Stiffness Matrix for Geometric Nonlinear Analysis
Publication: Journal of Structural Engineering
Volume 112, Issue 4
Abstract
A new stiffness matrix for the analysis of thin walled beams is derived. Starting from the principle of virtual displacements, an updated Lagrangian procedure for nonlinear analysis is developed. Inclusion of nonuniform torsion is accomplished through adoption of the principle of sectorial areas for cross‐sectional displacements. This requires incorporation of a warping degree of freedom in addition to the conventional six degrees of freedom at each end of the element. Problems encountered in the use of this and similar matrices in three‐dimensional analysis are described.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Argyris, J. H., Dunne, P. C., Malejannakis, G. A., and Scharpf, D. W., “On Large Displacement—Small Strain Analysis of Structures with Rotational Degrees of Freedom,” Computer Methods in Applied Mechanics and Engineering, Vol. 14, 1978, pp. 401–451,
and Vol. 15, 1978, pp. 99–135.
2.
Argyris, J. H., Hilbert, O., Malejannakis, G. A., and Scharpf, D. W., “On the Geometrical Stiffness of a Beam in Space—a Consistent V.W. Approach,” Computer Methods in Applied Mechanics and Engineering, Vol. 20, 1979, pp. 105–131.
3.
Barsoum, R. S., “A Finite Element Formulation for the General Stability Analysis of Thin‐Walled Members,” thesis presented to Cornell Univ., at Ithaca, NY, in 1970, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
4.
Barsoum, R. S., and Gallagher, R. H., “Finite Element Analysis of Torsional‐Flexural Stability Problems,” International Journal for Numerical Methods in Engineering, Vol. 2, 1970, pp. 335–352.
5.
Bathe, K.‐J., and Bolourchi, S., “Large Displacement Analysis of Three‐Dimensional Beam Structures,” International Journal for Numerical Methods in Engineering, Vol. 14, 1979, pp. 961–986.
6.
Bathe, K.‐J., Ramm, E., and Wilson, E. L., “Finite Element Formulation for Large Deformation Dynamic Analysis,” International Journal for Numerical Methods in Engineering, Vol. 9, 1975, pp. 353–386.
7.
Bažant, Z. P., and El Nimeiri, M., “Large‐Deflection Spatial Buckling of Thin‐Walled Beams and Frames, Journal of the Engineering Mechanics Division, ASCE, Vol. 79, No. EM6, Dec., 1973, pp. 1259–1281.
8.
Chu, K. H., and Rampetsreiter, R. H., “Large Deflection Buckling of Space Frames,” Journal of the Structural Division, ASCE, Vol. 98, No. ST12, Dec., 1972, pp. 2701–2722.
9.
Connor, J. J., Jr., Logcher, R. D., and Chen, S. C., “Nonlinear Analysis of Elastic Framed Structures,” Journal of the Structural Division, ASCE, Vol. 94, No. ST6, June, 1968, pp. 1525–1547.
10.
Krajcinovic, D., “A Consistent Discrete Elements Technique for Thin‐Walled Assemblages,” International Journal of Solids and Structures, Vol. 5, 1969, pp. 639–662.
11.
Love, A. E. H., A Treatise on the Mathematical Theory of Elasticity, 4th ed., Dover Publication, NY, 1944.
12.
Mei, C., “Coupled Vibrations of Thin‐Walled Beams of Open Section Using the Finite Element Method,” International Journal of Mechanical Sciences, Pergarnon Press, New York, NY, Vol. 12, 1970, pp. 883–891.
13.
Rajasekaran, S., “Finite Element Methods for Plastic Beam‐Columns,” Theory of Beam‐Columns, Space Behavior and Design, Vol. 2, Chap. 12, W. F. Chen, and T. Atsuta, Eds., McGraw‐Hill, NY, 1977, pp. 539–608.
14.
Renton, J. D., “Stability of Space Frames by Computer Analysis,” Journal of the Structural Division, ASCE, Vol. 88, No. ST4, Aug., 1962, pp. 81–103.
15.
Vlasov, V. Z., Thin‐Walled Elastic Beams, 2nd ed., Moscow, USSR, 1959;
English translation, Israel Program for Scientific Translation, Jerusalem, Israel Program for Scientific Translation, Jerusalem, Israel, 1961.
16.
Washizu, K., Variational Methods in Elasticity and Plasticity, 2nd ed., Pergamon Press, New York, NY, 1961.
17.
Yang, Y. B., “Linear and Nonlinear Analysis of Space Frames with Nonuniform Torsion Using Interactive Computer Graphics,” thesis presented to Cornell Univ., at Ithaca, NY, in 1984, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
18.
Yang, Y. B., and McGuire, W., “Joint Rotations and Geometric Nonlinear Analysis,” Journal of Structural Engineering, ASCE, Vol. 112, No. ST4, Apr., 1986, pp. 879–905.
19.
Yoo, C. H., “Bimoment Contribution to Stability of Thin‐Walled Assemblages,” Computer and Structures, Vol. 11, 1980, pp. 465–471.
20.
Zarghamee, M. S., and Shah, J. M., “Stability of Spaceframes,” Journal of the Engineering Mechanics Division, ASCE, Vol. 94, No. EM2, Apr., 1968, pp. 371–384.
21.
Ziegler, H., Principal of Structural Stability, 2nd ed., Birkhauser Verlag, Basel und Stuttgart, 1977.
Information & Authors
Information
Published In
Copyright
Copyright © 1986 ASCE.
History
Published online: Apr 1, 1986
Published in print: Apr 1986
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.