Reliability‐Based Code Formulations for Reinforced Concrete Buildings
Publication: Journal of Structural Engineering
Volume 113, Issue 10
Abstract
The current version of ACI Standard 318 on reinforced concrete design uses an overall resistance factor on structural action to account for uncertainty in the resistance variables. Partial resistance factors also may be used to address the different sources of variability directly; such a format may be advantageous for reinforced concrete. First‐order, second‐moment reliability analysis methods are used to develop partial resistance factors that are compatible with the load requirements of ANSI Standard A58.1‐1982. Flexure, compression plus bending, and shear limit states are analyzed. The consistency of reliabilities afforded by alternate resistance factor formats are compared, and the performance from a reliability viewpoint of certain key code provisions is investigated.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allen, D. E. (1975). “Limit states design‐a probabilistic study.” Canad. J. Civ. Engrg., 2, 36–49.
2.
Ang, A. H.‐S., and Cornell, C. A. (1974). “Reliability bases of structural safety and design.” J. Struct. Div., ASCE, 100(ST9), 1755–1769.
3.
“Building code requirements for reinforced concrete.” ACI Standard 318‐83. (1983). Amer. Concrete Inst., Detroit, Mich.
4.
Corotis, R. B. (1985). “Probability‐based design codes.” Concrete Int: Design and Construct., 7,(4), 42–44.
5.
“Design of concrete structures for buildings: a national standard of Canada.” (CAN3‐A23.3‐M84). (1984). Canadian Standards Assoc., Toronto, Canada.
6.
Ellingwood, B. R. (1977). “Statistical analysis of reinforced concrete beam‐column interaction.” J. Struct. Div., ASCE, 103(ST7), 1377–1388.
7.
Ellingwood, B. R., et al. (1980). “Development of a probability‐based load criterion for american national standard A58.” Nat. Bureau of Standards Special Pub. No. 577.
8.
Ellingwood, B. R. (1982). “Safety checking formats for limit state design.” J. Struct. Div., ASCE, 108(ST7), 1481–1493.
9.
Ellingwood, B. R., and Ang, A. H.‐S. (1974). “Risk‐based evaluation of design criteria.” J. Struct. Div., ASCE, 100(ST9), 1771–1788.
10.
Grant, L. H., Mirza, S. A., and MacGregor, J. G. (1978). “Monte Carlo study of strength of concrete columns.” J. Amer. Concrete Inst., 75(8), 348–358.
11.
Hasofer, A. M., and Lind, N. C. (1974). “Exact and invariant second‐moment code format.” J. Engrg. Mech. Div., ASCE, 100(EM1), 111–121.
12.
MacGregor, J. G. (1983). “Load and resistance factors for concrete design.” J. Amer. Concrete Inst., 80(4).
13.
MacGregor, J. G., Mirza, S. A., and Ellingwood, B. R. (1983). “Statistical analysis of resistance of reinforced and prestressed concrete members.” J. Amer. Concrete Inst., 80(3), 167–176.
14.
“Minimum design loads for buildings and other structures.” (ANSI A58.1‐1982). (1982). Amer. Nat. Standards Inst., New York, N.Y.
15.
“Proposed revisions of building code requirements for reinforced concrete (ACI Standard 318–56).” (1962). J. Amer. Concrete Inst., 59(2), 145–276.
16.
Rackwitz, R., and Fiessler, B. (1978). “Structural reliability under combined random load sequences.” Computers and Structures, 9, 489–494.
17.
Ravindra, M. K., Lind, N. C., and Siu, W. (1974). “Illustrations of reliability‐based design.” J. Struct. Div., ASCE, 100, (ST9), 1789–1812.
18.
Zsutty, T. C. (1971). “Shear strength prediction for separate categories of simple beam tests.” J. Amer. Concrete Inst., 68(2), 138–143.
Information & Authors
Information
Published In
Copyright
Copyright © 1987 ASCE.
History
Published online: Oct 1, 1987
Published in print: Oct 1987
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.