Strength of Thin‐Walled Square Steel Box Columns
Publication: Journal of Structural Engineering
Volume 113, Issue 4
Abstract
The present study is concerned with the strength of thin‐walled steel box columns of square cross section that are pinned and subjected to axial load and equal moment at the ends. The local buckling in the component plates is allowed for by using piecewise linear stress‐strain curves that are approximations of previous research findings. Due allowance is made to account for the effect of residual stresses due to welding and overall column imperfections upon the ultimate strength. The column analysis is carried out by integrating numerically along the length the moment‐curvature‐thrust relationships. This method of column analysis is free from iteration and could predict the ultimate strength accurately. The results are presented in the form of column curves and interaction diagrams for typical values of plate slenderness ratios, residual stress levels, and initial column imperfections. Comparisons are made between the proposed column curves and multiple column curves of ECCS and SSRC.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bijlaard, P. P., and Fisher, G. P. (1952). “Interaction of column and local buckling in compression members,” NACA, T.N. 2640.
2.
Bijlaard, P. P., and Fisher, G. P. (1953). “Column strength of H‐section and square tubes in the post‐buckling range of the component plates,” NACA, T.N. 2994.
3.
Bradfield, C. D., and Chladny, E. (1979). “A review of the elastic‐plastic analysis of steel plates loaded in in‐plane compression,” Report CUED/D‐Struct/TR.77, Dept. of Engrg., Cambridge Univ., Cambridge, U.K.
4.
“Steel, concrete and composite bridges,” (1980). Specification for materials and workmanship, steel BS5400, Part 6, British Standards Instn., London, U.K.
5.
Chen, W. F., and Santathadaporn, S. (1969). “Curvature and the solution of eccentrically loaded columns,” Engrg. Mech. Div., ASCE, 95(2), 21–39.
6.
Crisfield, M. A. (1975). “Full‐range analysis of steel plates and stiffened panels under uni‐axial compression,” Proc. Instn. Civ. Engrs., Part 2, 59, 595–624.
7.
DeWolf, J. T., Pekoz, T., and Winter, G. (1974). “Local and overall buckling of cold‐formed members,” J. Struct. Div., ASCE, 100(10), 2017–2036.
8.
“European recommendation for steel construction,” (1978). ECCS, The Construction Press, London, U.K., and New York, N.Y.
9.
Frieze, P. A., Dowling, P. J., and Hobbs, R. E. (1975). “Steel box girder bridges—parametric study of plates in compression,” CESLIC Report BG39, Engrg. Structures Lab., Civ. Engrg. Dept., Imperial Coll., London, U.K.
10.
Graves‐Smith, T. R. (1967). “The ultimate strength of locally buckled columns of arbitrary length,” Symposium on Thin‐walled Steel Structures, Swansea, Crosby Lockwood, London, U.K., 35–61.
11.
Harding, J. E., Hobbs, R. E., and Neal, B. G. (1977). “The elasto‐plastic analysis of imperfect square plates under in‐plane loading,” Proc. Instn. Civ. Engrs., Part 2, 63, 137–158.
12.
Hauck, G. F., and Lee, S. L. (1963). “Stability of elasto‐plastic wide‐flange columns,” J. Struct. Div., ASCE, 89(6), 297–324.
13.
Hongladaromp, T., Taeracoop, S., Nishino, F., and Lee, S. L. (1972). “Ultimate strength of pipe columns with initial curvature,” Proceedings, Japanese Society of Civil Engineers, 208, 149–156.
14.
Johnston, B. G., Ed., (1976). Guide to stability design for metal structures, 3rd ed., Structural Stability Research Council, John Wiley & Sons, New York, N.Y.
15.
Kalyanaraman, V., Pekoz, T., and Winter, G. (1979). “Unstiffened compression elements,” J. Struct. Div., ASCE, 105(5), 813–828.
16.
Little, G. H. (1974). “Rapid analysis of plate collapse by live energy minimisation,” Int. J. Mech. Sci., 19, 725–744.
17.
Little, G. H. (1979). “The strength of square steel box columns—design curves and their theoretical basis,” The Struct. Engr., 57A(2), 49–61.
18.
Moxham, K. E. (1971). “Theoretical determination of the strength of welded steel plates in compression,” Report No. CUED/C‐Strut/TR.2., Dept. of Engrg., Cambridge Univ., Cambridge, U.K.
19.
Nishino, F., Kanchanalai, T., and Lee, S. L. (1972). “Ultimate strength of wide flange and box columns,” Proc. Colloq. on Centrally Compressed Struts, Paris, France, IABSE, 254–265.
20.
Rhodes, J., and Harvey, J. M. (1977). “Interaction behaviour of plain channel columns under concentric or eccentric loading,” 2nd Intl. Colloq. on Stability of Steel Structures, Liege, Belgium, IABSE, 439–444.
21.
Rossow, E. C., Barney, G. B., and Lee, S. L. (1967). “Eccentrically loaded steel columns with initial curvatures,” J. Struct. Div., ASCE, 93(2), 339–358.
22.
Sherman, D. (1971). “Residual stresses and tubular compression members,” J. Struct. Div., ASCE, 97(3), 891–905.
23.
Tall, L. (1977). “The calculation of residual stresses—in perspective,” Trans. Intl. Conf. on Residual Stresses in Welded Construction, The Welding Institute, London, U.K.
24.
Usami, T., and Fukumoto, Y. (1982). “Local and overall buckling of welded box columns,” J. Struct. Div., ASCE, 108(3), 525–542.
25.
Usami, T., and Fukumoto, Y. (1984). “Welded box compression members,” J. Struct. Div., ASCE, 110(10), 2457–2470.
26.
Van der Neut, A. (1968). “The interaction of local buckling and column failure of thin‐walled compression members,” Proc. 12th Intl. Cong. of Applied Mechanics, Springer‐Verlag, New York, N.Y., 389–399.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Apr 1, 1987
Published in print: Apr 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.