Analysis of Buildings Using Strain‐Based Element with Rotational DOFs
Publication: Journal of Structural Engineering
Volume 118, Issue 5
Abstract
The existing problems with the finite element analysis of tall buildings are reviewed. It is found that: (1) many different definitions have been used for the nodal rotations, but only defining them as rotations of vertical fibers is really appropriate; (2) most simple elements are afflicted by the presence of parasitic shear, while strain function formulation provides a good means of solving the problem; and (3) the incorporation of some commonly accepted assumptions can substantially improve the computational efficiency of the method. Based on these observations, a new strain‐based plane stress element with rotational degrees of freedom defined as vertical fiber rotations is developed. The element is free of parasitic shear and converges so quickly that it can be used at a rate of only one layer per story. If implemented in conjunction with the assumption that the distortion of the sectional shape of the wall system is negligible, the proposed method is computationally as efficient as the frame method.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abu‐Ghazaleh, B. N. (1965). “Analysis of plate‐type prismatic structures,” PhD thesis, University of California, Berkeley, Calif.
2.
Allman, D. J. (1984). “A compatible triangular element including vertex rotations for plane elasticity analysis.” Comput. Struct., 19(1–2), 1–8.
3.
Allman, D. J. (1988). “A quadrilateral finite element including vertex rotations for plane elasticity analysis.” Int. J. Numer. Methods Engrg., 26(3), 717–730.
4.
Biswas, J. K., and Tso, W. K. (1974). “Three‐dimensional analysis of shear wall buildings to lateral loads.” J. Struct. Engrg. Div., ASCE, 100(5), 1019–1036.
5.
Chan, H. C., and Cheung, Y. K. (1979). “Analysis of shear walls using higher order elements.” Bldg. Envir., 14(3), 217–224.
6.
Cheung, Y. K. (1983). “Tall buildings 2.” Handbook of structural concrete, F. K. Kong, R. H. Evans, E. Cohen, and F. Roll, eds., Pitman Books Limited, London, England.
7.
Cheung, Y. K., and Swaddiwudhipong, S. (1978). “Analysis of frame shear wall structures using finite strip elements.” Proc. Instn. Div. Engrs., Part 2, 65(Sept.), 517–535.
8.
Cook, R. D. (1975). “Avoidance of parasitic shear in plane element.” J. Struct. Engrg. Div., ASCE, 101(6), 1239–1253.
9.
Coull, A., and Stafford Smith, B. (1983). “Tall buildings 1.” Handbook of structural concrete, F. K. Kong, R. H. Evans, E. Cohen, and F. Roll, eds., Pitman Books Limited, London, England.
10.
Glück, J., and Krauss, M. (1973). “Stress analysis of groups of interconnected thin‐walled cantilevers.” J. Struct. Engrg. Div., ASCE, 99(10), 2143–2165.
11.
Ha, K. H., and Desbois, M. (1989). “Finite elements for tall building analysis.” Comput. Struct., 33(1), 249–255.
12.
Jenkins, W. M., and Harrison, T. (1967). “Analysis of tall buildings with shear walls under bending and torsion.” Proc., Symp. on Tall Buildings, Pergamon Press, Oxford, England, 413–449.
13.
MacLeod, I. A. (1969). “New rectangular finite element for shear wall analysis.” J. Struct. Engrg. Div., ASCE, 95(3), 399–409.
14.
MacLeod, I. A. (1973). “Analysis of shear wall buildings by the frame method.” Proc., Instn. Civ. Engrs., Part 2, 55(Sept), 593–603.
15.
MacLeod, I. A. (1977). “Structural analysis of wall systems.” Struct. Engr., 55(11), 487–495.
16.
Mohr, G. A. (1981). “A simple rectangular membrane element including the drilling freedom.” Comput. Struct, 13(6), 483–487.
17.
Mohr, G. A. (1982). “Finite element formulation by nested interpolations: Application to the drilling freedom problem.” Comput. Struct, 15(2), 185–190.
18.
“Report by A.C.I. Committee 442—Response of buildings to lateral forces.” (1971). J. Am. Concr. Inst, 68(2), 81–106.
19.
Rosman, R. (1970). “Analysis of spatial concrete shear wall systems.” Proc., Instn. Civ. Engrs., Suppl. vol. 131–152.
20.
Rutenberg, A., Shtarkman, M., and Eisenberger, M. (1986). “Torsional analysis methods for perforated cores.” J. Struct. Engrg. Div., ASCE, 112(6), 1207–1227.
21.
Sabir, A. B. (1984). “Strain based finite elements for the analysis of shear walls.” Proc. 3rd Int. Conf. on Tall Buildings, Y. K. Cheung and P. K. K. Lee, eds., Hong Kong, 447–453.
22.
Sisodiya, R. G., and Cheung, Y. K. (1971). “A higher order in‐plane parallelogram element and its application to skewed girder bridges.” K. C. Rockey, et al., eds., Developments in bridge design and construction, Crosby Lockwood, London, England, 304–317.
23.
Timoshenko, S. P., and Goodier, J. N. (1982). Theory of elasticity, 3rd Ed., International Student Edition, McGraw‐Hill Kogakusha Ltd., Tokyo, Japan, 35–64.
24.
Tso, W. K., and Biswas, J. K. (1973a). “Analysis of core wall structures subjected to applied torque.” Bldg. Sci., 8(3), 251–257.
25.
Tso, W. K., and Biswas, J. K. (1973b). “General analysis of nonplanar coupled shear walls.” J. Struct. Engrg. Div., ASCE, 99(3), 365–380.
26.
Zienkiewicz, O. C., Parekh, C. J., and Teply, B. (1971). “Three‐dimensional analysis of buildings composed of floor and wall panels.” Proc. Instn. Civ. Engrs., Part 2, 49, 319–332.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: May 1, 1992
Published in print: May 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.