Hysteretic Response of Reinforced‐Concrete Infilled Frames
Publication: Journal of Structural Engineering
Volume 118, Issue 8
Abstract
Strengthening of framed reinforced concrete structures by cast‐in‐place reinforced concrete infills is commonly used in practice. The objective of this study is to investigate the behavior of such infilled frames under seismic loads. For this purpose, 14 two‐story, one‐bay infilled frames are tested under reversed cyclic loading simulating seismic action. The variables investigated are the effect of type of infill reinforcement, the connection between the frame and the infill, and the flexural capacity of columns. Test results are evaluated to estimate the effects of infill on stiffness, strength, energy dissipation, lateral drift, and ductility. The feasibility of different analytical methods is also investigated. The results obtained using such analytical methods are compared with the experimental observations. Using the test results, a simple dynamic evaluation is made to predict the dynamic behavior of infilled frames under seismic action.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Altin, S. (1990). “Strengthening of reinforced concrete frames with reinforced concrete infills,” PhD thesis, Middle East Tech. Univ., Ankara, Turkey.
2.
Brokken, S. T., and Bertero, V. V. (1981). “Studies on effects of infills in seismic resistant reinforced concrete construction.” Report No. UCB/EERC‐81/12, Earthquake Engrg. Res. Ctr., Univ. of California, Berkeley, Calif.
3.
Cardenas, A. E., Hanson, J. M., Corley, W. G., and Hognestad, E. (1973). “Design provision for shear walls.” ACI J., 70(3), 221–230.
4.
Ersoy, U., Altin, S., and Tankut, T. (1990). “Seismic strengthening of R/C frames with R/C infills.” Report No. METU/SML‐90/01, Middle East Tech. Univ., Ankara, Turkey.
5.
Kahn, L. F. (1976). “Reinforced concrete infilled shear walls for aseismic strengthening,” PhD thesis, Univ. of Michigan, Ann Arbor, Mich.
6.
Liauw, T. C., and Kwan, K. H. (1985). “Unified plastic analysis for infilled frames.” J. Struct. Div., ASCE, 111(7), 1427–1448.
7.
Smith, B. S., and Carter, C. (1969). “A method of analysis for infilled frames,” Proc. ICE, 44(7218), 31–48.
8.
Takayanagi, T., Derecho, A. T., and Corley, W. G. (1979). “Analysis of inelastic shear deformation effects in reinforced concrete structural wall systems.” Nonlinear Design of Conor. Struct., CSCE‐ASCE‐ACI‐CEB Int. Symp., Univ. of Waterloo Publication, Waterloo, Ontario, Canada.
9.
“Tentative provisions for the development of seismic regulations for buildings.” (1978). ATC 3‐06, Appl. Tech. Council, National Bureau of Standards, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Aug 1, 1992
Published in print: Aug 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.