Centrifuge Modeling and Analysis of Concrete Gravity Dams
Publication: Journal of Structural Engineering
Volume 121, Issue 10
Abstract
In gravity dams, crack growth is inhibited by gravitational effects; thus, correct model testing can only be accomplished in a centrifuge where the gravitational field is inversely proportional to the scale. Following an overview of centrifugal testing, this paper reports on the first centrifuge testing of concrete gravity dam models. Test results are then contrasted with numerical predictions using fracture-mechanics-based finite-element analysis. The paper concludes with recommendations for further investigation on this new and innovative testing technique.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ayari, M. L., and Saouma, V. E. (1990). “A fracture mechanics based seismic analysis of concrete gravity dams using discrete cracks.”Engrg. Fracture Mech., 35(1).
2.
Beggs, G. E., Davis, R. E., and Davis, H. E. (1993). “Tests on structural models of the proposed San Francisco-Oakland suspension bridge.”Tech. Rep. 2, Univ. of Calif. Publ. in Engrg., Berkley, Calif.
3.
Broek, D. (1986). Elementary engineering fracture mechanics, 4th Ed., Martinus Nijhoff Publishers, Dordrecht, The Netherlands.
4.
Broz, J., Saouma, V. E., Brühwiler, E., and Boggs, H. (1991). “Fracture mechanics experiments in a centrifuge.”Centrifuge-91, H. Y. Ko and F. G. McLean, eds., A. A. Balkema, Rotterdam, The Netherlands, 575–581.
5.
Brühwiler, E., and Saouma, V. E. (1991). “Fracture mechanics analysis of concrete hydraulic structures.”Rep., ETL 1110-8-16(FR), Dept. of the Army, U.S. Army Corps of Engrs., Washington, D.C.
6.
Brühwiler, E., and Saouma, V. E. (1993). “The effect of hydrostatic pressure on the fracture of concrete.”Tech. Rep., Electric Power Res. Inst., Palo Alto, Calif.
7.
Brühwiler, E., and Wittmann, F. H. (1990). “Failure of dam concrete subjected to seismic loading conditions.”Engrg. Fracture Mech., 35(3).
8.
Bucky, P. B., Solakian, A. G., and Baldin, L. S. (1935). “Centrifugal method of testing models.”Civ. Engrg., Vol. 5, 287–290.
9.
Carpinteri, A., Valente, S., Ferrara, G., and Imperato, L. (1992). “Experimental and numerical fracture modelling of a gravity dam.”Fracture mechanics of concrete structures, Elsevier Applied Science, New York, N.Y., 351–361.
10.
Christensen, S. N., and Bagge, G. (1977). “Centrifugal testing on the bearing capacity of circular footings on the surface of sand.” Internal Rep., 20th anniversary of the Danish Engineering Academy, Danish Engrg. Acad., Copenhagen, Denmark.
11.
Erdogan, F., and Sih, G. C. (1963). “On the crack extension in plates under plane loading and transverse shear.”J. Basic Engrg., Vol. 85, 519–527.
12.
Fracture mechanics of concrete structures—from theory to applications, state of the art report, RILEM TC 90-FMA. (1989). L. Elfgren, ed., Chapman & Hall, Ltd., London, England.
13.
Fuglsang, L. D., and Ovesen, N. K. (1988). “The application of the theory of modelling to centrifuge studies.”Centrifuges in soil mechanics, S. C. James, ed., A. A. Balkema, Rotterdam, The Netherlands, 119–138.
14.
Hillerborg, A., Modéer, M., and Petersson, P. E. (1976). “Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements.”Cement and Concrete Res., Vol. 6, 773–782.
15.
Ko, H.-Y. (1988a). “Summary of the state-of-the-art in centrifuge model testing.”Centrifuges in soil mechanics, S. C. James, ed., A. A. Balkema, Rotterdam, The Netherlands, 11–18.
16.
Ko, H.-Y. (1988b). “The colorado centrifuge facility.”Centrifuges in soil mechanics, S. C. James, ed., A. A. Balkema, Rotterdam, The Netherlands, 73–75.
17.
Palmer, A. C., and Rice, J. R. (1973). “The growth of slip surfaces in the progressive failure of over-consolidated clay.”Proc., Royal Soc. of London, Ser. A, Mathematical and Physical Sci., London, England, Vol. 332, 527–548.
18.
Pokrovskii, G. I., and Fiodorov, I. S. (1936). “Studies of soil pressures and deformations by means of a centrifuge.”Proc., 1st Int. Conf. Soil Mech. and Found. Engrg., Vol. 1, 70.
19.
Proceedings, 1st Int. Conf. on Fracture Mech. for Concrete and Concrete Struct. (1992). Z. Bažant, ed., Elsevier, London, England.
20.
Proceedings, Centrifuge 91. (1991a). Ko, H.-Y., and McLean, F. G., eds., A. A. Balkema, Rotterdam, The Netherlands.
21.
Proceedings, Dam Fracture. (1991b). V. E. Saouma, R. Dungar, and D. Morris, eds., Electric Power Res. Inst. (EPRI), Palo Alto, Calif.
22.
Reich, R., Červenka, J., and Saouma, V. E. (1993). “Merlin, a three-dimensional finite element program based on a mixed-iterative solution strategy for problems in elasticity, plasticity, and linear and nonlinear fracture mechanics.”Tech. Rep., Electric Power Res. Inst. (EPRI), Palo Alto, Calif.
23.
Saouma, V. E., Ayari, M. L., and Boggs, H. L. (1987). “Fracture mechanics of concrete gravity dams.”Tech. Rep., Univ. of Colorado, Boulder, Colo.
24.
Saouma, V. E., Brühwiler, E., and Boggs, H. L.(1990). “A review of fracture mechanics applied to concrete dams.”Dam Engrg., 1(1), 41–57.
25.
Schofield, A. N. (1988). “An introduction to centrifuge modelling.”Centrifuges in soil mechanics, W. W. Craig, R. G. James, and A. N. Schofield, eds., A. A. Balkema, Rotterdam, The Netherlands.
26.
Scott, R. (1988). “Physical and numerical models.”Centrifuges in soil mechanics, W. H. Craig, R. G. James, and A. N. Schofield, eds., A. A. Balkema, Rotterdam, The Netherlands.
27.
Scott, R., and Morgan, N. (1977). “Feasibility and desirability of constructing very large centrifuges for geotechnical studies.”Tech. Rep., Calif. Inst. of Technol., Pasadena, Calif.
28.
Takata, T., and Kuribayashi, E.(1961). “Studies on stress analysis for dam by photo elastic method, a large centrifugal type loading apparatus and its application experimental tests.”J. of Res., Public Works Res. Inst., 4(13), 1–24.
29.
Waggoner, F. A., Plizzari, G. A., and Saouma, V. E.(1992). “Centrifuge tests of concrete gravity dams.”Dam Engrg., 4(3), 145–171.
30.
Waggoner, F. A., Saouma, V. E., and Plizzari, G. A. (1993). “Centrifuge modelling and analysis of concrete gravity dams.”Tech. Rep., Electric Power Res. Inst., Palo Alto, Calif.
31.
Yaozhong, Yu. (1991). “Application of fracture mechanics to concrete dams in china.”Struct. and Mech. Rep., Inst. of Water Conservancy and Hydroelectric Power Res. (IWHR), Beijing, China.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Oct 1, 1995
Published in print: Oct 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.