Seismic Response of Composite Moment-Resisting Connections. II: Behavior
Publication: Journal of Structural Engineering
Volume 124, Issue 8
Abstract
This two-part paper presents research to determine the effect of structural phenomena, especially the presence of composite concrete floor slabs, on the behavior of the type of fully-restrained, steel moment-resisting frame connections that failed, primarily near the bottom girder flanges, during the 1994 Northridge, California, earthquake. In a companion paper, the results of three experiments, including one bare steel specimen and two with composite floor slabs, are outlined, along with corroborating analyses. In this paper, the structural phenomena that affected the behavior of these connections are documented. The results indicate that the strains near the bottom flange of the specimens with a slab are several times larger than those near the top flange, and that strain concentrations and a triaxial state of tensile stress precipitate failure in these connection topologies. These results help to explain the predominance of bottom flange failures, and they indicate that the potentially high strain levels leading to fracture and the inherently unsymmetrical topology of composite steel frame connections should be considered in the development of connection design provisions.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Blodgett, O.(1995). “Details to increase ductility in SMRF connections.”The Welding Innovation Quarterly, 12(2), 16–18.
2.
Carlson, P. C., Shield, C. K., and Hajjar, J. F. (1998). “The behavior of earthquake resistant, composite steel moment resisting frame connections.”Struct. Engrg. Rep. No. ST 98-4, Department of Civil Engineering, University of Minnesota, Minneapolis, Minn.
3.
Fisher, J. W., Dexter, R. J., and Kaufmann, E. J. (1995). “Fracture mechanics of welded structural steel connections.”Internal Rep., Center for Advanced Technology for Large Structural Systems, Lehigh University, Bethlehem, Pa.
4.
Goel, S. C., Stojadinovic, B., and Lee, K.-H. (1996). “A new look at steel moment connections.”Res. Rep. No. UMCEE 96-19, Department of Civil and Environmental Engineering, College of Engineering, University of Michigan, Ann Arbor, Mich.
5.
Hajjar, J. F., Leon, R. T., Gustafson, M. A., and Shield, C. K. (1998). “Full-scale cyclic experiments of composite moment-resisting frame connections.”Struct. Engrg. Rep. No. ST 98-02, Department of Civil Engineering, University of Minnesota, Minneapolis, Minn.; Rep. No. SEM 98-02, School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, Ga.
6.
“Interim Guidelines Advisory No. 1: Supplement to FEMA 267,”Rep. No. SAC-96-03 and FEMA-267A, SAC Joint Venture, Sacramento, Calif.
7.
Kaufmann, E., Fisher, J., Lu, L., and Xue, M. (1996). “Achieving ductile behavior of moment connections.”Modern steel construction, AISC, 30–39.
8.
Leon, R. T., Hajjar, J. F., and Shield, C. K. (1997). “The effect of composite floor slabs on the behavior of steel moment-resisting frames in the Northridge earthquake.”Composite construction in steel and concrete III, D. C. Buckner and B. M. Shahrooz, eds., ASCE, Reston, Va., 735–751.
9.
Leon, R. T., Hajjar, J. F., and Gustafson, M. A.(1998). “Seismic response of composite moment-resisting connections. I: Performance.”J. Struct. Engrg., ASCE, 124(8), 868–876.
10.
Load and resistance factor design specification for structural steel buildings. (1993). 2nd Ed., American Institute of Steel Construction, Chicago, Ill.
11.
Tide, R. H. R. (1997). “Experimental verification of “k”-area steel properties after cracking observed.”Innovations in structural design: strength, stability, reliability, J. F. Hajjar and R. T. Leon, eds., Structural Stability Research Council, Bethlehem, Pa., 61–71.
12.
Tide, R. H. R. (1998). “Stability of weld metal subjected to cyclic static and seismic loading.”Engrg. Struct., Special Issue on Innovations in Stability Concepts and Methods for Seismic Des. in Struct. Steel, 20(4-6), 562–569.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Aug 1, 1998
Published in print: Aug 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.