Seismic Reliability Analysis of Elevated Liquid‐Storage Vessels
Publication: Journal of Structural Engineering
Volume 117, Issue 5
Abstract
The objective of this paper is to consider variations in the overall weight of structures and the resulting changes in fundamental periods, base shears, and spectral characteristics in seismic reliability analyses. A methodology is presented for assessing the annual failure probabilities of critical structural components, as a result of seismic excitation, for elevated liquid‐storage vessels, which typically have highly uncertain weight (mass) fluctuations throughout their service lives because of the changes in the amount of liquid stored in the vessel. A dis‐cretized‐mass mechanical system is used to model the forces induced by sloshing liquid. The seismic load input is obtained by combining the seismic hazard curve of the region and the site‐dependent dynamic amplification spectrum. The various sources of uncertainty are quantified in the analysis and a generalized limit‐state equation is derived for structural components. The analysis of a liquid‐containing elevated spherical vessel 65 ft (20 m) in diameter in the seismically active San Francisco Bay region is presented as an illustrative application of the method.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abramson, H. N. (1966). “The dynamic behavior of liquids in moving containers.” NASA SP‐106, NASA, Washington, D.C.
2.
Building code requirements for reinforced concrete. (1977). ACI 318‐77, American Concrete Institute, Detroit, Mich.
3.
Bycroft, G. N. (1960). “White noise representation of earthquakes.” J. Engrg. Mech. Div., ASCE, 86(2), 1–17.
4.
Cornell, C. A. (1967). “Bounds on the reliability of structural systems.” J. Struct. Div., ASCE, 93(1), 171–200.
5.
Ellingwood, B., and Galambos, T. V. (1982). “Probability‐based criteria for structural design.” Struct. Safety, 1, 17–26.
6.
First order reliability concepts for design codes. (1976). CEB Bulletin 112, Comité Europeen du Béton, Paris, France.
7.
Freudenthal, A. M. (1947). “The safety of structures.” Trans., of ASCE, 112, 125–159.
8.
Haroun, M. A., and Ellaithy, H. M. (1985). “Seismically induced fluid forces on elevated tanks.” J. Tech. Topics Civ. Engrg., ASCE, 3(1), 1–15.
9.
Hasofer, A. M., and Lind, N. C. (1974). “Exact and invariant second moment code format.” J. Engrg. Mech. Div., ASCE, 100(1), 111–121.
10.
Housner, G. W. (1947). “Dynamic pressures of accelerated fluid containers.” Bull. Seismol. Soc. Am., 37(1), 19–31.
11.
Kennedy, R. P., and Ravindra, M. K. (1984). “Seismic fragilities for nuclear power plant risk studies.” Nuclear Engrg. Design, 79(1), 47–68.
12.
Kiremidjian, A. S., and Shah, H. C. (1978). “Probabilistic site‐dependent response spectra.” Report 29, The John A. Blume Earthquake Engineering Center, Stanford Univ., Stanford, Calif.
13.
Lind, N. C. (1977). “Formulation of probabilistic design.” J. Engrg. Mech. Div., ASCE, 103(2), 273–284.
14.
Lomnitz, C., and Rosenblueth, E. (1976). Seismic risk and engineering decisions. Elsevier Scientific Publishing Company, New York, N.Y.
15.
Manual of steel construction. (1980). Eighth Ed., American Institute of Steel Construction, Inc., Chicago, Ill.
16.
Rationalization of safety and serviceability factor in structural codes. (1977). Report 63, Construction Industry Research and Information Association, London, U.K.
17.
Seed, H. B., and Idriss, I. M. (1982). Ground motions and soil liquefaction during earthquakes. Earthquake Engineering Research Institute, Berkeley, Calif.
18.
Shepherd, R. (1972). “The two mass representation of a water tower structure.” J. Sound Vib., 23(3), 391–396.
19.
Standards for the design of cold‐formed steel members in buildings. (1981). CSA Report S‐136, Canadian Standards Association.
20.
Sues, R. H., Wen, Y. K., and Ang, A. (1985). “Stochastic evaluation of seismic structural performance.” J. Struct. Engrg., ASCE, 111(6), 1204–1218.
21.
Sumner, I. E., and Stofan, A. J. (1963). “An experimental investigation of the viscous damping of liquid sloshing in spherical tanks.” Tech. Note D‐1991, NASA, Washington, D.C.
22.
Uniform building code. (1985). International Conference of Building Officials, Whittier, Calif.
23.
Vanmarcke, E. H. (1979). “Some recent developments in random vibration.” Appl. Mech. Rev., 32(10), 1197–1202.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: May 1, 1991
Published in print: May 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.