Reliability‐Conditioned Partial Safety Factors
Publication: Journal of Structural Engineering
Volume 113, Issue 2
Abstract
The first‐order second‐moment (FOSM) method and the advanced second‐moment (ASM) method are used to determine partial safety factors. Design formats based on these methods may result in engineering designs with reliability levels that are different from the ones specified in developing the design formats. The FOSM and ASM methods are evaluated in this paper, and reliability‐conditioned (RC) method is proposed in this paper. The proposed method overcomes the shortcomings of the FOSM and ASM methods, and is believed to result in partial safety factors which give engineering designs reliability levels equal to the specified ones. The calibration of existing codes can be accomplished easily by determining the safety levels of the current designs first and then the required partial safety factors for the new design format to give the same safety levels can be determined.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Concrete Institute, “Building Code Requirements for Reinforced Concrete,” ACI Standard 318‐83, Detroit Mich., 1983.
2.
American Petroleum Institute, “API Recommended Practice for Planning, Designing, and Constructing Fixed Offshore Platforms,” API RP2A, 12th ed., Dallas, Tex., 1981.
3.
Ang, A. H.‐S., “Structural Risk Analysis and Reliability Based Design,” Journal of the Structural Division, ASCE, Vol. 99, No. 9, Sept., 1973, pp. 1891–1910.
4.
Ang, A. H.‐S., and Cornell, C. A., “Reliability Bases of Structural Safety and Design,” Journal of the Structural Division, ASCE, Vol. 100, No. 9, Sept., 1974, pp. 1755–1769.
5.
Ang. A. H.‐S., and Tang, W. H., Probability Concepts in Engineering Planning and Design, Vol. 2—Decision, Risk, and Reliability, John Wiley and Sons, Inc., New York, N.Y., 1983, pp. 412–434.
6.
Ayyub, B. M., and Haldar, A., “Practical Structural Reliability Techniques,” Journal of Structural Engineering, ASCE, Vol. 110, No. 8, Aug., 1984.
7.
Ayyub, B. M., and White, G. J., “Partial Safety Factors in Reliability‐Based Structural Codes,” Presented at the ASME Pressure Vessels and Piping Conference, Publication No. 86‐PVP‐9, Chicago, Ill., July 21—24, 1986.
8.
“Common Unified Rules for Different Types of Construction and Material,” Bulletin D'Information No. 124E, Comite Euro‐International du Benton, Paris, France, Apr., 1978.
9.
Ellingwood, B. R., et al., “Development of a Probability Based Load Criterion for American National Standard A58,” National Bureau of Standards, Special Publication No. 577, June, 1980.
10.
“First Order Reliability Concepts for Design Codes,” Bulletin D'Information No. 112, Comite European du Benton, Munich, West Germany, July, 1976.
11.
Haldar, A., “Chapter 6‐Statistical Methods.” Numerical Methods in Geomechanics, edited by J. B. Martins, NATO Advanced Study Institute Series, D. Reidel Publishing Co., Boston, Mass., 1981.
12.
Hasofer, A. M., and Lind, N. C., “Exact and Invariant Second‐Moment Code Format,” Journal of the Engineering Mechanics Division, ASCE, Vol. 100, No. 1, Feb., 1974, pp. 111–121.
13.
Mansour, A. E., Jan, H. Y., et al., “Implementation of Reliability Methods to Marine Structures,” Trans. Society of Naval Architects and Marine Engineers, Vol. 92, 1984.
14.
Moses, F., “Guidelines for Calibrating API RP2A for Reliability‐Based Design,” API Prac. Project 79‐22, American Petroleum Institute, June, 1980.
15.
Moses, F., “Utilizing a Reliability‐Based API RP2A Format,” Final Report, API Prac. Project 82‐22, American Petroleum Institute, Nov., 1983.
16.
Moses, F., and Russel, L., “Applicability of Reliability Analysis in Offshore Design Practice,” API Prac. Project 79‐22, American Petroleum Institute, June, 1980.
17.
“National Building Code of Canada,” National Research Council of Canada, Ottawa, Canada, 1977.
18.
Rackwitz, R., and Fiessler, B., “Structural Reliability Under Combined Random Load Sequences,” Computers and Structures, Vol. 9, 1978, pp. 489–494.
19.
Ravindra, M., Galambos, R. V., and Cornell, C. A., “Wind and Snow Load Factors for Use in LRFD,” Journal of the Structural Engineering, ASCE, Vol. 104, No. 9, Sept., 1978.
20.
“Rules for the Design, Construction and Inspection of Offshore Structures,” Det norske Veritas, Oslo, 1977.
21.
Thoft‐Christensen, P., and Baker, M. J., Structural Reliability Theory and Its Applications, Springer‐Verlag, New York, N.Y., 1982, pp. 96–101.
22.
White, G. J., and Ayyub, B. M., “Reliability Methods for Ship Structures,” Naval Engineers Journal, Vol. 97, No. 4, May, 1985, pp. 86–96.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Feb 1, 1987
Published in print: Feb 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.