Structural Behavior of Wood Shear Wall Assemblies
Publication: Journal of Structural Engineering
Volume 111, Issue 3
Abstract
The paper is a summary of the results of an experimental program conducted at the University of Texas to investigate the structural behavior of 7 shear wall assemblies used in manufactured housing. Variables studied include the size and location of the shear wall within the assembly, the number of glued sides of hardwood paneling, and the number of floor joists beneath the shear wall. It was found that walls located on the windward side of the assembly had higher ultimate strengths. In addition, measurements of slip between the shear wall and side walls indicate that there may be significant load transfer into the side wall. Also, the side walls, it was found, do not provide rigid vertical support to the joists beneath the shear wall, as currently assumed in design.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
American Society for Testing Materials, “Static Load Test for Shear Resistance of Framed Walls for Buildings,” ASTM E 564‐76, Annual Book of ASTM Standards, pp. 886–993.
2.
Caudle, B., and Fowler, D. W., “Behavior of Plywood Shear Walls with Door Openings Subjected to In‐Plane Loading,” Report MH 5 for the Manufactured Housing Division, Texas Dept. of Labor and Standards, Univ. of Texas at Austin, Dec., 1980.
3.
Dishongh, B. E., and Fowler, D. W., “Structural Performance of Gypsum Paneled Shear Walls for Mobile Homes,” Report MH 9 for the Manufactured Housing Division, Texas Dept. of Labor and Standards, Univ. of Texas at Austin, Aug., 1980.
4.
Easley, J. T., Foomani, M., and Dodds, R. H., “Formulas for Wood Shear Walls,” Journal of the Structural Division, ASCE, Vol. 108, No. ST11, Nov., 1982.
5.
Hodge, William G., “Investigation of the Structural Behavior of Gypsum Board and Hardwood Paneled Shear Walls,” thesis presented to the University of Texas, at Austin, Tex., in 1982, in partial fulfillment of the requirements for the degree of Masters of Science.
6.
Itani, R. Y., Tuomi, R. L., and McCutcheon, W. J., “Methodology to Evaluate Racking Resistance of Nailed Walls,” Forest Products Journal, Vol. 32, No. 1, Jan., 1982.
7.
Montee, L. R., and Fowler, D. W., “The Behavior of Mobile Home Shear Walls with Window Openings Subjected to In‐Plane Lateral Loads,” Report MH 7 for the Manufactured Housing Div., Texas Dept. of Labor and Standards, Univ. of Texas at Austin, May, 1981.
8.
Nelson, E. L., “Structural Behavior of Wood Shear Wall Assemblies Used in Manufactured Housing,” thesis presented to the University of Texas, at Austin, Tex., in 1983, in partial fulfillment of the requirements for the degree of Masters of Science.
9.
Normandin, S., and Fowler, D. W., “Behavior of Mobile Home Paneled Shear Walls without Openings,” Report MH 3 for the Manufactured Housing Div., Texas Dept. of Labor and Standards, University of Texas at Austin, May, 1979.
10.
Powell, M., Wheat, D. L., and Fowler, D. W., “Strength and Behavior of Shear Walls Used in Mobile Homes,” Report DHUD 84‐1 for the U.S. Dept. of Housing and Urban Development, Contract No. HC‐5468, Univ. of Texas at Austin, Jan., 1984.
11.
Tuomi, R. L., and Gromala, D. S., “Racking Strength of Walls: Let‐in Corner Bracing, Sheet Materials, and Effect of Loading Rate,” USDA Forest Service Research Paper FPL 301, Forest Products Lab., Madison, Wisc., 1977.
12.
Tuomi, R. L., and McCutcheon, W. J., “Racking Strength of Light‐Frame Nailed Walls,” Journal of the Structural Division, ASCE, Vol. 104, No. ST7, July, 1978.
Information & Authors
Information
Published In
Copyright
Copyright © 1985 ASCE.
History
Published online: Mar 1, 1985
Published in print: Mar 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.