Role of Energy Absorption in Reliability of Tall Columns
Publication: Journal of Structural Engineering
Volume 114, Issue 5
Abstract
Earthquake resistant design of key structures at major industrial facilities is often performed with an energy‐absorbing or strong‐motion dissipating mechanism in mind. The energy is usually dissipated through the deformation or damage of less critical components in order to prevent or decrease the potential of a more catastrophic failure of a structure. This paper presents a simplified approach for evaluating the effects of energy dissipation through deformations in foundation bolts of tall industrial columns subjected to strong earthquake ground motion. In particular, changes in the failure probability of a column in the more critical mode of skirt buckling are studied as a function of bolt yielding. The post‐yielding nonlinear response motion of the structure is considered in the failure probability evaluation. Although the procedure presented in this paper is applied to tall industrial columns, it can be used for a variety of other types of structures with only minor modifications.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ang, A. H.‐S., and Tang, W. H. (1984). Probability concepts in engineering planning and design; Volume II. Decision, risk and reliability. John Wiley and Sons, New York, N.Y.
2.
Benjamin, J. R., and Cornell, C. A. (1970). Probability, statistics, and decision for civil engineers. McGraw‐Hill Book Co., New York, N.Y.
3.
Clough, R. W. (1970). “Earthquake response of structures.” Earthquake engineering, R. Wiegel, ed., Prentice‐Hall, Inc., Englewood Cliffs, N.J., 307–334.
4.
Donnell, L. H. (1934). “A new theory for the buckling of thin cylinders under axial compression and bending.” Trans. Am. Soc. Mech. Engrg., 56, 795–806.
5.
Donnell, L. H., and Wen, C. C. (1950). “Effect of imperfections of buckling of thin cylinders and columns under axial compression.” J. Appl. Mech., 17(1), 73–82.
6.
Galambos, T. V., et al. (1982). “Probability based load criteria: assessment of current design practice.” J. Struct. Div., ASCE, 108(ST5), 959–977.
7.
Gates, N. C. (1977). “The earthquake response of deteriorating systems,” thesis presented to the California Institute of Technology, at Pasadena, Calif., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
8.
Hohenbichler, J., and Rackwitz, R. (1981). “Non‐normal dependent vectors in structural reliability.” J. Engrg. Mech. Div., ASCE, 107(EM6), 1227–1238.
9.
Kennedy, R. P., and Ravindra, M. K. (1983). “Seismic fragilities for nuclear power plant risk studies.” Second CSNI Specialist Meeting on Probabilistic Methods in Siesmic Risk Assessment for Nuclear Power Plants. Livermore, Calif.
10.
Kircher, C. A., et al. (1978). “Seismic analysis of oil refinery structures.” John A. Blume Earthquake Engineering Center Report No. 31, Stanford University, Stanford, Calif.
11.
Kiremidjian, A., et al. (1985). “Seismic risk to major industrial facilities.” John A. Blume Earthquake Engineering Center Report No. 72, Stanford University, Stanford, Calif.
12.
Kiremidjian, A. S., and Shah, H. C. (1975). “Seismic hazard mapping of California.” The John A. Blume Earthquake Engineering Center Report No. 21, Stanford University, Stanford, Calif.
13.
Nielsen, R. J. (1986). “Reliability of tall columns subjected to nonstationary vertical and horizontal ground motions,” thesis presented to Stanford University, at Stanford, Calif., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
14.
Rackwitz, R., and Fießler, B. (1978). “Structural reliability under combined random load sequences.” Comput. Struct., 9(5), 489–494.
15.
Recommended practice No. 11, wind and earthquake design standards. (1980). Chevron Corp., San Francisco, Calif.
16.
Steinbrugge, K., and Moran, D. F. (1954). “An engineering study of the Southern California earthquake of July 21, 1952 and its aftershocks.” Bull. Seismol. Soc. Am., 44(28), 270–278.
17.
Thoft‐Christensen, P., and Baker, M. J. (1982). Structural reliability theory and its applications. Springer Verlag, New York, N.Y.
18.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability. McGraw‐Hill Book Co., New York, N.Y.
19.
Timoshenko, S. P., and Goodier, J. N. (1934). Theory of elasticity. McGraw‐Hill Book Co., New York, N.Y.
20.
Timoshenko, S. P., Young, D. H., and Weaver, W., Jr. (1974). Vibration problems in engineering, 4th ed., John Wiley and Sons, New York, N.Y.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: May 1, 1988
Published in print: May 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.