Softening in Reinforced Concrete Beams and Frames
Publication: Journal of Structural Engineering
Volume 113, Issue 12
Abstract
The softening postpeak load‐deflection relation for cracking reinforced concrete beams and frames is analyzed by layered finite elements. Concrete is assumed to exhibit strain softening in both tension and compression, and the steel reinforcement is elastic‐plastic. The bending theory assumptions are used and bond slip of reinforcement is neglected. It is shown that the model can satisfactorily approximate the existing test results for softening beams and frames. At the same time, the constitutive laws with strain softening, including those of continuum damage mechanics, are shown to lead to spurious sensitivity of results to the chosen finite element size, similar to that documented before for other strain‐softening problems. In analogy to the finite element crackband model, this problem can be overcome if the minimum admissible element size is specified as a cross section property; its suitable value appears to be equal to the beam depth.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bažant, Z. P. (1976). “Instability, ductility and size effect in strain‐softening concrete.” J. Engrg. Mech. Div., ASCE, 102(2), 331–334.
with discussions in Vol. 103, 357–358, 775–777;
based on Struct. Engrg. Report No. 74‐8/640, Northwestern University, 1974.
2.
Bažant, Z. P. (1982). “Crack‐band model for fracture of geomaterials.” Proc. 4th Internatl. Conf. on Numer. Meth. in Geomech., held in Edmonton, Alberta, Canada, Z. Eisenstein, ed., Vol. 3, invited lectures, 1137–1152.
3.
Bažant, Z. P. (1984). “Imbricate continuum and its variational derivation.” J. of Engrg. Mech., 110(12), 1693–1712.
4.
Bažant, Z. P. (1985). “Mechanics of fracture and progressive cracking in concrete structures.” Chapter 1, Fracture mechanics applied to concrete structures, G. C. Sih, ed., Martinus Nijhoff Publ. B. V., The Hague, the Netherlands, 1–94.
5.
Bažant, Z. P. (1985). “Fracture mechanics and strain‐softening of concrete.” Proc. U.S.‐Japan Seminar Finite Element Analysis of R. C. Struct., held in Tokyo, Japan, American Society of Mechanical Engineers, C. Meyer, ed., 121–150.
6.
Bažant, Z. P., Belytschko, T. B., and Chang, T. P. (1984). “Continuum theory for strain softening.” J. of Engrg. Mech., 110(12), 1666–1692.
7.
Bažant, Z. P., and Cedolin, L. (1982). “Fracture mechanics of reinforced concrete.” J. Engrg. Mech., ASCE, 106, 1287–1306.
8.
Bažant, Z. P., and Chern, J. C. (1985). “Concrete creep at variable humidity: Constitutive law and mechanism.” Matériaux et constructions, RILEM, 18(13), Paris, France, 1–20.
9.
Bažant, Z. P., Oh, B. H. (1983). “Crack‐band theory for fracture of concrete.” Matériaux et constructions, RILEM, 16(32), Paris, France, 155–177.
10.
Cranston, W. B. (1965). “Tests on reinforced concrete frames. 1: Pinned portal frames.” Tech. Report TRA/392, Cement and Concrete Association, London, England.
11.
Crisfield, M. A. (1982). “Local instabilities in the nonlinear analysis of reinforced concrete beams and slabs.” Proc., Institute of Civil Engineers, 73(2), 135–145.
12.
Crisfield, M. A. (1984). “Difficulties with current numerical models for reinforced concrete and some tentative solutions.” Proc. Int. Conf. Computer‐Aided Analysis and Design of Concrete Struct., held in Split, Yugoslavia, F. Damjanic and E. Hinton et al., eds., publ. by Pineridge Press, Swansea, England, 331–358.
13.
Crisfield, M. A. (1984). “Overcoming limit points with material softening and strain localization.” Numer. Meth. for Nonlinear Problems, C. Taylor et al., eds., 2, Pineridge, Swansea, England, 244–277.
14.
Darvall, P. LeP. (1983). “Critical softening of hinges in indeterminate beams and portal frames.” Civ. Engrg. Trans., I. E. Australia, CE25(3), 199–210.
15.
Darvall, P. LeP. (1983). “Some aspects of softening in flexural members.” Res. Report 3, Dept. of Civ. Engrg., Monash Univ., Clayton, Australia.
16.
Darvall, P. LeP. (1983). “Critical softening of hinges in portal frames.” J. Struct. Engrg., ASCE, 110(1), 157–162.
17.
Darvall, P. LeP., and Mendis, P. A. (1984). “Elastic‐plastic‐softening analysis of plane frames.” J. Struct. Engrg., ASCE, 111(4), 871–888.
18.
Kang, Y. J., and Scordelis, A. C. (1980). “Nonlinear analysis of prestressed concrete frames.” J. Struct. Div., ASCE, 106(2), 445–467.
19.
Maier, G. (1967). “On elastic plastic structures with associated stress strain relations allowing for work softening.” Meccanica, 2(1), 55–64.
20.
Maier, G. (1967). “Extremum theorems for the analysis of elastic plastic structures containing unstable elements.” Meccanica, 1(4), 235–242.
21.
Maier, G. (1971). “Incremental plastic analysis in the presence of large displacements and physical instabilitizing effects.” Int. J. of Solids and Struct., 7, 345–372.
22.
Maier, G., Zavelani, A., and Dotreppe, J. C. (1973). “Equilibrium branching due to flexural softening.” J. of Engrg. Mech. Div., ASCE, 99(4), 897–901.
23.
Maier, G. (1971). “On structural instability due to strain‐softening.” IUTAM Symp. on Instability of Continuous Systems, held in Herrenhalb, Germany, Springer Verlag, West Berlin, 411–417.
24.
Mazars, J. (1984). “Application de la mécanique de l'endommagement au comportment nonlinéaire et à la rupture du béton de structure,” thesis presented to the University of Paris 6, at Paris, France, in partial fulfillment of the requirements for the degree of Doctor of Science.
25.
Mróz, Z. (1985). “Current problems and new directions in mechanics of geomaterials.” Chapter 24, Mechanics of geomatrials: Rocks, concretes, soils, Z. P. Bažant, ed., John Wiley and Son, Chichester, England, New York, N.Y., 539–566.
26.
Nylander, H., and Sahlin, S. (1955). “Investigation of continuous concrete beams at far advanced compressive strains in concrete.” Betong, 40(3), Translation No. 66, Cement and Concrete Association, London, England.
27.
Owen, D. R. J., and Hinton, E. (1980). “Finite elements in plasticity: Theory and practice.” Pineridge Press Ltd., Swansea, England.
28.
Soliman, M. T. M., and Yu, C. W. (1967). “The flexural stress‐strain relationship of concrete confined by rectangular transverse reinforcement.” Magazine of Concrete Res., 19(61), 223–238.
29.
Wood, R. H. (1968). “Some controversial and curious developments in the plastic theory of structures.” Engineering Plasticity, J. Heyman and F. A. Leckie, eds., Cambridge Univ. Press, Cambridge, England, 665–691.
30.
Zienkiewicz, O. C. (1977). The Finite Element Method. McGraw‐Hill, London, England, New York, N.Y., 1977.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Dec 1, 1987
Published in print: Dec 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.