Parameter Estimation of Structures from Static Strain Measurements. I: Formulation
Publication: Journal of Structural Engineering
Volume 122, Issue 5
Abstract
A method for structural parameter identification utilizing elemental strain measurements is presented. By using a subset of applied static forces and a subset of measured strains, element stiffness parameters of all or a portion of a finite element model of the structure are identified. This method preserves the structural connectivity and determines changes in cross-sectional properties at the element level, including large changes or element failures for stable structures. Strain measurements do not require a frame of reference; this makes them superior to static displacement measurements. Strain measurements are also more accurate than ordinary displacement measurements and can easily be used on bridges, buildings, and space structures. The identified cross-sectional element properties can be used for damage assessment and load rating of structures. Two numerical examples, including two-dimensional (2D) truss and frame structures, are presented and the element stiffnesses are successfully and accurately evaluated.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Aktan, A. E., Chuntavan, C., Toksoy, T., and Lee, K. L. (1993). “Structural identification of a steel-stringer bridge for nondestructive evaluation.”Transp. Res. Rec. 1393, Transp. Res. Board, Washington, D.C.
2.
Banan, Mo. R., Banan, Ma. R., and Hjelmstad, K. D. (1994). “Parameter estimation of structures from static response. I: Computational aspects.”J. Struct. Engrg., 120(11), ASCE, 3243–3258.
3.
Bruno, R. J. (1994). “Identification of nonlinear joints in a truss structure.”Proc., AIAA/ASME Adaptive Struct. Forum, Am. Inst. of Aeronautics and Astronautics (AIAA), Washington, D.C., 402–410.
4.
Fritzen, C. P., and Zhu, S.(1991). “Updating the finite element models by means of measured information.”Comp. and Struct., 40(2), 475–486.
5.
Gornshteyn, I. (1992). “Parameter identification of structures using optimum modal dynamic measurements,” MS thesis, Tufts Univ., Medford, Mass.
6.
Hajela, P., and Soeiro, F. J.(1990). “Structural damage detection based on static and modal analysis.”AIAA J., 28(9), 1110–1115.
7.
Kabe, A. M.(1985). “Stiffness matrix adjustment using mode data.”AIAA J., 23(9), 1431–1436.
8.
Li, D., Zhung, H., and Wang, B. (1989). “The principle and technique of experimental strain modal analysis.”Proc., 7th IMAC, SEM, Int. Soc. for Optical Engrg., 1285–1289.
9.
Saletnik, M. J. (1993). “Parameter identification using static strain measurements,” MS thesis, Tufts Univ., Medford, Mass.
10.
Sanayei, M., and Nelson, R. B. (1986). “Identification of structural element stiffnesses from incomplete static test data.”Soc. of Automotive Engrs. Tech. Paper Ser., SAE-861793.
11.
Sanayei, M., and Onipede, O.(1991). “Damage assessment of structures using static test data.”AIAA J., 29(7), 1174–1179.
12.
Sanayei, M., and Saletnik, M. J.(1996). “Parameter estimation of structures from static strain measurements. II: Error sensitivity analysis.”J. Struct. Engrg., ASCE, 122(5), 563–572.
13.
Smith, S. W., and Beattie, C. A. (1991). “Optimal identification using modal data.”Proc., SDM Conf., AIAA-91-0948-CP, Am. Inst. of Aeronautics and Astronautics, Washington, D.C., 2319–2324.
14.
Stubbs, N.(1990a). “Global non-destructive damage evaluation in solids.”The Int. J. of Analytical and Experimental Modal Anal., 5(2), 67–79.
15.
Stubbs, N.(1990b). “Global damage detection in solids—experimental verification.”The Int. J. of Analytical and Experimental Modal Anal., 5(2), 81–97.
16.
Yao, G. C., Chang, K. C., and Lee, G. C.(1992). “Damage diagnosis of steel frames using vibrational signature analysis.”J. Engrg. Mech., ASCE, 118(9), 1949–1961.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: May 1, 1996
Published in print: May 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.