Beams with Small Rectangular Opening Under Torsion, Bending, and Shear
Publication: Journal of Structural Engineering
Volume 113, Issue 10
Abstract
A set of generalized strength equations based on the skewbending model has been developed to predict the torsional strength and failure mode of reinforced concrete beams with or without a small transverse opening. A torsion‐bending‐shear interaction surface is generated using the proposed strength equations. Twenty‐four rectangular reinforced‐concrete beams containing a transverse opening of constant dimensions were grouped into four different series and were tested under various combinations of torsion, bending, and shear. The parameters were the ratio between top and bottom longitudinal reinforcement, the torsion‐moment ratio, and the moment‐shear ratio. Close agreement is observed between the theoretical predictions and the test results of the writers and of other investigators.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ACI Committee 318. (1983). “Building code requirements for reinforced concrete.” ACI318‐83, Amer. Concrete Inst.
2.
Behera, U., and Ferguson, P. M. (1970). “Torsion, shear, and bending on stirruped L‐beams.” J. Struct. Div., ASCE, 96(ST7) 1271–1286.
3.
Collins, M. P., Walsh, P. F., Archer, F. E., and Hall, A. S. (1968). “Ultimate strength of reinforced concrete beams subjected to combined torsion and bending.” Torsion of structural concrete, (SP‐18), Amer. Concrete Inst. 379–402.
4.
Collins, M. P., Walsh, P. F., and Hall, A. S. (1968). Discussion of “Ultimate strength of reinforced concrete beams in combined torsion and shear,” Amer. Concrete Inst. J., 65(9), 786–788.
5.
Daniel, H. R., and McMullen, A. E. (1977). “Torsion in concrete beams containing an opening.” J. Struct. Div., 103(ST3), 607–617.
6.
Hasnat, A., and Akhtaruzzaman, A. A. (1983). “An experimental investigation to determine the ultimate strength of reinforced concrete beams containing an opening under bending and torsion,” Final Report, Res. Proj. No. 01‐21, Sci. Res. Admin., Coll. of Engrg., King Abdulaziz Univ., Jeddah, Saudi Arabia, 1–74.
7.
Hasnat, A., and Akhtaruzzaman, A. A. (1985). “Reinforced concrete beams containing an opening under combined torsion, bending and shear.” Final Report, Res. Proj. No. 03‐206, Sci. Res. Admin., Coll. of Engrg., King Abdulaziz Univ., Jeddah, Saudi Arabia, 1–76.
8.
Lampert, P., and Thurlimann, B. (1968). “Torsion tests of reinforced concrete beams.” Bericht Nr. 6506‐2, Institut fur Baustatic, Zurich, Switzerland.
9.
Lessig, N. N. (1959). “Determination of load carrying capacity of reinforced concrete element with rectangular cross‐section subjected to flexure with torsion,” Proc. Concrete and Reinforced Concrete Inst., Moscow, USSR, 5–28.
10.
Mansur, M. A., and Hasnat, A. (1979). “Concrete beams with small opening under torsion.” J. Struct. Div., ASCE, 105(ST11), 2433–2447.
11.
Mansur, M. A., Ting, S. K., and Lee, S. L. (1983). “Ultimate torque of R/C beams with large openings.” J. Struct. Div., ASCE, 109(8) 1887–1902.
12.
Mansur, M. A., and Paramasivam, P. (1984). “Reinforced concrete beams with small opening in bending and torsion.” Amer. Concrete Inst. J., 81(2), 180–185.
13.
McMullen, A. E., and Warwaruk, J. (1970). “Concrete beams in bending, torsion and shear.” J. Struct. Div., ASCE, 96(ST5), 885–903.
14.
McMullen, A. E., and Daniel, H. R. (1975). “Torsional strength of longitudinally reinforced beams containing an opening.” Amer. Concrete Inst. J., 72(8), 415–420.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Oct 1, 1987
Published in print: Oct 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.