Stability Analysis of Softening Frames
Publication: Journal of Structural Engineering
Volume 114, Issue 5
Abstract
As the design process is refined, second‐order (stability) analysis becomes more important for both steel and concrete structures. Softening in concrete members, defined as the loss of moment capacity at advanced curvatures, is a material instability. The presence of significant axial force in a softening member raises the possibility of double or interactive instability, i.e., instability from large axial forces and instability from softening. Stability functions for members with finite softening lengths are derived. Computer program SOAPS (Second‐Order Analysis with Plasticity and Softening), developed for the stability analysis of plane frames with elastic‐plastic‐softening characteristics, incorporating stability functions and the effect, is used. Three examples are presented to demonstrate the application of program SOAPS. Increasing axial loads reduce the critical softening parameter for any hinge and therefore may also reduce the number of hinges formed before collapse. Consideration of stability effects may lead to a different order of hinge formation and large reductions in collapse load.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abdel‐Baset, S. B., Grierson, D. E., and Lind, N. C. (1973). “Second‐order collapse load analysis: LP approach.” J. Struct. Div., ASCE, 99(11), 2215–2228.
2.
ACI‐ASCE Committee 428. (1968). “Progress report on code clauses for limit design.” ACI J., 65(9), 713–715.
3.
Baker, A. L. L., and Amarakone, A. M. N. (1964). “Inelastic hyperstatic frames analysis.” Proc. Int. Symp. on the Flexible Mechanics of Reinforced Concrete, ACI SP‐12, Miami, Fla., 85–142.
4.
Bazant, Z. P. (1976). “Instability, ductility, and size effect in strain‐softening concrete.” J. Engrg. Mech. Div., ASCE, 102(2), 331–344.
5.
CEB‐FIP. (1970). “International recommendations for the design and construction of concrete structures.” Principles and Recommendations, FIP Sixth Congress, Prague, Czechoslovakia. Cement and Concrete Assoc., London, U.K.
6.
Cranston, W. B. (1965a). “A computer method for inelastic analysis of plane frames.” Technical Report No. TRA/386, Cement and Concrete Association, London, U.K.
7.
Cranston, W. B. (1965b). “Tests on reinforced concrete frames; 1: Pinned portal frames.” Technical Report No. TRA/392, Cement and Concrete Association, London, U.K.
8.
Darvall, P. L. (1983). “Critical softening of hinges in indeterminate beams and portal frames.” Civ. Engrg. Trans., I.E. Australia, 25(3), 199–210.
9.
Darvall, P. L. (1984). “Critical softening of hinges in portal frames.” J. Struct. Engrg., ASCE, 110(1), 157–162.
10.
Darvall, P. L., and Mendis, P. A. (1985). “Elastic‐plastic‐softening analysis of plane frames.” J. Struct. Engrg., ASCE, 111(4), 871–888.
11.
Horne, M. R. (1963). “Elastic‐plastic failure loads of plane frames.” Proc., Royal Soc. A., London, U.K., 274(1,358), 343–364.
12.
Horne, M. R., and Merchant, W. (1965). The stability of frames. Pergamom Press, New York, N.Y.
13.
Horne, M. R., and Morris, L. J. (1981). Plastic design of low‐rise frames. Constrado Monographs, London, U.K.
14.
Jennings, A., and Majid, K. (1965). “An elastic‐plastic analysis by computer for framed structures loaded up to collapse.” Struct. Engr., 43(12), 407–412.
15.
Jonatowski, J. J., and Birnstiel, C. (1970). “Inelastic stiffened suspension space structures.” J. Struct. Div., ASCE, 96(6), 1143–1166.
16.
Kassimali, A. (1983). “Large deformation analysis of elastic‐plastic frames.” J. Struct. Engrg., ASCE, 109(8), 1869–1886.
17.
Korn, A. (1981). “Effect of bowing on rectangular plane frames.” J. Struct. Div., ASCE, 107(3), 569–574.
18.
Korn, A., and Galambos, T. V. (1968). “Behavior of elastic‐plastic frames.” J. Struct. Div., ASCE, 94(5), 1119–1142.
19.
Livesley, R. K., and Chandler, D. B. (1956). Stability functions for structural frameworks. Manchester University Press, Manchester, U.K.
20.
Maier, G., Zavelani, A., and Dotreppe, J. C. (1978). “Equilibrium branching due to flexural softening.” J. Engrg. Mech. Div., ASCE, 99(4), 897–901.
21.
Majid, K. I. (1968). “The evaluation of the failure loads of plane frames.” Proc., Royal Soc. A., London, U.K., 306(1,486), 297–311.
22.
Majid, K. I. (1972). Non‐linear structures. Butterworth & Co. (Publ.) Ltd., London, U.K.
23.
Majid, K. I., and Anderson, D. (1968). “The computer analysis of large multistorey framed structures.” Struct. Engr., 46(11), 357–365.
24.
Mendis, P. A. (1986). “Softening of reinforced concrete structures,” thesis presented to Monash University, at Victoria, Australia, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
25.
Mendis, P. A., and Darvall, P. L. (1984). “Elastic‐plastic‐softening analysis of plane frames.” Research Report No. 5/1984, Dept. of Civil Engrg., Monash University, Victoria, Australia.
26.
Mendis, P. A., and Darvall, P. L. (1987). “Program SOAPS for stability analysis with softening.” Research Report, Dept. of Civ. Engrg., Monash University, Victoria, Australia.
27.
Oran, C. (1973). “Tangent stiffness in plane frames.” J. Struct. Div., ASCE, 99(6), 973–985.
28.
Oran, C., and Kassimali, A. (1976). “Large deformations of framed structures under static and dynamic loads.” Comp. Struct., 6, 539–547.
29.
Wang, C. K. (1973). Computer methods in advanced structural analysis. Intext Educational Publishers, New York, N.Y.
30.
Wang, C. K., and Talaboc, C. P. (1980). “Second‐order elastic‐plastic analysis of steel frames.” ASCE, Convention and Exposition, Preprint No. 80‐509, Hollywood, Florida.
31.
Wood, R. H. (1958). “The stability of tall buildings,” Proc., I.C.E. (London, U.K.), 11, 69–102.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: May 1, 1988
Published in print: May 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.