changing their self stress, and when equipped with sensors and actuators, they can adapt to changing environments. A full-scale prototype of an adjustable tensegrity has been built and tested at Swiss Federal Institute of Technology (EPFL). This paper begins with a description of important aspects of the design, assembly, and static testing. Tests show that the structure behaves linearly when subjected to vertical loads applied to a single joint. Nonlinearities are detected for small displacements, for loads applied to several joints and for adjusting combinations of telescoping compression members. To predict behavior, dynamic relaxation—a nonlinear method—has been found to be reliable. Appropriate strut adjustments found by a stochastic search algorithm are identified for the control goal of constant roof slope and for the load conditions studied. When adjusting struts, an excessive number of adjustable members does not necessarily lead to improved performance.
Get full access to this article
View all available purchase options and get full access to this article.
References
Barnes, M. R. (1977). “Formfinding and analysis of tension space structures by dynamic relaxation.” PhD thesis, The City University Press, London.
Baumann, F., Fest, E., and Smith, I. F. C. (2000). “Développement d’un système de mesure pour evaluer la tension dans les ca⁁bles du tensegrité.” Internal Rep., Swiss Federal Institute of Technology, Lausanne, Switzerland, 15 (in French).
Calladine, C. R.(1978). “Buckminster Fuller’s ‘Tensegrity’ structures and Clerk Maxwell’s rules for the construction of stiff frames.” Int. J. Solids Struct., 14, 12–17.
Casas, J.-R.(1994). “A combined method for measuring cable forces: the cable-stayed Alamillo Bridge.” Struct. Eng. Int. (IABSE, Zurich, Switzerland),4, 235–240.
Crosnier, B., and Cevaer, F. (1997). “Le noeud problème.” Systèmes de Tensegrité, Edition de l’Esperou, Montpellier, France, 31–35 (in French).
Cunha, A., and Caetano, E.(1999). “Dynamic measurements on stay cables of cable-stayed bridges using an interferometry laser system.” Exp. Tech., 23(3), 38–43.
Djouadi, S. (1998). “Le contro⁁le des structures tensegrité et les systèmes tensegrité.” Doctoral thesis, Univ. Montpellier II, Montpellier, France, 134 (in French).
Dowsland, K. (1995). “Simulated annealing.” Modern heuristic techniques for combinatorial problems, C. Reeves, ed., McGraw-Hill, New York, 20–69.
Emmerich, D. G. (1964). “Construction de réseaux autotendants.” French Patent N°1,377,290 (in French).
Hanaor, A.(1988). “Prestressed pin-jointed structures—flexibility analysis and prestress design.” Comput. Struct., 28, 757–769.
Hustin, S. (1988). “A new standard cell placement program based on the simulated annealing algorithm.” Masters of Science, Univ. of California, Berkeley, Calif.
Ingber, D. E. (1998). “The architecture of life.” Sci. Am., January, 30–39.
Kirpatrick, S., Gelatt, C. D., and Vecchi, P.(1983). “Optimization by simulated annealing.” Science, 20, 671–680.
Marguccio, D., Fest, E., and Smith, I. F. C. (2000). “Etude de la conséquence de chocs sur les barres en fiberline montées dans les structures tensegrités.” Internal Rep., Swiss Federal Institute of Technology, Lausanne, Switzerland, 15 (in French).
Motro, R.(1992). “Tensegrity systems: state of the art.” Int. J. Space Struct., 7(2), 75–83.
Motro, R. (1997). “Tensegrity systems and structural research.” Current and emerging technologies of shell and spatial structures, Proc., Int. Association for Shell and Spatial Structures (IASS), Madrid, Spain, J. Abel, R. Astudillo, and N. K. Srivastava, 161–173.
Motro, R., and Raducanu, V. (2001). “Tensegrity systems and tensile structures.” Extended Abstracts International Symposium on Theory, Design and Realization of Shell and Spatial Structures, H. Kunieda, ed., Nagoya, Japan, 314–315.
Papadrakakis, M.(1981). “A method for the automatic evaluation of dynamic relaxation parameters.” Comput. Methods Appl. Mech. Eng., 25, 35–48.
Pedretti, M. (1998). 〈http://www.ppeng.ch/base_expo.htm〉, (July 15, 2001), Passera and Pedretti—Consulting Engineering, Switzerland.
Pellegrino, S.(1992). “A class of tensegrity domes.” Int. J. Space Struct., 7(2), 127–142.
Pellegrino, S., and Calladine, C. R.(1986). “Matrix analysis of statically and kinematically indeterminate frameworks.” Int. J. Solids Struct., 22(4), 409–428.
Picon, A. (1997). L’art de l’ingénieur, Ed. du Centre Pompidou, Paris, 264 (in French).
Robbin, J. L. (1996)., Engineering a new architecture, Yale Univ. Press, Princeton, N.J., 25–37.
Rossier, S. (1993). “Optimization of cable structures using genetic algorithms.” Internal Rep., Swiss Federal Institute of Technology, Lausanne, Switzerland.
Salama, M., Umland, J., Bruno, R., and Garba, J.(1993). “Shape adjustment of precision truss structures: analytical and experimental validation.” Smart Mater. Struct., 2, 240–248.
Shea, K., Fest, E., and Smith, I. F. C.(2002). “Developing intelligent tensegrity structures with stochastic search.” Advanced engineering informatics, Vol. 16(2), Elsevier, New York, 21–40.
Shea, K., and Smith, I. (1998). “Intelligent structures: A new direction in structural control.” Artificial intelligence in structural engineering, LNAI 1454, Computer Science, Springer, Heidelberg, 1998, 398–410.
Skelton, R. E., Pinaud, J. P., and Mingori, D. L.(2001). “Dynamics of the shell class of tensegrity structures.” J. Franklin Inst., 338, 255–338.
Snelson, K. (1998). 〈http://www.grunch.net/snelson/〉, (Aug. 15, 2001).
Sultan, C. (1999). “Modeling, design and control tensegrity structures with applications.” PhD thesis, Purdue Univ., West Lafayette, Ind.
Swartz, W., and Sechen, C. (1990). “New algorithms for the placement and routing of macro cells.” Proc., IEEE Conf. on Computer-Aided Design, Santa Clara, Calif., 336–339.
Tibert, G. (2002). “Deployable tensegrity structures for space applications.” Doctoral thesis, Royal Institute of Technology, Stockholm, Sweden.
Vassart, N., Laporte, R., and Motro, R.(2000). “Determination of mechanism’s order for kinematically and statically indetermined systems.” Int. J. Solids Struct., 37, 3807–3839.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Sep 27, 2001
Accepted: Nov 26, 2002
Published online: Mar 14, 2003
Published in print: Apr 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.