Fabric‐Reinforced, Mortar‐Faced, Foam‐Core Sandwich Panels
Publication: Journal of Structural Engineering
Volume 117, Issue 5
Abstract
This paper describes the construction of structural sandwich panels by wrapping reinforcing fabric around a foam board, then dipping it in a mortar slurry and screeding away excess mortar. A design procedure is described for obtaining the relative face, core, and reinforcing thicknesses to satisfy panel structural constraints at minimum material cost and at minimum weight for these faces, which have unequal tensile and compressive stiffnesses. Design is illustrated for a panel bending stiffness constraint. Stiffness/weight and stiffness/material cost ratios have been studied as a function of the amount of mineral wool added as a supplementary reinforcement stiffener. Stiffness/weight ratios are compared to those of pre‐stressed hollow‐core concrete decks. Potential applications include lightweight insulated panels for foundation walls and for walls and roofs of small buildings. Potential advantages include the elimination of concrete footing and foundation‐wall insulation costs as well as the reduction of construction time.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Fire endurance test.” (1990). Annual book of ASTM standards, E‐119, ASTM, Philadelphia, Pa.
2.
Hannant, D. J. (1978). Fibre cements and fibre concretes. John Wiley and Sons, New York, N.Y.
3.
Hartsock, J. A. (1969). Design of foam‐filled structures. Technomic Publishing Co., New York, N.Y.
4.
Heger, F. J., ed. (1981). Structural plastics design manual. ASCE, New York, N.Y.
5.
“Hexel design handbook for honeycomb sandwich structures.” (1970). TSB 123, Hexel Corp., New York, N.Y.
6.
Kuenzi, E. W. (1965). “Minimum weight structural sandwich.” Report 086, U.S. Dept. of Agric. Forest Service, Forest Products Lab., Madison, Wisc.
7.
National building code. (1990). Bldg. Officials and Code Administrators Int. Inc., Country Club Hills, Ill.
8.
Nicholls, R. (1976). Composite construction materials. Prentice Hall, Englewood Cliffs, N.J.
9.
Nicholls, R. (1991). “Strength and toughness of mineral wool‐polyethylene pulp‐reinforced mortars.” J. Mater, in Civ. Engrg., 3, in press.
10.
Swamy, R. N., ed. (1984). New reinforced concretes. Surrey Univ. Press., Surrey, England.
11.
Triantafillou, T. C., and Gibson, L. J. (1987a). “Failure mode maps for foam core sandwich beams.” Mater. Sci. and Engrg., 95, 37–53.
12.
Triantafillou, T. C., and Gibson, L. J. (1987b). “Minimum weight design of foam core sandwich panels for a given strength.” Mater. Sci. and Engrg., 95, 55–62.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: May 1, 1991
Published in print: May 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.