TECHNICAL PAPERS
May 1, 1992

Cracking Response of RC Members Subjected to Uniaxial Tension

Publication: Journal of Structural Engineering
Volume 118, Issue 5

Abstract

A new cracking theory is presented for the analysis of reinforced concrete (RC) members subjected to uniaxial tension. The theory is developed on the basis of the (actual) nonlinear bond stress‐slip relationship and of the extensive study of physical behavior. For a comparatively lightly loaded member (CLLM) concrete strain equals steel strain in a central portion of the RC member. For a comparatively heavily loaded member (CHLM) concrete strain is lower than steel strain everywhere in the RC member and attains its maximum value at mid‐span. In a CLLM, the first primary crack can occur at any section located in the aforementioned central portion; in a CHLM, the first primary crack can occur only at the symmetry section. After the first cracking any subsequent crack can form only at the symmetry section, contrary to the current opinion. The expressions for predicting the primary crack formation, crack spacing and width, as well as the tension‐stiffening effect are provided. The accuracy of the analytical solution is shown by comparison with available experimental results. The complete agreement shows the reliability of the cracking theory presented.

Get full access to this article

View all available purchase options and get full access to this article.

References

1.
Bresler, B., and Bertero, V. V. (1968). “Behavior of reinforced concrete under repeated load.” J. Struct. Div., ASCE, 94(6), 1567–1590.
2.
Dörr, K. (1978). “Bond‐behaviour of ribbed reinforcement under transversal pressure.” IASS Symp. on Nonlinear Behavior of Reinforced Spatial Struct., Vol. 1, Werner Verlag, Dusseldorf, Germany.
3.
Edwards, A., and Picard, A. (1972). “Theory of cracking in concrete members.” J. Struct. Div., ASCE, 98(12), 2687–2700.
4.
Eligehausen, R., Popov, E. P., and Bertero, V. V. (1983). “Local bond stress‐slip relationships of deformed bars under generalized excitations.” Report No. UCB/ERRC 83–23, Univ. of California, Berkeley, Calif.
5.
Goto, Y. (1971). “Cracks formed in concrete around deformed tension bars.” J. Amer. Concr. Inst., 68(4), 244–251.
6.
Gupta, A. K., and Maestrini, S. R. (1990). “Tension stiffness model for reinforced concrete bars.” J. Struct. Engrg., ASCE, 116(3), 769–790.
7.
Houde, J., and Mirza, M. S. (1972). “A study of bond stress‐slip relationships in reinforced concrete.” Struct. Concr. Series: No. 72–8, McGill University, Montreal, Canada.
8.
Jiang, D. H., Shah, S. P., and Andonian, A. T. (1984). “Study of the transfer of tensile forces by bond.” J. Amer. Concr. Inst., 81(4), 251–259.
9.
Keuser, M., and Mehlhorn, G. (1987). “Finite element models for bond problems.” J. Struct. Engrg., ASCE, 113(10), 2160–2173.
10.
Lee, S. L., Mansur, M. A., Tan, K. H., and Kasiraju, K. (1987). “Cracking behavior of concrete tension members reinforced with welded wire fabric.” ACI Struct. J., 84(6), 481–491.
11.
Leonhardt, F. (1977). “Crack control in concrete structures.” IABSE Surveys; S‐4/77, IABSE Periodical 3/1977, International Association for Bridge and Structural Engineering (IABSE), Zurich, Switzerland, 1–26.
12.
Rehm, G. (1961). “über die Grundlagen des Verbundes Zwischen Stahl und Beton” (in German). Deutscher Ausschuss für Stahlbeton, Berlin, Germany, (138), 1–59.
13.
Rizkalla, S. H., Hwang, L. S., and El Shahawi, M. (1983). “Transverse reinforcement effect on cracking behaviour of R.C. members.” Canadian J. Civ. Engrg., 10(4), 566–581.
14.
Russo, G., Zingone, G., and Romano, F. (1990). “Analytical solution for bond‐slip of reinforcing bars in R.C. joints.” J. Struct. Engrg., ASCE, 116(2), 336–355.
15.
Somayaji, S., and Shah, S. P. (1981). “Bond stress versus slip relationship and cracking response of tension members.” J. Amer. Concr. Inst., 78(3), 217–225.
16.
Tassios, T. P., and Yannopoulos, P. J. (1981). “Analytical studies on reinforced concrete members under cyclic loading based on bond stress‐slip relationships.” J. Amer. Concr. Inst., 78(3), 206–216.
17.
Viwathanatepa, S., Popov, E. P., and Bertero, V. V. (1979). “Effects of generalized loading on bond of reinforcing bars embedded in confined concrete blocks.” Report No. UCB/EERC 79–22, University of California, Berkeley, Calif.
18.
Yannopoulos, P. J. (1989). “Variation of concrete crack widths through the concrete cover to reinforcement.” Magazine of Concrete Res., 41(147), 63–68.

Information & Authors

Information

Published In

Go to Journal of Structural Engineering
Journal of Structural Engineering
Volume 118Issue 5May 1992
Pages: 1172 - 1190

History

Published online: May 1, 1992
Published in print: May 1992

Permissions

Request permissions for this article.

Authors

Affiliations

Gaetano Russo
Res., Dipartimento di Ingegneria Strutturale e Geotecnica, Universit` di Palermo, Viale delle Scienze, 90128 Palermo, Italy
Filippo Romano
Postgrad. Student, Dipartimento di Ingegneria Strutturale e Geotecnica, Universit` di Palermo

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

Cited by

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share