Static/Dynamic Analysis of Locally Buckled Frames
Publication: Journal of Structural Engineering
Volume 113, Issue 2
Abstract
The static and dynamic behavior of plane frames composed of thinwalled steel members is presented. Frame analysis includes post‐local‐buckling and/or first‐order geometric nonlinearities. Post‐local‐buckling behavior is included using the effective width concept which includes both axial and bending stresses. Direct iteration is used to calculate the effective cross section properties for members that have locally buckled. An “exact” elastic stiffness matrix, finite element geometric stiffness, consistent mass and Rayleigh damping matrix formulation is used to discretize the dynamic equilibrium equations. The nonlinear dynamic equations are solved using a modified Newton‐Raphson iteration strategy coupled with Newmark's time integration scheme. Static and dynamic analyses of a two‐bay, two‐story frame are considered. Static problem results are presented to demonstrate the accuracy of the formulation and the influence of local buckling and/or first‐order geometric nonlinearities. Dynamic simulations are based on subjecting the two‐story, two‐bay frame to a sway pulse loading to simulate wind pressure. The dynamic results include linear elastic, local buckling, and/or first‐order geometric nonlinearity.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bathe, K. J., and Cimento, A. P. (1980). “Some Practical Procedures for the Solution of Nonlinear Finite Element Equations,” Comp. Meth. Appl. Mech. Engrg., 22, 59–85.
2.
Blandford, G. E., Wang, S. T., and Wang, N. T. (1982). “Dynamic Behavior of Locally Buckled Frames.” Proc. 6th Int. Spec. Conf. Cold‐Formed Steel Struct., St. Louis, Mo., 349–368.
3.
Blandford, G. E., Wang, S. T., and Wang, N. T. (1984). “Geometric Nonlinear Dynamic Analysis of Locally Buckled Frames.” Proc. 7th Int. Spec. Conf. Cold‐Formed Steel Struct., St. Louis, Mo., 167–187.
4.
Culver, C. G., and Tassel, R. A. (1971). “Shock Loading of Thin Compression Elements.” Proc. 1st Spec. Conf. Cold‐Formed Steel Struct., Univ. Missouri, Rolla, Mo., 65–72.
5.
Culver, C. G., Zanoni, E. A., and Osgood, A. H. (1971). “Response of Thin‐Walled Beams to Impact Loading.” Proc. 1st Spec. Conf. Cold‐Formed Steel Struct., Univ. Missouri, Rolla, Mo., 82–90.
6.
Ghali, A., and Neville, A. M. (1978). Structural Analysis—A Unified Classical and Matrix Approach, Ch. 15, Chapman and Hall, London, England.
7.
Horne, M. R., and Merchant, W. (1965). The Stability of Frames, Pergamon Press, New York, N.Y., 143–146.
8.
Johnson, A. L., and Winter, G. (1968). “Behavior of Stainless Steel Columns and Beams,” J. Struct. Div., ASCE, 95(5), 97–118.
9.
Kalyanaraman, V., and Ramakrishna, P. (1984). “Non‐Uniformly Compressed Stiffened Elements,” Proc. 7th Int. Spec. Conf. Cold‐Formed Steel Struct., St. Louis, Mo., 75–92.
10.
McGuire, W., and Gallagher, R. H. (1979). Matrix Structural Analysis, Ch. 4 and 9, John Wiley & Sons, New York, N.Y.
11.
Newmark, N. M. (1959). “A Method of Computation for Structural Dynamics,” J. Engrg. Mech. Div., ASCE, 85, 67–94.
12.
Przemieniecki, J. S. (1968). Theory of Matrix Structural Analysis, Ch. 11 and 15, McGraw‐Hill, New York, N.Y.
13.
Taylor, R. L. (1977) in O. C. Zienkiewicz, The Finite Element Method, 3rd ed., Ch. 24, McGraw‐Hill, New York, N.Y.
14.
Usami, J. (1982). “Post Buckling of Plates in Compression and Bending,” J. Struct. Div., ASCE, 108(3), 591–609.
15.
Vaidya, N. R., and Culver, C. G. (1971). “Impact Loading of Thin‐Walled Columns.” Proc. 1st Spec. Conf. Cold‐Formed Steel Struct., Univ. Missouri, Rolla, Mo., 91–98.
16.
Wang, S. T., Errera, S. J., and Winter, G. (1975). “Behavior of Cold‐Rolled Stainless Steel Members.” J. Struct. Div., ASCE, 101(11), 2337–2357.
17.
Winter, G. (1947). “Strength of Thin‐Walled Compression Flanges.” Trans. ASCE, 112, 527–555.
18.
Zanoi, E. A., and Culver, C. G. (1971). “Impact Loading of Thin‐Walled Beams.” Proc. 1st Spec. Conf. Cold‐Formed Steel Struct., Univ. Missouri, Rolla, Mo., 73–81.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Feb 1, 1987
Published in print: Feb 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.