Structural Optimization Using Reliability Concepts
Publication: Journal of Structural Engineering
Volume 111, Issue 11
Abstract
An overview of the major concepts and methods used in reliabilitybased structural optimization is presented. New formulations related to multicriteria optimization are developed. Comparative results are presented when different criteria are used for the optimum design of a structure under service and ultimate reliability constraints. It is concluded that reliability‐based optimization is now practicable for structural engineers. The writing of appropriate reliability‐based optimum design software is a vital element at present receiving too little attention.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ang, A. H.‐S., and Ma, H.‐F., “On the Reliability of Structural Systems,” Proceedings of the Third International Conference on Structural Safety and Reliability: ICOSSAR '81, Trondheim, Norway, June 23–25, 1981, pp. 295–314.
2.
Balling, R. J., Pister, K. S., and Polak, E., “DELIGHT.STRUCT: An Optimization Based Computer‐Aided Design Environment for Structural Engineering,” Computer Methods in Applied Mechanics and Engineering, Vol. 38, 1983, pp. 237–251.
3.
Benjamin, J. R., “Probabilistic Structural Analysis and Design,” Journal of the Structural Division, ASCE, Vol. 94, No. ST7, July, 1968, pp. 1665–1679.
4.
Carmichael, D. G., “Probabilistic Optimal Design of Framed Structures,” Computer‐Aided Design, Vol. 13, No. 5, 1981, pp. 261–264.
5.
Chou, K. C., McIntosh, C., and Corotis, R. B., “Observations on Structural System Reliability and the Role of Modal Correlations,” Structural Safety, Vol. 1, 1983, pp. 189–198.
6.
Cornell, C. A., “Bounds on the Reliability of Structural Systems,” Journal of the Structural Division, Vol. 93, No. ST1, Feb., 1967, pp. 171–200.
7.
Cornell, C. A., “Bayesian Statistical Decision Theory and Reliability‐Based Design,” Proceedings of the International Conference on Structural Safety and Reliability, Washington, D.C., Apr., 1969, pp. 47–66.
8.
Ditlevsen, O., “Narrow Reliability Bounds for Structural Systems,” Journal of Structural Mechanics, Vol. 7, No. 4, 1979, pp. 453–472.
9.
Ellingwood, B., and Galambos, T. V., “Probability‐Based Criteria for Structural Design,” Structural Safety, Vol. 1, 1982, pp. 15–26.
10.
Ferry‐Borges, J., “O Dimensionamento de Estruturas,” Publicn 54, Ministry of Public Works, National Laboratory of Civil Engineering, Lisbon, Portugal, 1954.
11.
Forsell, C., “Ekonomi och Byggnadsvasen,” (Economy and Construction), Sunt Fomoft, Apr., 1924, pp. 74–77.
12.
Frangopol, D. M., “A Reliability‐Based Optimization Technique for Automatic Plastic Design,” Computer Methods in Applied Mechanics and Engineering, Vol. 44, No. 1, 1984, pp. 105–117.
13.
Frangopol, D. M., “Interactive Reliability‐Based Structural Optimization,” Computers and Structures, Vol. 19, No. 4, 1984, pp. 559–563.
14.
Frangopol, D. M., “Sensitivity of Reliability‐Based Optimum Design,” Journal of Structural Engineering, ASCE, Vol. 111, No. 8, Aug., 1985, pp. 1703–1721.
15.
Frangopol, D. M., “Towards Reliability‐Based Computer‐Aided Optimization of Reinforced Concrete Structures,” Engineering Optimization, Vol. 8, No. 4, 1985, pp. 301–313.
16.
Frangopol, D. M., “Multi‐Criteria Reliability‐Based Optimization of Structural Systems,” Proceedings of the International Conference on Structural Safety and Reliability: ICOSSAR '85, Vol. 3, Kobe, Japan, May 27–29, 1985, pp. 591–595.
17.
Freudenthal, A. M., “Safety and the Probability of Structural Failure,” Transactions, ASCE, Vol. 121, 1956, pp. 1337–1375.
18.
Gavarini, D., “Stochastic Programming—A Discussion,” in Optimum Structural Design (edited by R. H. Gallagher and O. C. Zienkiewicz), John Wiley, New York, N.Y., 1973, pp. 261–264.
19.
Hilton, H. H., and Feigen, M., “Minimum Weight Analysis Based on Structural Reliability,” Journal of the Aerospace Sciences, Vol. 27, 1960, pp. 641–653.
20.
Johnson, A. I., “Strength, Safety and Economical Dimensions of Structures,” Bulletin, Division of Building Statistics and Structural Engineering, Royal Institute of Technology, No. 12, Stockholm, Sweden, 1953.
21.
Kalaba, R. E., “Design of Minimum Weight Structures Given Reliability and Cost,” Journal of the Aerospace Science, Vol. 29, 1962, pp. 355–356.
22.
Khachaturian N., and Haider, G. S., “Probabilistic Design of Determinate Structures,” Proceedings of the Specialty Conference, EMD‐ASCE, Oct., 1966, pp. 623–647.
23.
Khachaturian, N. A., “Basic Concepts in Structural Optimization,” in An Introduction to Structural Optimization, M. Z. Cohn, Ed., Solid Mechanics Division, University of Waterloo, Study No. 1, 1969, pp. 1–18.
24.
Kinser, D. E., “Elastic Minimum Weight Design with a Probability of Failure Constraint,” thesis, presented to Case Institute of Technology, at Cleveland, Ohio, in 1966, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
25.
Lind, N. C., and Basler, E., “Safety Level Decisions,” Proceedings of the International Conference on Planning and Design of Tall Buildings, Lehigh University, Pa., Aug., 21–26, 1972, pp. 961–972.
26.
Mau, S.‐T., “Optimal Design of Structures with a Minimum Expected Cost Criterion,” Report No. 340, Dept. of Structural Engineering, Cornell University, Ithaca, N.Y., 1971.
27.
Moses, F., and Kinser, D. E., “Optimum Structural Design with Failure Probability Constraints,” AIAA Journal, Vol. 5, No. 6, June, 1967, pp. 1152–1158.
28.
Moses, F., “Approaches to Structural Reliability and Optimization,” in: An Introduction to Structural Optimization, M. Z. Conn, Ed., Solid Mechanics Division, University of Waterloo, Study No. 1, 1969, pp. 81–120.
29.
Moses, F., “Sensitivity Studies in Structural Reliability,” in: Structural Reliability and Codified Design, N. C. Lind, Ed., Solid Mechanics Division, University of Waterloo, Study No. 2, 1970, pp. 1–17.
30.
Moses, F., “Design for Reliability—Concepts arid Applications,” in: Optimum Structural Design, R. H. Gallagher and O. C. Zienkiewicz, Eds., John Wiley, New York, N.Y., 1973, pp. 241–261.
31.
Moses, F., “Structural System Reliability and Optimization,” Computers and Structures, Vol. 7, 1977, pp. 283–290.
32.
Nowak, A. S., “Sensitivity Analysis for Human Errors,” Proceedings Fourth International Conference on Applications of Statistics and Probability in Soil and Structural Engineering, Vol. 1, Florence, Italy, 1983, pp. 729–739.
33.
Paez, A., and Torroja, E., “La Determinancion del Coefficiente de Seguridad en las Distintas Obras,” Inst. Technico de la Construccion y del Cemento, Madrid, Spain, 1959.
34.
Parimi, S. R., and Cohn, M. Z., “Optimal Solutions in Probabilistic Structural Design,” Journal of Applied Mechanics, Vol. 2, 1978, pp. 47–92.
35.
Rosenblueth, E., and Mendoza, E., “Reliability Optimization in Isostatic Structures,” Journal of the Engineering Mechanics Division, Vol. 97, No. EM6, 1971, pp. 1625–1642.
36.
Rosenblueth, E., “Code Specification of Safety and Serviceability,” Proceedings of the International Conference on Planning and Design of Tall Buildings, Vol. Ib, Lehigh University, Pa., August 21–26, 1972, pp. 931–959.
37.
Schmit, L. A., “Problem Formulation, Methods and Solutions in the Optimum Design of Structures,” in: An Introduction to Structural Optimization, M. Z. Cohn, Ed., Solid Mechanics Division, University of Waterloo, Study No. 1, 1969, pp. 19–46.
38.
Schmit, L. A., “Structural Synthesis—Its Genesis and Development,” AIAA Journal, Vol. 19, No. 10, Oct., 1981, pp. 1249–1262.
39.
Somekh, E., and Kirsch, U., “Interactive Optimal Design of Truss Structures,” Computer‐Aided Design, Vol. 13, No. 5, 1981, pp. 253–259.
40.
Switzky, H., “Minimum Weight Design with Structural Reliability,” Proceedings of the Fifth AIAA Annual Structures and Materials Conference, 1964, pp. 316–322.
41.
Turkstra, C. J., “Choice of Failure Probabilities,” Journal of the Structural Division, Vol. 93, No. ST6, Dec., 1967, pp. 189–200.
42.
Turkstra, C. J., Theory of Structural Design Decisions, N. C. Lind, Ed., Solid Mechanics Division, University of Waterloo, Study No. 2, 1970.
43.
Vanderplaats, G. N., Numerical Optimization Techniques for Engineering Design, McGraw‐Hill, New York, N.Y., 1984.
44.
Vanmarcke, E. H., “Matrix Formulation of Reliability Analysis and Reliability‐Based Design,” Computers and Structures, Vol. 3, 1971, pp. 757–770.
45.
Vanmarcke, E. H., Diaz‐Padilla, J., and Roth, D. A., “Reliability‐Based Optimum Design of Simple Plastic Frames,” Massachusetts Institute of Technology, Research Report R72‐46, Cambridge, Mass., Aug., 1972.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 111 • Issue 11 • November 1985
Pages: 2288 - 2301
Copyright
Copyright © 1985 ASCE.
History
Published online: Nov 1, 1985
Published in print: Nov 1985
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.